eh_timed_out call back (megasas_reset_timer) is used to throttle io to the adapter
when it is called the first time for a scmd.
The MEGASAS_FW_BUSY flag is set and can_queue reduced to 16. The can_queue is restored
from completion routine in following two conditions : 5 seconds has elapsed and the # of
outstanding cmds in FW is < 17.
Signed-off-by: Sumant Patro <sumant.patro@xxxxxxx>
---
drivers/scsi/megaraid/megaraid_sas.c | 65 +++++++++++++++++++++++--
drivers/scsi/megaraid/megaraid_sas.h | 13 +++--
2 files changed, 70 insertions(+), 8 deletions(-)
This patch requires the patch submitted by James with subject line :
[PATCH] expose eh_timed_out to the host template
diff -uprN linux-2.6.orig/drivers/scsi/megaraid/megaraid_sas.c linux-2.6.new/drivers/scsi/megaraid/megaraid_sas.c
--- linux-2.6.orig/drivers/scsi/megaraid/megaraid_sas.c 2007-03-28 08:41:49.000000000 -0700
+++ linux-2.6.new/drivers/scsi/megaraid/megaraid_sas.c 2007-03-28 08:36:38.000000000 -0700
@@ -10,7 +10,7 @@
* 2 of the License, or (at your option) any later version.
*
* FILE : megaraid_sas.c
- * Version : v00.00.03.10-rc1
+ * Version : v00.00.03.10-rc3
*
* Authors:
* (email-id : megaraidlinux@xxxxxxx)
@@ -886,6 +886,7 @@ megasas_queue_command(struct scsi_cmnd *
goto out_return_cmd;
cmd->scmd = scmd;
+ scmd->SCp.ptr = (char *)cmd;
/*
* Issue the command to the FW
@@ -981,8 +982,8 @@ static int megasas_generic_reset(struct
instance = (struct megasas_instance *)scmd->device->host->hostdata;
- scmd_printk(KERN_NOTICE, scmd, "megasas: RESET -%ld cmd=%x\n",
- scmd->serial_number, scmd->cmnd[0]);
+ scmd_printk(KERN_NOTICE, scmd, "megasas: RESET -%ld cmd=%x retries=%x\n",
+ scmd->serial_number, scmd->cmnd[0], scmd->retries);
if (instance->hw_crit_error) {
printk(KERN_ERR "megasas: cannot recover from previous reset "
@@ -1000,6 +1001,40 @@ static int megasas_generic_reset(struct
}
/**
+ * megasas_reset_timer - quiesce the adapter if required
+ * @scmd: scsi cmnd
+ *
+ * Sets the FW busy flag and reduces the host->can_queue if the
+ * cmd has not been completed within the timeout period.
+ */
+static enum
+scsi_eh_timer_return megasas_reset_timer(struct scsi_cmnd *scmd)
+{
+ struct megasas_cmd *cmd = (struct megasas_cmd *)scmd->SCp.ptr;
+ struct megasas_instance *instance;
+ unsigned long flags;
+
+ if (cmd) {
+ if (time_after(jiffies, scmd->jiffies_at_alloc + 170 * HZ))
+ return EH_NOT_HANDLED;
+
+ instance = cmd->instance;
+ if (!(instance->flag & MEGASAS_FW_BUSY)) {
+ /* FW is busy, throttle IO */
+ spin_lock_irqsave(&instance->throttle_io_lock, flags);
+
+ instance->host->can_queue = 16;
+ instance->last_time = jiffies;
+ instance->flag |= MEGASAS_FW_BUSY;
+
+ spin_unlock_irqrestore(&instance->throttle_io_lock, flags);
+ }
+ return EH_RESET_TIMER;
+ }
+ return EH_HANDLED;
+}
+
+/**
* megasas_reset_device - Device reset handler entry point
*/
static int megasas_reset_device(struct scsi_cmnd *scmd)
@@ -1112,6 +1147,7 @@ static struct scsi_host_template megasas
.eh_device_reset_handler = megasas_reset_device,
.eh_bus_reset_handler = megasas_reset_bus_host,
.eh_host_reset_handler = megasas_reset_bus_host,
+ .eh_timed_out = megasas_reset_timer,
.bios_param = megasas_bios_param,
.use_clustering = ENABLE_CLUSTERING,
};
@@ -1215,9 +1251,8 @@ megasas_complete_cmd(struct megasas_inst
int exception = 0;
struct megasas_header *hdr = &cmd->frame->hdr;
- if (cmd->scmd) {
+ if (cmd->scmd)
cmd->scmd->SCp.ptr = (char *)0;
- }
switch (hdr->cmd) {
@@ -1806,6 +1841,7 @@ static void megasas_complete_cmd_dpc(uns
u32 context;
struct megasas_cmd *cmd;
struct megasas_instance *instance = (struct megasas_instance *)instance_addr;
+ unsigned long flags;
/* If we have already declared adapter dead, donot complete cmds */
if (instance->hw_crit_error)
@@ -1828,6 +1864,22 @@ static void megasas_complete_cmd_dpc(uns
}
*instance->consumer = producer;
+
+ /*
+ * Check if we can restore can_queue
+ */
+ if (instance->flag & MEGASAS_FW_BUSY
+ && time_after(jiffies, instance->last_time + 5 * HZ)
+ && atomic_read(&instance->fw_outstanding) < 17) {
+
+ spin_lock_irqsave(&instance->throttle_io_lock, flags);
+
+ instance->flag &= ~MEGASAS_FW_BUSY;
+ instance->host->can_queue =
+ instance->max_fw_cmds - MEGASAS_INT_CMDS;
+
+ spin_unlock_irqrestore(&instance->throttle_io_lock, flags);
+ }
}
/**
@@ -2384,6 +2436,7 @@ megasas_probe_one(struct pci_dev *pdev,
init_waitqueue_head(&instance->int_cmd_wait_q);
init_waitqueue_head(&instance->abort_cmd_wait_q);
+ spin_lock_init(&instance->throttle_io_lock);
spin_lock_init(&instance->cmd_pool_lock);
sema_init(&instance->aen_mutex, 1);
@@ -2398,6 +2451,8 @@ megasas_probe_one(struct pci_dev *pdev,
instance->init_id = MEGASAS_DEFAULT_INIT_ID;
megasas_dbg_lvl = 0;
+ instance->flag = 0;
+ instance->last_time = 0;
/*
* Initialize MFI Firmware
diff -uprN linux-2.6.orig/drivers/scsi/megaraid/megaraid_sas.h linux-2.6.new/drivers/scsi/megaraid/megaraid_sas.h
--- linux-2.6.orig/drivers/scsi/megaraid/megaraid_sas.h 2007-03-28 08:41:49.000000000 -0700
+++ linux-2.6.new/drivers/scsi/megaraid/megaraid_sas.h 2007-03-28 08:36:39.000000000 -0700
@@ -18,9 +18,9 @@
/*
* MegaRAID SAS Driver meta data
*/
-#define MEGASAS_VERSION "00.00.03.10-rc1"
-#define MEGASAS_RELDATE "Feb 14, 2007"
-#define MEGASAS_EXT_VERSION "Wed Feb 14 10:14:25 PST 2007"
+#define MEGASAS_VERSION "00.00.03.10-rc3"
+#define MEGASAS_RELDATE "Mar 28, 2007"
+#define MEGASAS_EXT_VERSION "Wed Mar 28 10:25:52 PST 2007"
/*
* Device IDs
@@ -539,6 +539,8 @@ struct megasas_ctrl_info {
#define MEGASAS_DBG_LVL 1
+#define MEGASAS_FW_BUSY 1
+
/*
* When SCSI mid-layer calls driver's reset routine, driver waits for
* MEGASAS_RESET_WAIT_TIME seconds for all outstanding IO to complete. Note
@@ -1104,6 +1106,11 @@ struct megasas_instance {
struct megasas_instance_template *instancet;
struct tasklet_struct isr_tasklet;
+
+ u8 flag;
+ u8 rsvd[3];
+ unsigned long last_time;
+ spinlock_t throttle_io_lock;
};
#define MEGASAS_IS_LOGICAL(scp) \
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
