On 9/28/21 6:54 PM, Don Brace wrote:
From: Mike McGowen <Mike.McGowen@xxxxxxxxxxxxx>
Added PCI ID information for the
Adaptec SmartRAID 3252-8i controller:
9005 / 028F / 9005 / 14A2
Reviewed-by: Scott Benesh <scott.benesh@xxxxxxxxxxxxx>
Reviewed-by: Scott Teel <scott.teel@xxxxxxxxxxxxx>
Signed-off-by: Mike McGowen <Mike.McGowen@xxxxxxxxxxxxx>
Signed-off-by: Don Brace <don.brace@xxxxxxxxxxxxx>
Acked-by: John Donnelly <john.p.donnelly@xxxxxxxxxx>
---
drivers/scsi/smartpqi/smartpqi_init.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/scsi/smartpqi/smartpqi_init.c b/drivers/scsi/smartpqi/smartpqi_init.c
index 8be116992cb0..ffa217874352 100644
--- a/drivers/scsi/smartpqi/smartpqi_init.c
+++ b/drivers/scsi/smartpqi/smartpqi_init.c
@@ -9287,6 +9287,10 @@ static const struct pci_device_id pqi_pci_id_table[] = {
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
PCI_VENDOR_ID_ADAPTEC2, 0x14a1)
},
+ {
+ PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
+ PCI_VENDOR_ID_ADAPTEC2, 0x14a2)
+ },
{
PCI_DEVICE_SUB(PCI_VENDOR_ID_ADAPTEC2, 0x028f,
PCI_VENDOR_ID_ADAPTEC2, 0x14b0)
