The ata device flag ATA_DFLAG_NCQ_PRIO indicates if a device supports
the NCQ Priority feature while the ATA_DFLAG_NCQ_PRIO_ENABLE device
flag indicates if the feature is enabled. Enabling NCQ priority use is
controlled by the user through the device sysfs attribute
ncq_prio_enable. As a result, the ATA_DFLAG_NCQ_PRIO flag should not be
cleared when ATA_DFLAG_NCQ_PRIO_ENABLE is not set as the device still
supports the feature even after the user disables it. This leads to the
following cleanups:
- In ata_build_rw_tf(), set a command high priority bit based on the
ATA_DFLAG_NCQ_PRIO_ENABLE flag, not on the ATA_DFLAG_NCQ flag. That
is, set a command high priority only if the user enabled NCQ priority
use.
- In ata_dev_config_ncq_prio(), ATA_DFLAG_NCQ_PRIO should not be cleared
if ATA_DFLAG_NCQ_PRIO_ENABLE is not set. If the device does not
support NCQ priority, both ATA_DFLAG_NCQ_PRIO and
ATA_DFLAG_NCQ_PRIO_ENABLE must be cleared.
With the above ata_dev_config_ncq_prio() change, ATA_DFLAG_NCQ_PRIO flag
is set on device scan and revalidation. There is no need to trigger a
device revalidation in ata_ncq_prio_enable_store() when the user enables
the use of NCQ priority. Remove the revalidation code from that funciton
to simplify it. Also change the return value from -EIO to -EINVAL when a
user tries to enable NCQ priority for a device that does not support
this feature. While at it, also simplify ata_ncq_prio_enable_show().
Overall, there is no functional change introduced by this patch.
Signed-off-by: Damien Le Moal <damien.lemoal@xxxxxxx>
Reviewed-by: Hannes Reinecke <hare@xxxxxxx>
---
drivers/ata/libata-core.c | 32 ++++++++++++++------------------
drivers/ata/libata-sata.c | 37 ++++++++++++-------------------------
2 files changed, 26 insertions(+), 43 deletions(-)
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index d3076283f9ce..3e574e29ee37 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -712,11 +712,9 @@ int ata_build_rw_tf(struct ata_taskfile *tf, struct ata_device *dev,
if (tf->flags & ATA_TFLAG_FUA)
tf->device |= 1 << 7;
- if (dev->flags & ATA_DFLAG_NCQ_PRIO) {
- if (class == IOPRIO_CLASS_RT)
- tf->hob_nsect |= ATA_PRIO_HIGH <<
- ATA_SHIFT_PRIO;
- }
+ if (dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLE &&
+ class == IOPRIO_CLASS_RT)
+ tf->hob_nsect |= ATA_PRIO_HIGH << ATA_SHIFT_PRIO;
} else if (dev->flags & ATA_DFLAG_LBA) {
tf->flags |= ATA_TFLAG_LBA;
@@ -2178,11 +2176,6 @@ static void ata_dev_config_ncq_prio(struct ata_device *dev)
struct ata_port *ap = dev->link->ap;
unsigned int err_mask;
- if (!(dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLE)) {
- dev->flags &= ~ATA_DFLAG_NCQ_PRIO;
- return;
- }
-
err_mask = ata_read_log_page(dev,
ATA_LOG_IDENTIFY_DEVICE,
ATA_LOG_SATA_SETTINGS,
@@ -2190,18 +2183,21 @@ static void ata_dev_config_ncq_prio(struct ata_device *dev)
1);
if (err_mask) {
ata_dev_dbg(dev,
- "failed to get Identify Device data, Emask 0x%x\n",
+ "failed to get SATA settings log, Emask 0x%x\n",
err_mask);
- return;
+ goto not_supported;
}
- if (ap->sector_buf[ATA_LOG_NCQ_PRIO_OFFSET] & BIT(3)) {
- dev->flags |= ATA_DFLAG_NCQ_PRIO;
- } else {
- dev->flags &= ~ATA_DFLAG_NCQ_PRIO;
- ata_dev_dbg(dev, "SATA page does not support priority\n");
- }
+ if (!(ap->sector_buf[ATA_LOG_NCQ_PRIO_OFFSET] & BIT(3)))
+ goto not_supported;
+
+ dev->flags |= ATA_DFLAG_NCQ_PRIO;
+
+ return;
+not_supported:
+ dev->flags &= ~ATA_DFLAG_NCQ_PRIO_ENABLE;
+ dev->flags &= ~ATA_DFLAG_NCQ_PRIO;
}
static int ata_dev_config_ncq(struct ata_device *dev,
diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c
index 8adeab76dd38..dc397ebda089 100644
--- a/drivers/ata/libata-sata.c
+++ b/drivers/ata/libata-sata.c
@@ -839,23 +839,17 @@ static ssize_t ata_ncq_prio_enable_show(struct device *device,
char *buf)
{
struct scsi_device *sdev = to_scsi_device(device);
- struct ata_port *ap;
+ struct ata_port *ap = ata_shost_to_port(sdev->host);
struct ata_device *dev;
bool ncq_prio_enable;
int rc = 0;
- ap = ata_shost_to_port(sdev->host);
-
spin_lock_irq(ap->lock);
dev = ata_scsi_find_dev(ap, sdev);
- if (!dev) {
+ if (!dev)
rc = -ENODEV;
- goto unlock;
- }
-
- ncq_prio_enable = dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLE;
-
-unlock:
+ else
+ ncq_prio_enable = dev->flags & ATA_DFLAG_NCQ_PRIO_ENABLE;
spin_unlock_irq(ap->lock);
return rc ? rc : snprintf(buf, 20, "%u\n", ncq_prio_enable);
@@ -869,7 +863,7 @@ static ssize_t ata_ncq_prio_enable_store(struct device *device,
struct ata_port *ap;
struct ata_device *dev;
long int input;
- int rc;
+ int rc = 0;
rc = kstrtol(buf, 10, &input);
if (rc)
@@ -883,27 +877,20 @@ static ssize_t ata_ncq_prio_enable_store(struct device *device,
return -ENODEV;
spin_lock_irq(ap->lock);
+
+ if (!(dev->flags & ATA_DFLAG_NCQ_PRIO)) {
+ rc = -EINVAL;
+ goto unlock;
+ }
+
if (input)
dev->flags |= ATA_DFLAG_NCQ_PRIO_ENABLE;
else
dev->flags &= ~ATA_DFLAG_NCQ_PRIO_ENABLE;
- dev->link->eh_info.action |= ATA_EH_REVALIDATE;
- dev->link->eh_info.flags |= ATA_EHI_QUIET;
- ata_port_schedule_eh(ap);
+unlock:
spin_unlock_irq(ap->lock);
- ata_port_wait_eh(ap);
-
- if (input) {
- spin_lock_irq(ap->lock);
- if (!(dev->flags & ATA_DFLAG_NCQ_PRIO)) {
- dev->flags &= ~ATA_DFLAG_NCQ_PRIO_ENABLE;
- rc = -EIO;
- }
- spin_unlock_irq(ap->lock);
- }
-
return rc ? rc : len;
}
--
2.31.1
