[PATCH 07/16] qla2xxx: add retry for exec fw

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Quinn Tran <qutran@xxxxxxxxxxx>

Per FW request, Exec FW can fail due to temp error resulting in driver not
attaching to the adapter. Add retry of this command up to 4 retries.

Signed-off-by: Quinn Tran <qutran@xxxxxxxxxxx>
Signed-off-by: Nilesh Javali <njavali@xxxxxxxxxxx>
---
 drivers/scsi/qla2xxx/qla_mbx.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index 38e0f02c75e1..c4bd8a16d78c 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -689,7 +689,7 @@ qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr)
 	mbx_cmd_t *mcp = &mc;
 	u8 semaphore = 0;
 #define EXE_FW_FORCE_SEMAPHORE BIT_7
-	u8 retry = 3;
+	u8 retry = 5;
 
 	ql_dbg(ql_dbg_mbx + ql_dbg_verbose, vha, 0x1025,
 	    "Entered %s.\n", __func__);
@@ -764,6 +764,12 @@ qla2x00_execute_fw(scsi_qla_host_t *vha, uint32_t risc_addr)
 			goto again;
 		}
 
+		if (retry) {
+			retry--;
+			ql_dbg(ql_dbg_async, vha, 0x509d,
+			    "Exe FW retry: mb[0]=%x retry[%d]\n", mcp->mb[0], retry);
+			goto again;
+		}
 		ql_dbg(ql_dbg_mbx, vha, 0x1026,
 		    "Failed=%x mb[0]=%x.\n", rval, mcp->mb[0]);
 		vha->hw_err_cnt++;
-- 
2.23.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux