On Wed, 2007-03-28 at 10:43 -0700, Sumant Patro wrote:
> eh_timed_out call back (megasas_reset_timer) is used to throttle io to the adapter
> when it is called the first time for a scmd.
> The MEGASAS_FW_BUSY flag is set and can_queue reduced to 16. The can_queue is restored
> from completion routine in following two conditions : 5 seconds has elapsed and the # of
> outstanding cmds in FW is < 17.
>
> Signed-off-by: Sumant Patro <sumant.patro@xxxxxxx>
> ---
> drivers/scsi/megaraid/megaraid_sas.c | 65 +++++++++++++++++++++++--
> drivers/scsi/megaraid/megaraid_sas.h | 13 +++--
> 2 files changed, 70 insertions(+), 8 deletions(-)
>
> This patch requires the patch submitted by James with subject line :
>
> [PATCH] expose eh_timed_out to the host template
>
> diff -uprN linux-2.6.orig/drivers/scsi/megaraid/megaraid_sas.c linux-2.6.new/drivers/scsi/megaraid/megaraid_sas.c
> --- linux-2.6.orig/drivers/scsi/megaraid/megaraid_sas.c 2007-03-28 08:41:49.000000000 -0700
> +++ linux-2.6.new/drivers/scsi/megaraid/megaraid_sas.c 2007-03-28 08:36:38.000000000 -0700
> @@ -10,7 +10,7 @@
> * 2 of the License, or (at your option) any later version.
> *
> * FILE : megaraid_sas.c
> - * Version : v00.00.03.10-rc1
> + * Version : v00.00.03.10-rc3
> *
> * Authors:
> * (email-id : megaraidlinux@xxxxxxx)
> @@ -886,6 +886,7 @@ megasas_queue_command(struct scsi_cmnd *
> goto out_return_cmd;
>
> cmd->scmd = scmd;
> + scmd->SCp.ptr = (char *)cmd;
>
> /*
> * Issue the command to the FW
> @@ -981,8 +982,8 @@ static int megasas_generic_reset(struct
>
> instance = (struct megasas_instance *)scmd->device->host->hostdata;
>
> - scmd_printk(KERN_NOTICE, scmd, "megasas: RESET -%ld cmd=%x\n",
> - scmd->serial_number, scmd->cmnd[0]);
> + scmd_printk(KERN_NOTICE, scmd, "megasas: RESET -%ld cmd=%x retries=%x\n",
> + scmd->serial_number, scmd->cmnd[0], scmd->retries);
>
> if (instance->hw_crit_error) {
> printk(KERN_ERR "megasas: cannot recover from previous reset "
> @@ -1000,6 +1001,40 @@ static int megasas_generic_reset(struct
> }
>
> /**
> + * megasas_reset_timer - quiesce the adapter if required
> + * @scmd: scsi cmnd
> + *
> + * Sets the FW busy flag and reduces the host->can_queue if the
> + * cmd has not been completed within the timeout period.
> + */
> +static enum
> +scsi_eh_timer_return megasas_reset_timer(struct scsi_cmnd *scmd)
> +{
> + struct megasas_cmd *cmd = (struct megasas_cmd *)scmd->SCp.ptr;
> + struct megasas_instance *instance;
> + unsigned long flags;
> +
> + if (cmd) {
I don't believe we can ever get a command timeout with no command, can
we?
> + if (time_after(jiffies, scmd->jiffies_at_alloc + 170 * HZ))
> + return EH_NOT_HANDLED;
This 170s is a bit arbitrary ... surely you want it to be related to a
multiple of scmd->timeout_per_command?
> + instance = cmd->instance;
> + if (!(instance->flag & MEGASAS_FW_BUSY)) {
> + /* FW is busy, throttle IO */
> + spin_lock_irqsave(&instance->throttle_io_lock, flags);
> +
> + instance->host->can_queue = 16;
can_queue is protected by the host lock ... I think you need to dump the
throttle_io_lock and simply use the host lock for all of this.
> + instance->last_time = jiffies;
> + instance->flag |= MEGASAS_FW_BUSY;
> +
> + spin_unlock_irqrestore(&instance->throttle_io_lock, flags);
> + }
> + return EH_RESET_TIMER;
> + }
> + return EH_HANDLED;
> +}
> +
> +/**
> * megasas_reset_device - Device reset handler entry point
> */
> static int megasas_reset_device(struct scsi_cmnd *scmd)
> @@ -1112,6 +1147,7 @@ static struct scsi_host_template megasas
> .eh_device_reset_handler = megasas_reset_device,
> .eh_bus_reset_handler = megasas_reset_bus_host,
> .eh_host_reset_handler = megasas_reset_bus_host,
> + .eh_timed_out = megasas_reset_timer,
> .bios_param = megasas_bios_param,
> .use_clustering = ENABLE_CLUSTERING,
> };
> @@ -1215,9 +1251,8 @@ megasas_complete_cmd(struct megasas_inst
> int exception = 0;
> struct megasas_header *hdr = &cmd->frame->hdr;
>
> - if (cmd->scmd) {
> + if (cmd->scmd)
> cmd->scmd->SCp.ptr = (char *)0;
That's NULL, ordinarily ...
> - }
>
> switch (hdr->cmd) {
>
> @@ -1806,6 +1841,7 @@ static void megasas_complete_cmd_dpc(uns
> u32 context;
> struct megasas_cmd *cmd;
> struct megasas_instance *instance = (struct megasas_instance *)instance_addr;
> + unsigned long flags;
>
> /* If we have already declared adapter dead, donot complete cmds */
> if (instance->hw_crit_error)
> @@ -1828,6 +1864,22 @@ static void megasas_complete_cmd_dpc(uns
> }
>
> *instance->consumer = producer;
> +
> + /*
> + * Check if we can restore can_queue
> + */
> + if (instance->flag & MEGASAS_FW_BUSY
> + && time_after(jiffies, instance->last_time + 5 * HZ)
> + && atomic_read(&instance->fw_outstanding) < 17) {
> +
> + spin_lock_irqsave(&instance->throttle_io_lock, flags);
> +
> + instance->flag &= ~MEGASAS_FW_BUSY;
> + instance->host->can_queue =
> + instance->max_fw_cmds - MEGASAS_INT_CMDS;
> +
> + spin_unlock_irqrestore(&instance->throttle_io_lock, flags);
> + }
> }
>
> /**
> @@ -2384,6 +2436,7 @@ megasas_probe_one(struct pci_dev *pdev,
> init_waitqueue_head(&instance->int_cmd_wait_q);
> init_waitqueue_head(&instance->abort_cmd_wait_q);
>
> + spin_lock_init(&instance->throttle_io_lock);
> spin_lock_init(&instance->cmd_pool_lock);
>
> sema_init(&instance->aen_mutex, 1);
> @@ -2398,6 +2451,8 @@ megasas_probe_one(struct pci_dev *pdev,
> instance->init_id = MEGASAS_DEFAULT_INIT_ID;
>
> megasas_dbg_lvl = 0;
> + instance->flag = 0;
> + instance->last_time = 0;
>
> /*
> * Initialize MFI Firmware
> diff -uprN linux-2.6.orig/drivers/scsi/megaraid/megaraid_sas.h linux-2.6.new/drivers/scsi/megaraid/megaraid_sas.h
> --- linux-2.6.orig/drivers/scsi/megaraid/megaraid_sas.h 2007-03-28 08:41:49.000000000 -0700
> +++ linux-2.6.new/drivers/scsi/megaraid/megaraid_sas.h 2007-03-28 08:36:39.000000000 -0700
> @@ -18,9 +18,9 @@
> /*
> * MegaRAID SAS Driver meta data
> */
> -#define MEGASAS_VERSION "00.00.03.10-rc1"
> -#define MEGASAS_RELDATE "Feb 14, 2007"
> -#define MEGASAS_EXT_VERSION "Wed Feb 14 10:14:25 PST 2007"
> +#define MEGASAS_VERSION "00.00.03.10-rc3"
> +#define MEGASAS_RELDATE "Mar 28, 2007"
> +#define MEGASAS_EXT_VERSION "Wed Mar 28 10:25:52 PST 2007"
>
> /*
> * Device IDs
> @@ -539,6 +539,8 @@ struct megasas_ctrl_info {
>
> #define MEGASAS_DBG_LVL 1
>
> +#define MEGASAS_FW_BUSY 1
> +
> /*
> * When SCSI mid-layer calls driver's reset routine, driver waits for
> * MEGASAS_RESET_WAIT_TIME seconds for all outstanding IO to complete. Note
> @@ -1104,6 +1106,11 @@ struct megasas_instance {
>
> struct megasas_instance_template *instancet;
> struct tasklet_struct isr_tasklet;
> +
> + u8 flag;
> + u8 rsvd[3];
What's this rsvd? I don't see it used anywhere in the code ...
> + unsigned long last_time;
> + spinlock_t throttle_io_lock;
> };
>
> #define MEGASAS_IS_LOGICAL(scp) \
James
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
