Re: libata /dev/scd0 problem: mount after burn fails without eject

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Michal Piotrowski wrote:
> On 01/05/07, Mark Lord <lkml@xxxxxx> wrote:
>> Forwarding to linux-scsi and linux-ide mailing lists.
>>
>> Frank van Maarseveen wrote:
>> > Tested on 2.6.20.6 and 2.6.21.1
>> >
>> > I decided to swich from the old IDE drivers to libata and now there
>> > seems to be a little but annoying problem: cannot mount an ISO image
>> > after burning it.
>> >
>> > May  1 14:32:55 kernel: attempt to access beyond end of device
>> > May  1 14:32:55 kernel: sr0: rw=0, want=68, limit=4
>> > May  1 14:32:55 kernel: isofs_fill_super: bread failed, dev=sr0,
>> iso_blknum=16, block=16
>> >
>> > an "eject" command seems to fix the state of the PATA DVD writer
>> > or driver. The problem occurs for burning a CD and for DVD too with
>> > identical error messages.

Right after burning, if you run 'fuser -v /dev/sr0', what does it say?

-- 
tejun
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux