This adds the Kconfig and mpi30 headers.
Signed-off-by: Kashyap Desai <kashyap.desai@xxxxxxxxxxxx>
Cc: sathya.prakash@xxxxxxxxxxxx
Cc: bvanassche@xxxxxxx
Cc: thenzl@xxxxxxxxxx
Cc: hare@xxxxxxx
Cc: himanshu.madhani@xxxxxxxxxx
Cc: hch@xxxxxxxxxxxxx
---
drivers/scsi/Kconfig | 1 +
drivers/scsi/Makefile | 1 +
drivers/scsi/mpi3mr/Kconfig | 7 +
drivers/scsi/mpi3mr/mpi/mpi30_api.h | 18 +
drivers/scsi/mpi3mr/mpi/mpi30_image.h | 220 +++++
drivers/scsi/mpi3mr/mpi/mpi30_init.h | 163 ++++
drivers/scsi/mpi3mr/mpi/mpi30_ioc.h | 1009 +++++++++++++++++++++
drivers/scsi/mpi3mr/mpi/mpi30_transport.h | 486 ++++++++++
8 files changed, 1905 insertions(+)
create mode 100644 drivers/scsi/mpi3mr/Kconfig
create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_api.h
create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_image.h
create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_init.h
create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_ioc.h
create mode 100644 drivers/scsi/mpi3mr/mpi/mpi30_transport.h
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 06b87c7f6bab..1f06811740a7 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -482,6 +482,7 @@ config SCSI_ARCMSR
source "drivers/scsi/esas2r/Kconfig"
source "drivers/scsi/megaraid/Kconfig.megaraid"
source "drivers/scsi/mpt3sas/Kconfig"
+source "drivers/scsi/mpi3mr/Kconfig"
source "drivers/scsi/smartpqi/Kconfig"
source "drivers/scsi/ufs/Kconfig"
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index bc3882f5cc69..06f2d5fab899 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -99,6 +99,7 @@ obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o
obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/
obj-$(CONFIG_MEGARAID_SAS) += megaraid/
obj-$(CONFIG_SCSI_MPT3SAS) += mpt3sas/
+obj-$(CONFIG_SCSI_MPI3MR) += mpi3mr/
obj-$(CONFIG_SCSI_UFSHCD) += ufs/
obj-$(CONFIG_SCSI_ACARD) += atp870u.o
obj-$(CONFIG_SCSI_SUNESP) += esp_scsi.o sun_esp.o
diff --git a/drivers/scsi/mpi3mr/Kconfig b/drivers/scsi/mpi3mr/Kconfig
new file mode 100644
index 000000000000..2d0568dd176a
--- /dev/null
+++ b/drivers/scsi/mpi3mr/Kconfig
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+config SCSI_MPI3MR
+ tristate "Broadcom MPI3 Storage Controller Device Driver"
+ depends on PCI && SCSI
+ help
+ This driver supports Broadcom's Unified MPI3 based Storage & RAID Controllers.
diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_api.h b/drivers/scsi/mpi3mr/mpi/mpi30_api.h
new file mode 100644
index 000000000000..48247c254953
--- /dev/null
+++ b/drivers/scsi/mpi3mr/mpi/mpi30_api.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2019-2021 Broadcom Inc. All rights reserved.
+ *
+ * Name: mpi30_api.h
+ * Description: Root header that include all other MPI 3.0 headers
+ * Developers need to only include this header to gain
+ * access to the full MPI3.0 API definitions.
+ * Creation Date: 04/15/2019
+ * Version: 03.00.00
+ */
+#ifndef MPI30_API_H
+#define MPI30_API_H 1
+#include "mpi30_transport.h"
+#include "mpi30_image.h"
+#include "mpi30_init.h"
+#include "mpi30_ioc.h"
+#endif
diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_image.h b/drivers/scsi/mpi3mr/mpi/mpi30_image.h
new file mode 100644
index 000000000000..45e7510698cb
--- /dev/null
+++ b/drivers/scsi/mpi3mr/mpi/mpi30_image.h
@@ -0,0 +1,220 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2018-2021 Broadcom Inc. All rights reserved.
+ *
+ * Name: mpi30_image.h
+ * Description: Contains definitions for firmware and other component images.
+ * Creation Date: 04/02/2018
+ * Version: 03.00.00
+ */
+#ifndef MPI30_IMAGE_H
+#define MPI30_IMAGE_H 1
+struct _mpi3_comp_image_version {
+ __le16 build_num;
+ __le16 customer_id;
+ u8 phase_minor;
+ u8 phase_major;
+ u8 gen_minor;
+ u8 gen_major;
+};
+
+struct _mpi3_hash_exclusion_format {
+ __le32 offset;
+ __le32 size;
+};
+
+#define MPI3_IMAGE_HASH_EXCUSION_NUM (4)
+struct _mpi3_component_image_header {
+ __le32 signature0;
+ __le32 load_address;
+ __le32 data_size;
+ __le32 start_offset;
+ __le32 signature1;
+ __le32 flash_offset;
+ __le32 image_size;
+ __le32 version_string_offset;
+ __le32 build_date_string_offset;
+ __le32 build_time_string_offset;
+ __le32 environment_variable_offset;
+ __le32 application_specific;
+ __le32 signature2;
+ __le32 header_size;
+ __le32 crc;
+ __le32 flags;
+ __le32 secondary_flash_offset;
+ __le32 etp_offset;
+ __le32 etp_size;
+ union _mpi3_version_union rmc_interface_version;
+ union _mpi3_version_union etp_interface_version;
+ struct _mpi3_comp_image_version component_image_version;
+ struct _mpi3_hash_exclusion_format hash_exclusion[MPI3_IMAGE_HASH_EXCUSION_NUM];
+ __le32 next_image_header_offset;
+ union _mpi3_version_union security_version;
+ __le32 reserved84[31];
+};
+
+#define MPI3_IMAGE_HEADER_SIGNATURE0_MPI3 (0xeb00003e)
+#define MPI3_IMAGE_HEADER_LOAD_ADDRESS_INVALID (0x00000000)
+#define MPI3_IMAGE_HEADER_SIGNATURE1_APPLICATION (0x20505041)
+#define MPI3_IMAGE_HEADER_SIGNATURE1_FIRST_MUTABLE (0x20434d46)
+#define MPI3_IMAGE_HEADER_SIGNATURE1_BSP (0x20505342)
+#define MPI3_IMAGE_HEADER_SIGNATURE1_ROM_BIOS (0x534f4942)
+#define MPI3_IMAGE_HEADER_SIGNATURE1_HII_X64 (0x4d494948)
+#define MPI3_IMAGE_HEADER_SIGNATURE1_HII_ARM (0x41494948)
+#define MPI3_IMAGE_HEADER_SIGNATURE1_CPLD (0x444c5043)
+#define MPI3_IMAGE_HEADER_SIGNATURE1_SPD (0x20445053)
+#define MPI3_IMAGE_HEADER_SIGNATURE1_GAS_GAUGE (0x20534147)
+#define MPI3_IMAGE_HEADER_SIGNATURE1_PBLP (0x504c4250)
+#define MPI3_IMAGE_HEADER_SIGNATURE2_VALUE (0x50584546)
+#define MPI3_IMAGE_HEADER_FLAGS_DEVICE_KEY_BASIS_MASK (0x00000030)
+#define MPI3_IMAGE_HEADER_FLAGS_DEVICE_KEY_BASIS_CDI (0x00000000)
+#define MPI3_IMAGE_HEADER_FLAGS_DEVICE_KEY_BASIS_DI (0x00000010)
+#define MPI3_IMAGE_HEADER_FLAGS_SIGNED_NVDATA (0x00000008)
+#define MPI3_IMAGE_HEADER_FLAGS_REQUIRES_ACTIVATION (0x00000004)
+#define MPI3_IMAGE_HEADER_FLAGS_COMPRESSED (0x00000002)
+#define MPI3_IMAGE_HEADER_FLAGS_FLASH (0x00000001)
+#define MPI3_IMAGE_HEADER_SIGNATURE0_OFFSET (0x00)
+#define MPI3_IMAGE_HEADER_LOAD_ADDRESS_OFFSET (0x04)
+#define MPI3_IMAGE_HEADER_DATA_SIZE_OFFSET (0x08)
+#define MPI3_IMAGE_HEADER_START_OFFSET_OFFSET (0x0c)
+#define MPI3_IMAGE_HEADER_SIGNATURE1_OFFSET (0x10)
+#define MPI3_IMAGE_HEADER_FLASH_OFFSET_OFFSET (0x14)
+#define MPI3_IMAGE_HEADER_FLASH_SIZE_OFFSET (0x18)
+#define MPI3_IMAGE_HEADER_VERSION_STRING_OFFSET_OFFSET (0x1c)
+#define MPI3_IMAGE_HEADER_BUILD_DATE_STRING_OFFSET_OFFSET (0x20)
+#define MPI3_IMAGE_HEADER_BUILD_TIME_OFFSET_OFFSET (0x24)
+#define MPI3_IMAGE_HEADER_ENVIROMENT_VAR_OFFSET_OFFSET (0x28)
+#define MPI3_IMAGE_HEADER_APPLICATION_SPECIFIC_OFFSET (0x2c)
+#define MPI3_IMAGE_HEADER_SIGNATURE2_OFFSET (0x30)
+#define MPI3_IMAGE_HEADER_HEADER_SIZE_OFFSET (0x34)
+#define MPI3_IMAGE_HEADER_CRC_OFFSET (0x38)
+#define MPI3_IMAGE_HEADER_FLAGS_OFFSET (0x3c)
+#define MPI3_IMAGE_HEADER_SECONDARY_FLASH_OFFSET_OFFSET (0x40)
+#define MPI3_IMAGE_HEADER_ETP_OFFSET_OFFSET (0x44)
+#define MPI3_IMAGE_HEADER_ETP_SIZE_OFFSET (0x48)
+#define MPI3_IMAGE_HEADER_RMC_INTERFACE_VER_OFFSET (0x4c)
+#define MPI3_IMAGE_HEADER_ETP_INTERFACE_VER_OFFSET (0x50)
+#define MPI3_IMAGE_HEADER_COMPONENT_IMAGE_VER_OFFSET (0x54)
+#define MPI3_IMAGE_HEADER_HASH_EXCLUSION_OFFSET (0x5c)
+#define MPI3_IMAGE_HEADER_NEXT_IMAGE_HEADER_OFFSET_OFFSET (0x7c)
+#define MPI3_IMAGE_HEADER_SIZE (0x100)
+struct _mpi3_extended_image_header {
+ u8 image_type;
+ u8 reserved01[3];
+ __le32 checksum;
+ __le32 image_size;
+ __le32 next_image_header_offset;
+ __le32 reserved10[4];
+ __le32 identify_string[8];
+};
+
+#define MPI3_EXT_IMAGE_IMAGETYPE_OFFSET (0x00)
+#define MPI3_EXT_IMAGE_IMAGESIZE_OFFSET (0x08)
+#define MPI3_EXT_IMAGE_NEXTIMAGE_OFFSET (0x0c)
+#define MPI3_EXT_IMAGE_HEADER_SIZE (0x40)
+#define MPI3_EXT_IMAGE_TYPE_UNSPECIFIED (0x00)
+#define MPI3_EXT_IMAGE_TYPE_NVDATA (0x03)
+#define MPI3_EXT_IMAGE_TYPE_SUPPORTED_DEVICES (0x07)
+#define MPI3_EXT_IMAGE_TYPE_ENCRYPTED_HASH (0x09)
+#define MPI3_EXT_IMAGE_TYPE_RDE (0x0a)
+#define MPI3_EXT_IMAGE_TYPE_AUXILIARY_PROCESSOR (0x0b)
+#define MPI3_EXT_IMAGE_TYPE_MIN_PRODUCT_SPECIFIC (0x80)
+#define MPI3_EXT_IMAGE_TYPE_MAX_PRODUCT_SPECIFIC (0xff)
+struct _mpi3_supported_device {
+ __le16 device_id;
+ __le16 vendor_id;
+ __le16 device_id_mask;
+ __le16 reserved06;
+ u8 low_pci_rev;
+ u8 high_pci_rev;
+ __le16 reserved0a;
+ __le32 reserved0c;
+};
+
+#ifndef MPI3_SUPPORTED_DEVICE_MAX
+#define MPI3_SUPPORTED_DEVICE_MAX (1)
+#endif
+struct _mpi3_supported_devices_data {
+ u8 image_version;
+ u8 reserved01;
+ u8 num_devices;
+ u8 reserved03;
+ __le32 reserved04;
+ struct _mpi3_supported_device supported_device[MPI3_SUPPORTED_DEVICE_MAX];
+};
+
+#ifndef MPI3_ENCRYPTED_HASH_MAX
+#define MPI3_ENCRYPTED_HASH_MAX (1)
+#endif
+struct _mpi3_encrypted_hash_entry {
+ u8 hash_image_type;
+ u8 hash_algorithm;
+ u8 encryption_algorithm;
+ u8 reserved03;
+ __le32 reserved04;
+ __le32 encrypted_hash[MPI3_ENCRYPTED_HASH_MAX];
+};
+
+#define MPI3_HASH_IMAGE_TYPE_KEY_WITH_SIGNATURE (0x03)
+#define MPI3_HASH_ALGORITHM_VERSION_MASK (0xe0)
+#define MPI3_HASH_ALGORITHM_VERSION_NONE (0x00)
+#define MPI3_HASH_ALGORITHM_VERSION_SHA1 (0x20)
+#define MPI3_HASH_ALGORITHM_VERSION_SHA2 (0x40)
+#define MPI3_HASH_ALGORITHM_VERSION_SHA3 (0x60)
+#define MPI3_HASH_ALGORITHM_SIZE_MASK (0x1f)
+#define MPI3_HASH_ALGORITHM_SIZE_UNUSED (0x00)
+#define MPI3_HASH_ALGORITHM_SIZE_SHA256 (0x01)
+#define MPI3_HASH_ALGORITHM_SIZE_SHA512 (0x02)
+#define MPI3_ENCRYPTION_ALGORITHM_UNUSED (0x00)
+#define MPI3_ENCRYPTION_ALGORITHM_RSA256 (0x01)
+#define MPI3_ENCRYPTION_ALGORITHM_RSA512 (0x02)
+#define MPI3_ENCRYPTION_ALGORITHM_RSA1024 (0x03)
+#define MPI3_ENCRYPTION_ALGORITHM_RSA2048 (0x04)
+#define MPI3_ENCRYPTION_ALGORITHM_RSA4096 (0x05)
+#define MPI3_ENCRYPTION_ALGORITHM_RSA3072 (0x06)
+#ifndef MPI3_PUBLIC_KEY_MAX
+#define MPI3_PUBLIC_KEY_MAX (1)
+#endif
+struct _mpi3_encrypted_key_with_hash_entry {
+ u8 hash_image_type;
+ u8 hash_algorithm;
+ u8 encryption_algorithm;
+ u8 reserved03;
+ __le32 reserved04;
+ __le32 public_key[MPI3_PUBLIC_KEY_MAX];
+ __le32 encrypted_hash[MPI3_ENCRYPTED_HASH_MAX];
+};
+
+#ifndef MPI3_ENCRYPTED_HASH_ENTRY_MAX
+#define MPI3_ENCRYPTED_HASH_ENTRY_MAX (1)
+#endif
+struct _mpi3_encrypted_hash_data {
+ u8 image_version;
+ u8 num_hash;
+ __le16 reserved02;
+ __le32 reserved04;
+ struct _mpi3_encrypted_hash_entry encrypted_hash_entry[MPI3_ENCRYPTED_HASH_ENTRY_MAX];
+};
+
+#ifndef MPI3_AUX_PROC_DATA_MAX
+#define MPI3_AUX_PROC_DATA_MAX (1)
+#endif
+struct _mpi3_aux_processor_data {
+ u8 boot_method;
+ u8 num_load_addr;
+ u8 reserved02;
+ u8 type;
+ __le32 version;
+ __le32 load_address[8];
+ __le32 reserved28[22];
+ __le32 aux_processor_data[MPI3_AUX_PROC_DATA_MAX];
+};
+
+#define MPI3_AUX_PROC_DATA_OFFSET (0x80)
+#define MPI3_AUXPROCESSOR_BOOT_METHOD_MO_MSG (0x00)
+#define MPI3_AUXPROCESSOR_BOOT_METHOD_MO_DOORBELL (0x01)
+#define MPI3_AUXPROCESSOR_BOOT_METHOD_COMPONENT (0x02)
+#define MPI3_AUXPROCESSOR_TYPE_ARM_A15 (0x00)
+#define MPI3_AUXPROCESSOR_TYPE_ARM_M0 (0x01)
+#define MPI3_AUXPROCESSOR_TYPE_ARM_R4 (0x02)
+#endif
diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_init.h b/drivers/scsi/mpi3mr/mpi/mpi30_init.h
new file mode 100644
index 000000000000..dfd968681889
--- /dev/null
+++ b/drivers/scsi/mpi3mr/mpi/mpi30_init.h
@@ -0,0 +1,163 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2016-2021 Broadcom Inc. All rights reserved.
+ *
+ * Name: mpi30_init.h
+ * Description: Contains definitions for SCSI initiator mode messages and structures.
+ * Creation Date: 10/27/2016
+ * Version: 03.00.00
+ */
+#ifndef MPI30_INIT_H
+#define MPI30_INIT_H 1
+struct _mpi3_scsi_io_cdb_eedp32 {
+ u8 cdb[20];
+ __be32 primary_reference_tag;
+ __le16 primary_application_tag;
+ __le16 primary_application_tag_mask;
+ __le32 transfer_length;
+};
+
+union _mpi3_scso_io_cdb_union {
+ u8 cdb32[32];
+ struct _mpi3_scsi_io_cdb_eedp32 eedp32;
+ struct _mpi3_sge_common sge;
+};
+
+struct _mpi3_scsi_io_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ __le16 dev_handle;
+ __le32 flags;
+ __le32 skip_count;
+ __le32 data_length;
+ u8 lun[8];
+ union _mpi3_scso_io_cdb_union cdb;
+ union _mpi3_sge_union sgl[4];
+};
+
+#define MPI3_SCSIIO_MSGFLAGS_METASGL_VALID (0x80)
+#define MPI3_SCSIIO_FLAGS_LARGE_CDB (0x60000000)
+#define MPI3_SCSIIO_FLAGS_CDB_16_OR_LESS (0x00000000)
+#define MPI3_SCSIIO_FLAGS_CDB_GREATER_THAN_16 (0x20000000)
+#define MPI3_SCSIIO_FLAGS_CDB_IN_SEPARATE_BUFFER (0x40000000)
+#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_MASK (0x07000000)
+#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_SIMPLEQ (0x00000000)
+#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_HEADOFQ (0x01000000)
+#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_ORDEREDQ (0x02000000)
+#define MPI3_SCSIIO_FLAGS_TASKATTRIBUTE_ACAQ (0x04000000)
+#define MPI3_SCSIIO_FLAGS_CMDPRI_MASK (0x00f00000)
+#define MPI3_SCSIIO_FLAGS_CMDPRI_SHIFT (20)
+#define MPI3_SCSIIO_FLAGS_DATADIRECTION_MASK (0x000c0000)
+#define MPI3_SCSIIO_FLAGS_DATADIRECTION_NO_DATA_TRANSFER (0x00000000)
+#define MPI3_SCSIIO_FLAGS_DATADIRECTION_WRITE (0x00040000)
+#define MPI3_SCSIIO_FLAGS_DATADIRECTION_READ (0x00080000)
+#define MPI3_SCSIIO_FLAGS_DMAOPERATION_MASK (0x00030000)
+#define MPI3_SCSIIO_FLAGS_DMAOPERATION_HOST_PI (0x00010000)
+#define MPI3_SCSIIO_METASGL_INDEX (3)
+struct _mpi3_scsi_io_reply {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 ioc_use_only08;
+ __le16 ioc_status;
+ __le32 ioc_log_info;
+ u8 scsi_status;
+ u8 scsi_state;
+ __le16 dev_handle;
+ __le32 transfer_count;
+ __le32 sense_count;
+ __le32 response_data;
+ __le16 task_tag;
+ __le16 scsi_status_qualifier;
+ __le32 eedp_error_offset;
+ __le16 eedp_observed_app_tag;
+ __le16 eedp_observed_guard;
+ __le32 eedp_observed_ref_tag;
+ __le64 sense_data_buffer_address;
+};
+
+#define MPI3_SCSIIO_REPLY_MSGFLAGS_REFTAG_OBSERVED_VALID (0x01)
+#define MPI3_SCSIIO_REPLY_MSGFLAGS_APPTAG_OBSERVED_VALID (0x02)
+#define MPI3_SCSIIO_REPLY_MSGFLAGS_GUARD_OBSERVED_VALID (0x04)
+#define MPI3_SCSI_STATUS_GOOD (0x00)
+#define MPI3_SCSI_STATUS_CHECK_CONDITION (0x02)
+#define MPI3_SCSI_STATUS_CONDITION_MET (0x04)
+#define MPI3_SCSI_STATUS_BUSY (0x08)
+#define MPI3_SCSI_STATUS_INTERMEDIATE (0x10)
+#define MPI3_SCSI_STATUS_INTERMEDIATE_CONDMET (0x14)
+#define MPI3_SCSI_STATUS_RESERVATION_CONFLICT (0x18)
+#define MPI3_SCSI_STATUS_COMMAND_TERMINATED (0x22)
+#define MPI3_SCSI_STATUS_TASK_SET_FULL (0x28)
+#define MPI3_SCSI_STATUS_ACA_ACTIVE (0x30)
+#define MPI3_SCSI_STATUS_TASK_ABORTED (0x40)
+#define MPI3_SCSI_STATE_SENSE_MASK (0x03)
+#define MPI3_SCSI_STATE_SENSE_VALID (0x00)
+#define MPI3_SCSI_STATE_SENSE_FAILED (0x01)
+#define MPI3_SCSI_STATE_SENSE_BUFF_Q_EMPTY (0x02)
+#define MPI3_SCSI_STATE_SENSE_NOT_AVAILABLE (0x03)
+#define MPI3_SCSI_STATE_NO_SCSI_STATUS (0x04)
+#define MPI3_SCSI_STATE_TERMINATED (0x08)
+#define MPI3_SCSI_STATE_RESPONSE_DATA_VALID (0x10)
+#define MPI3_SCSI_RSP_RESPONSECODE_MASK (0x000000ff)
+#define MPI3_SCSI_RSP_RESPONSECODE_SHIFT (0)
+#define MPI3_SCSI_RSP_ARI2_MASK (0x0000ff00)
+#define MPI3_SCSI_RSP_ARI2_SHIFT (8)
+#define MPI3_SCSI_RSP_ARI1_MASK (0x00ff0000)
+#define MPI3_SCSI_RSP_ARI1_SHIFT (16)
+#define MPI3_SCSI_RSP_ARI0_MASK (0xff000000)
+#define MPI3_SCSI_RSP_ARI0_SHIFT (24)
+#define MPI3_SCSI_TASKTAG_UNKNOWN (0xffff)
+struct _mpi3_scsi_task_mgmt_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ __le16 dev_handle;
+ __le16 task_host_tag;
+ u8 task_type;
+ u8 reserved0f;
+ __le16 task_request_queue_id;
+ __le16 reserved12;
+ __le32 reserved14;
+ u8 lun[8];
+};
+
+#define MPI3_SCSITASKMGMT_MSGFLAGS_DO_NOT_SEND_TASK_IU (0x08)
+#define MPI3_SCSITASKMGMT_TASKTYPE_ABORT_TASK (0x01)
+#define MPI3_SCSITASKMGMT_TASKTYPE_ABORT_TASK_SET (0x02)
+#define MPI3_SCSITASKMGMT_TASKTYPE_TARGET_RESET (0x03)
+#define MPI3_SCSITASKMGMT_TASKTYPE_LOGICAL_UNIT_RESET (0x05)
+#define MPI3_SCSITASKMGMT_TASKTYPE_CLEAR_TASK_SET (0x06)
+#define MPI3_SCSITASKMGMT_TASKTYPE_QUERY_TASK (0x07)
+#define MPI3_SCSITASKMGMT_TASKTYPE_CLEAR_ACA (0x08)
+#define MPI3_SCSITASKMGMT_TASKTYPE_QUERY_TASK_SET (0x09)
+#define MPI3_SCSITASKMGMT_TASKTYPE_QUERY_ASYNC_EVENT (0x0a)
+#define MPI3_SCSITASKMGMT_TASKTYPE_I_T_NEXUS_RESET (0x0b)
+struct _mpi3_scsi_task_mgmt_reply {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 ioc_use_only08;
+ __le16 ioc_status;
+ __le32 ioc_log_info;
+ __le32 termination_count;
+ __le32 response_data;
+ __le32 reserved18;
+};
+
+#define MPI3_SCSITASKMGMT_RSPCODE_IO_QUEUED_ON_IOC (0x80)
+#endif
diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h b/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h
new file mode 100644
index 000000000000..2c62075cbbe1
--- /dev/null
+++ b/drivers/scsi/mpi3mr/mpi/mpi30_ioc.h
@@ -0,0 +1,1009 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2016-2021 Broadcom Inc. All rights reserved.
+ *
+ * Name: mpi30_ioc.h
+ * Description: Contains definitions for IOC messages such as IOC Init, IOC Facts, Port Enable,
+ * Events, FW Download, and FW Upload.
+ * Creation Date: 10/24/2016
+ * Version: 03.00.00
+ */
+#ifndef MPI30_IOC_H
+#define MPI30_IOC_H 1
+struct _mpi3_ioc_init_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ __le16 reserved0a;
+ union _mpi3_version_union mpi_version;
+ __le64 time_stamp;
+ u8 reserved18;
+ u8 who_init;
+ __le16 reserved1a;
+ __le16 reply_free_queue_depth;
+ __le16 reserved1e;
+ __le64 reply_free_queue_address;
+ __le32 reserved28;
+ __le16 sense_buffer_free_queue_depth;
+ __le16 sense_buffer_length;
+ __le64 sense_buffer_free_queue_address;
+ __le64 driver_information_address;
+};
+
+#define MPI3_WHOINIT_NOT_INITIALIZED (0x00)
+#define MPI3_WHOINIT_ROM_BIOS (0x02)
+#define MPI3_WHOINIT_HOST_DRIVER (0x03)
+#define MPI3_WHOINIT_MANUFACTURER (0x04)
+struct _mpi3_driver_info_layout {
+ __le32 information_length;
+ u8 driver_signature[12];
+ u8 os_name[16];
+ u8 os_version[12];
+ u8 driver_name[20];
+ u8 driver_version[32];
+ u8 driver_release_date[20];
+ __le32 driver_capabilities;
+};
+
+struct _mpi3_ioc_facts_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ __le16 reserved0a;
+ __le32 reserved0c;
+ union _mpi3_sge_union sgl;
+};
+
+struct _mpi3_ioc_facts_data {
+ __le16 ioc_facts_data_length;
+ __le16 reserved02;
+ union _mpi3_version_union mpi_version;
+ struct _mpi3_comp_image_version fw_version;
+ __le32 ioc_capabilities;
+ u8 ioc_number;
+ u8 who_init;
+ __le16 max_msix_vectors;
+ __le16 max_outstanding_request;
+ __le16 product_id;
+ __le16 ioc_request_frame_size;
+ __le16 reply_frame_size;
+ __le16 ioc_exceptions;
+ __le16 max_persistent_id;
+ u8 sge_modifier_mask;
+ u8 sge_modifier_value;
+ u8 sge_modifier_shift;
+ u8 protocol_flags;
+ __le16 max_sas_initiators;
+ __le16 max_sas_targets;
+ __le16 max_sas_expanders;
+ __le16 max_enclosures;
+ __le16 min_dev_handle;
+ __le16 max_dev_handle;
+ __le16 max_pc_ie_switches;
+ __le16 max_nvme;
+ __le16 max_pds;
+ __le16 max_vds;
+ __le16 max_host_pds;
+ __le16 max_advanced_host_pds;
+ __le16 max_raid_pds;
+ __le16 max_posted_cmd_buffers;
+ __le32 flags;
+ __le16 max_operational_request_queues;
+ __le16 max_operational_reply_queues;
+ __le16 shutdown_timeout;
+ __le16 reserved4e;
+ __le32 diag_trace_size;
+ __le32 diag_fw_size;
+};
+
+#define MPI3_IOCFACTS_CAPABILITY_ADVANCED_HOST_PD (0x00000010)
+#define MPI3_IOCFACTS_CAPABILITY_RAID_CAPABLE (0x00000008)
+#define MPI3_IOCFACTS_CAPABILITY_COALESCE_CTRL_GRAN_MASK (0x00000001)
+#define MPI3_IOCFACTS_CAPABILITY_COALESCE_CTRL_IOC_GRAN (0x00000000)
+#define MPI3_IOCFACTS_CAPABILITY_COALESCE_CTRL_REPLY_Q_GRAN (0x00000001)
+#define MPI3_IOCFACTS_PID_TYPE_MASK (0xf000)
+#define MPI3_IOCFACTS_PID_TYPE_SHIFT (12)
+#define MPI3_IOCFACTS_PID_PRODUCT_MASK (0x0f00)
+#define MPI3_IOCFACTS_PID_PRODUCT_SHIFT (8)
+#define MPI3_IOCFACTS_PID_FAMILY_MASK (0x00ff)
+#define MPI3_IOCFACTS_PID_FAMILY_SHIFT (0)
+#define MPI3_IOCFACTS_EXCEPT_SAFE_MODE (0x0800)
+#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_MASK (0x0700)
+#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_NONE (0x0000)
+#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_LOCAL_VIA_RAID (0x0100)
+#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_LOCAL_VIA_OOB (0x0200)
+#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_EXT_VIA_RAID (0x0300)
+#define MPI3_IOCFACTS_EXCEPT_SECURITY_KEY_EXT_VIA_OOB (0x0400)
+#define MPI3_IOCFACTS_EXCEPT_PCIE_DISABLED (0x0080)
+#define MPI3_IOCFACTS_EXCEPT_PARTIAL_MEMORY_FAILURE (0x0040)
+#define MPI3_IOCFACTS_EXCEPT_MANUFACT_CHECKSUM_FAIL (0x0020)
+#define MPI3_IOCFACTS_EXCEPT_FW_CHECKSUM_FAIL (0x0010)
+#define MPI3_IOCFACTS_EXCEPT_CONFIG_CHECKSUM_FAIL (0x0008)
+#define MPI3_IOCFACTS_EXCEPT_BOOTSTAT_MASK (0x0001)
+#define MPI3_IOCFACTS_EXCEPT_BOOTSTAT_PRIMARY (0x0000)
+#define MPI3_IOCFACTS_EXCEPT_BOOTSTAT_SECONDARY (0x0001)
+#define MPI3_IOCFACTS_PROTOCOL_SAS (0x0010)
+#define MPI3_IOCFACTS_PROTOCOL_SATA (0x0008)
+#define MPI3_IOCFACTS_PROTOCOL_NVME (0x0004)
+#define MPI3_IOCFACTS_PROTOCOL_SCSI_INITIATOR (0x0002)
+#define MPI3_IOCFACTS_PROTOCOL_SCSI_TARGET (0x0001)
+#define MPI3_IOCFACTS_FLAGS_SIGNED_NVDATA_REQUIRED (0x00010000)
+#define MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_MASK (0x0000ff00)
+#define MPI3_IOCFACTS_FLAGS_DMA_ADDRESS_WIDTH_SHIFT (8)
+#define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_MASK (0x00000030)
+#define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_NOT_STARTED (0x00000000)
+#define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_IN_PROGRESS (0x00000010)
+#define MPI3_IOCFACTS_FLAGS_INITIAL_PORT_ENABLE_COMPLETE (0x00000020)
+#define MPI3_IOCFACTS_FLAGS_PERSONALITY_MASK (0x0000000f)
+#define MPI3_IOCFACTS_FLAGS_PERSONALITY_EHBA (0x00000000)
+#define MPI3_IOCFACTS_FLAGS_PERSONALITY_RAID_DDR (0x00000002)
+struct _mpi3_mgmt_passthrough_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ __le16 reserved0a;
+ __le32 reserved0c[5];
+ union _mpi3_sge_union command_sgl;
+ union _mpi3_sge_union response_sgl;
+};
+
+struct _mpi3_create_request_queue_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ u8 flags;
+ u8 burst;
+ __le16 size;
+ __le16 queue_id;
+ __le16 reply_queue_id;
+ __le16 reserved12;
+ __le32 reserved14;
+ __le64 base_address;
+};
+
+#define MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_MASK (0x80)
+#define MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_SEGMENTED (0x80)
+#define MPI3_CREATE_REQUEST_QUEUE_FLAGS_SEGMENTED_CONTIGUOUS (0x00)
+struct _mpi3_delete_request_queue_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ __le16 queue_id;
+};
+
+struct _mpi3_create_reply_queue_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ u8 flags;
+ u8 reserved0b;
+ __le16 size;
+ __le16 queue_id;
+ __le16 msix_index;
+ __le16 reserved12;
+ __le32 reserved14;
+ __le64 base_address;
+};
+
+#define MPI3_CREATE_REPLY_QUEUE_FLAGS_SEGMENTED_MASK (0x80)
+#define MPI3_CREATE_REPLY_QUEUE_FLAGS_SEGMENTED_SEGMENTED (0x80)
+#define MPI3_CREATE_REPLY_QUEUE_FLAGS_SEGMENTED_CONTIGUOUS (0x00)
+#define MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_MASK (0x01)
+#define MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_DISABLE (0x00)
+#define MPI3_CREATE_REPLY_QUEUE_FLAGS_INT_ENABLE_ENABLE (0x01)
+struct _mpi3_delete_reply_queue_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ __le16 queue_id;
+};
+
+struct _mpi3_port_enable_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ __le16 reserved0a;
+};
+
+#define MPI3_EVENT_LOG_DATA (0x01)
+#define MPI3_EVENT_CHANGE (0x02)
+#define MPI3_EVENT_GPIO_INTERRUPT (0x04)
+#define MPI3_EVENT_TEMP_THRESHOLD (0x05)
+#define MPI3_EVENT_CABLE_MGMT (0x06)
+#define MPI3_EVENT_DEVICE_ADDED (0x07)
+#define MPI3_EVENT_DEVICE_INFO_CHANGED (0x08)
+#define MPI3_EVENT_PREPARE_FOR_RESET (0x09)
+#define MPI3_EVENT_COMP_IMAGE_ACT_START (0x0a)
+#define MPI3_EVENT_ENCL_DEVICE_ADDED (0x0b)
+#define MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE (0x0c)
+#define MPI3_EVENT_DEVICE_STATUS_CHANGE (0x0d)
+#define MPI3_EVENT_ENERGY_PACK_CHANGE (0x0e)
+#define MPI3_EVENT_SAS_DISCOVERY (0x11)
+#define MPI3_EVENT_SAS_BROADCAST_PRIMITIVE (0x12)
+#define MPI3_EVENT_SAS_NOTIFY_PRIMITIVE (0x13)
+#define MPI3_EVENT_SAS_INIT_DEVICE_STATUS_CHANGE (0x14)
+#define MPI3_EVENT_SAS_INIT_TABLE_OVERFLOW (0x15)
+#define MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST (0x16)
+#define MPI3_EVENT_SAS_PHY_COUNTER (0x18)
+#define MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR (0x19)
+#define MPI3_EVENT_PCIE_TOPOLOGY_CHANGE_LIST (0x20)
+#define MPI3_EVENT_PCIE_ENUMERATION (0x22)
+#define MPI3_EVENT_HARD_RESET_RECEIVED (0x40)
+#define MPI3_EVENT_MIN_PRODUCT_SPECIFIC (0x60)
+#define MPI3_EVENT_MAX_PRODUCT_SPECIFIC (0x7f)
+#define MPI3_EVENT_NOTIFY_EVENTMASK_WORDS (4)
+struct _mpi3_event_notification_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ __le16 reserved0a;
+ __le16 sas_broadcast_primitive_masks;
+ __le16 sas_notify_primitive_masks;
+ __le32 event_masks[MPI3_EVENT_NOTIFY_EVENTMASK_WORDS];
+};
+
+struct _mpi3_event_notification_reply {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 ioc_use_only08;
+ __le16 ioc_status;
+ __le32 ioc_log_info;
+ u8 event_data_length;
+ u8 event;
+ __le16 ioc_change_count;
+ __le32 event_context;
+ __le32 event_data[1];
+};
+
+#define MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_MASK (0x01)
+#define MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_REQUIRED (0x01)
+#define MPI3_EVENT_NOTIFY_MSGFLAGS_ACK_NOT_REQUIRED (0x00)
+#define MPI3_EVENT_NOTIFY_MSGFLAGS_EVENT_ORIGINALITY_MASK (0x02)
+#define MPI3_EVENT_NOTIFY_MSGFLAGS_EVENT_ORIGINALITY_ORIGINAL (0x00)
+#define MPI3_EVENT_NOTIFY_MSGFLAGS_EVENT_ORIGINALITY_REPLAY (0x02)
+struct _mpi3_event_data_gpio_interrupt {
+ u8 gpio_num;
+ u8 reserved01[3];
+};
+
+struct _mpi3_event_data_temp_threshold {
+ __le16 status;
+ u8 sensor_num;
+ u8 reserved03;
+ __le16 current_temperature;
+ __le16 reserved06;
+ __le32 reserved08;
+ __le32 reserved0c;
+};
+
+#define MPI3_EVENT_TEMP_THRESHOLD_STATUS_THRESHOLD3_EXCEEDED (0x0008)
+#define MPI3_EVENT_TEMP_THRESHOLD_STATUS_THRESHOLD2_EXCEEDED (0x0004)
+#define MPI3_EVENT_TEMP_THRESHOLD_STATUS_THRESHOLD1_EXCEEDED (0x0002)
+#define MPI3_EVENT_TEMP_THRESHOLD_STATUS_THRESHOLD0_EXCEEDED (0x0001)
+struct _mpi3_event_data_cable_management {
+ __le32 active_cable_power_requirement;
+ u8 status;
+ u8 receptacle_id;
+ __le16 reserved06;
+};
+
+#define MPI3_EVENT_CABLE_MGMT_ACT_CABLE_PWR_INVALID (0xffffffff)
+#define MPI3_EVENT_CABLE_MGMT_STATUS_INSUFFICIENT_POWER (0x00)
+#define MPI3_EVENT_CABLE_MGMT_STATUS_PRESENT (0x01)
+#define MPI3_EVENT_CABLE_MGMT_STATUS_DEGRADED (0x02)
+struct _mpi3_event_ack_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ __le16 reserved0a;
+ u8 event;
+ u8 reserved0d[3];
+ __le32 event_context;
+};
+
+struct _mpi3_event_data_prepare_for_reset {
+ u8 reason_code;
+ u8 reserved01;
+ __le16 reserved02;
+};
+
+#define MPI3_EVENT_PREPARE_RESET_RC_START (0x01)
+#define MPI3_EVENT_PREPARE_RESET_RC_ABORT (0x02)
+struct _mpi3_event_data_comp_image_activation {
+ __le32 reserved00;
+};
+
+struct _mpi3_event_data_device_status_change {
+ __le16 task_tag;
+ u8 reason_code;
+ u8 io_unit_port;
+ __le16 parent_dev_handle;
+ __le16 dev_handle;
+ __le64 wwid;
+ u8 lun[8];
+};
+
+#define MPI3_EVENT_DEV_STAT_RC_MOVED (0x01)
+#define MPI3_EVENT_DEV_STAT_RC_HIDDEN (0x02)
+#define MPI3_EVENT_DEV_STAT_RC_NOT_HIDDEN (0x03)
+#define MPI3_EVENT_DEV_STAT_RC_ASYNC_NOTIFICATION (0x04)
+#define MPI3_EVENT_DEV_STAT_RC_INT_DEVICE_RESET_STRT (0x20)
+#define MPI3_EVENT_DEV_STAT_RC_INT_DEVICE_RESET_CMP (0x21)
+#define MPI3_EVENT_DEV_STAT_RC_INT_TASK_ABORT_STRT (0x22)
+#define MPI3_EVENT_DEV_STAT_RC_INT_TASK_ABORT_CMP (0x23)
+#define MPI3_EVENT_DEV_STAT_RC_INT_IT_NEXUS_RESET_STRT (0x24)
+#define MPI3_EVENT_DEV_STAT_RC_INT_IT_NEXUS_RESET_CMP (0x25)
+#define MPI3_EVENT_DEV_STAT_RC_PCIE_HOT_RESET_FAILED (0x30)
+#define MPI3_EVENT_DEV_STAT_RC_EXPANDER_REDUCED_FUNC_STRT (0x40)
+#define MPI3_EVENT_DEV_STAT_RC_EXPANDER_REDUCED_FUNC_CMP (0x41)
+#define MPI3_EVENT_DEV_STAT_RC_VD_NOT_RESPONDING (0x50)
+struct _mpi3_event_data_energy_pack_change {
+ __le32 reserved00;
+ __le16 shutdown_timeout;
+ __le16 reserved06;
+};
+
+struct _mpi3_event_data_sas_discovery {
+ u8 flags;
+ u8 reason_code;
+ u8 io_unit_port;
+ u8 reserved03;
+ __le32 discovery_status;
+};
+
+#define MPI3_EVENT_SAS_DISC_FLAGS_DEVICE_CHANGE (0x02)
+#define MPI3_EVENT_SAS_DISC_FLAGS_IN_PROGRESS (0x01)
+#define MPI3_EVENT_SAS_DISC_RC_STARTED (0x01)
+#define MPI3_EVENT_SAS_DISC_RC_COMPLETED (0x02)
+#define MPI3_SAS_DISC_STATUS_MAX_ENCLOSURES_EXCEED (0x80000000)
+#define MPI3_SAS_DISC_STATUS_MAX_EXPANDERS_EXCEED (0x40000000)
+#define MPI3_SAS_DISC_STATUS_MAX_DEVICES_EXCEED (0x20000000)
+#define MPI3_SAS_DISC_STATUS_MAX_TOPO_PHYS_EXCEED (0x10000000)
+#define MPI3_SAS_DISC_STATUS_MULTIPLE_DEVICES_IN_SLOT (0x00004000)
+#define MPI3_SAS_DISC_STATUS_SLOT_COUNT_MISMATCH (0x00002000)
+#define MPI3_SAS_DISC_STATUS_TOO_MANY_SLOTS (0x00001000)
+#define MPI3_SAS_DISC_STATUS_EXP_MULTI_SUBTRACTIVE (0x00000800)
+#define MPI3_SAS_DISC_STATUS_MULTI_PORT_DOMAIN (0x00000400)
+#define MPI3_SAS_DISC_STATUS_TABLE_TO_SUBTRACTIVE_LINK (0x00000200)
+#define MPI3_SAS_DISC_STATUS_UNSUPPORTED_DEVICE (0x00000100)
+#define MPI3_SAS_DISC_STATUS_TABLE_LINK (0x00000080)
+#define MPI3_SAS_DISC_STATUS_SUBTRACTIVE_LINK (0x00000040)
+#define MPI3_SAS_DISC_STATUS_SMP_CRC_ERROR (0x00000020)
+#define MPI3_SAS_DISC_STATUS_SMP_FUNCTION_FAILED (0x00000010)
+#define MPI3_SAS_DISC_STATUS_SMP_TIMEOUT (0x00000008)
+#define MPI3_SAS_DISC_STATUS_MULTIPLE_PORTS (0x00000004)
+#define MPI3_SAS_DISC_STATUS_INVALID_SAS_ADDRESS (0x00000002)
+#define MPI3_SAS_DISC_STATUS_LOOP_DETECTED (0x00000001)
+struct _mpi3_event_data_sas_broadcast_primitive {
+ u8 phy_num;
+ u8 io_unit_port;
+ u8 port_width;
+ u8 primitive;
+};
+
+#define MPI3_EVENT_BROADCAST_PRIMITIVE_CHANGE (0x01)
+#define MPI3_EVENT_BROADCAST_PRIMITIVE_SES (0x02)
+#define MPI3_EVENT_BROADCAST_PRIMITIVE_EXPANDER (0x03)
+#define MPI3_EVENT_BROADCAST_PRIMITIVE_ASYNCHRONOUS_EVENT (0x04)
+#define MPI3_EVENT_BROADCAST_PRIMITIVE_RESERVED3 (0x05)
+#define MPI3_EVENT_BROADCAST_PRIMITIVE_RESERVED4 (0x06)
+#define MPI3_EVENT_BROADCAST_PRIMITIVE_CHANGE0_RESERVED (0x07)
+#define MPI3_EVENT_BROADCAST_PRIMITIVE_CHANGE1_RESERVED (0x08)
+struct _mpi3_event_data_sas_notify_primitive {
+ u8 phy_num;
+ u8 io_unit_port;
+ u8 reserved02;
+ u8 primitive;
+};
+
+#define MPI3_EVENT_NOTIFY_PRIMITIVE_ENABLE_SPINUP (0x01)
+#define MPI3_EVENT_NOTIFY_PRIMITIVE_POWER_LOSS_EXPECTED (0x02)
+#define MPI3_EVENT_NOTIFY_PRIMITIVE_RESERVED1 (0x03)
+#define MPI3_EVENT_NOTIFY_PRIMITIVE_RESERVED2 (0x04)
+#ifndef MPI3_EVENT_SAS_TOPO_PHY_COUNT
+#define MPI3_EVENT_SAS_TOPO_PHY_COUNT (1)
+#endif
+struct _mpi3_event_sas_topo_phy_entry {
+ __le16 attached_dev_handle;
+ u8 link_rate;
+ u8 status;
+};
+
+#define MPI3_EVENT_SAS_TOPO_LR_CURRENT_MASK (0xf0)
+#define MPI3_EVENT_SAS_TOPO_LR_CURRENT_SHIFT (4)
+#define MPI3_EVENT_SAS_TOPO_LR_PREV_MASK (0x0f)
+#define MPI3_EVENT_SAS_TOPO_LR_PREV_SHIFT (0)
+#define MPI3_EVENT_SAS_TOPO_LR_UNKNOWN_LINK_RATE (0x00)
+#define MPI3_EVENT_SAS_TOPO_LR_PHY_DISABLED (0x01)
+#define MPI3_EVENT_SAS_TOPO_LR_NEGOTIATION_FAILED (0x02)
+#define MPI3_EVENT_SAS_TOPO_LR_SATA_OOB_COMPLETE (0x03)
+#define MPI3_EVENT_SAS_TOPO_LR_PORT_SELECTOR (0x04)
+#define MPI3_EVENT_SAS_TOPO_LR_SMP_RESET_IN_PROGRESS (0x05)
+#define MPI3_EVENT_SAS_TOPO_LR_UNSUPPORTED_PHY (0x06)
+#define MPI3_EVENT_SAS_TOPO_LR_RATE_6_0 (0x0a)
+#define MPI3_EVENT_SAS_TOPO_LR_RATE_12_0 (0x0b)
+#define MPI3_EVENT_SAS_TOPO_LR_RATE_22_5 (0x0c)
+#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_MASK (0xc0)
+#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_SHIFT (6)
+#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_ACCESSIBLE (0x00)
+#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_NO_EXIST (0x40)
+#define MPI3_EVENT_SAS_TOPO_PHY_STATUS_VACANT (0x80)
+#define MPI3_EVENT_SAS_TOPO_PHY_RC_MASK (0x0f)
+#define MPI3_EVENT_SAS_TOPO_PHY_RC_TARG_NOT_RESPONDING (0x02)
+#define MPI3_EVENT_SAS_TOPO_PHY_RC_PHY_CHANGED (0x03)
+#define MPI3_EVENT_SAS_TOPO_PHY_RC_NO_CHANGE (0x04)
+#define MPI3_EVENT_SAS_TOPO_PHY_RC_DELAY_NOT_RESPONDING (0x05)
+#define MPI3_EVENT_SAS_TOPO_PHY_RC_RESPONDING (0x06)
+struct _mpi3_event_data_sas_topology_change_list {
+ __le16 enclosure_handle;
+ __le16 expander_dev_handle;
+ u8 num_phys;
+ u8 reserved05[3];
+ u8 num_entries;
+ u8 start_phy_num;
+ u8 exp_status;
+ u8 io_unit_port;
+ struct _mpi3_event_sas_topo_phy_entry phy_entry[MPI3_EVENT_SAS_TOPO_PHY_COUNT];
+};
+
+#define MPI3_EVENT_SAS_TOPO_ES_NO_EXPANDER (0x00)
+#define MPI3_EVENT_SAS_TOPO_ES_NOT_RESPONDING (0x02)
+#define MPI3_EVENT_SAS_TOPO_ES_RESPONDING (0x03)
+#define MPI3_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING (0x04)
+struct _mpi3_event_data_sas_phy_counter {
+ __le64 time_stamp;
+ __le32 reserved08;
+ u8 phy_event_code;
+ u8 phy_num;
+ __le16 reserved0e;
+ __le32 phy_event_info;
+ u8 counter_type;
+ u8 threshold_window;
+ u8 time_units;
+ u8 reserved17;
+ __le32 event_threshold;
+ __le16 threshold_flags;
+ __le16 reserved1e;
+};
+
+struct _mpi3_event_data_sas_device_disc_err {
+ __le16 dev_handle;
+ u8 reason_code;
+ u8 io_unit_port;
+ __le32 reserved04;
+ __le64 sas_address;
+};
+
+#define MPI3_EVENT_SAS_DISC_ERR_RC_SMP_FAILED (0x01)
+#define MPI3_EVENT_SAS_DISC_ERR_RC_SMP_TIMEOUT (0x02)
+struct _mpi3_event_data_pcie_enumeration {
+ u8 flags;
+ u8 reason_code;
+ u8 io_unit_port;
+ u8 reserved03;
+ __le32 enumeration_status;
+};
+
+#define MPI3_EVENT_PCIE_ENUM_FLAGS_DEVICE_CHANGE (0x02)
+#define MPI3_EVENT_PCIE_ENUM_FLAGS_IN_PROGRESS (0x01)
+#define MPI3_EVENT_PCIE_ENUM_RC_STARTED (0x01)
+#define MPI3_EVENT_PCIE_ENUM_RC_COMPLETED (0x02)
+#define MPI3_EVENT_PCIE_ENUM_ES_MAX_SWITCH_DEPTH_EXCEED (0x80000000)
+#define MPI3_EVENT_PCIE_ENUM_ES_MAX_SWITCHES_EXCEED (0x40000000)
+#define MPI3_EVENT_PCIE_ENUM_ES_MAX_DEVICES_EXCEED (0x20000000)
+#define MPI3_EVENT_PCIE_ENUM_ES_RESOURCES_EXHAUSTED (0x10000000)
+#ifndef MPI3_EVENT_PCIE_TOPO_PORT_COUNT
+#define MPI3_EVENT_PCIE_TOPO_PORT_COUNT (1)
+#endif
+struct _mpi3_event_pcie_topo_port_entry {
+ __le16 attached_dev_handle;
+ u8 port_status;
+ u8 reserved03;
+ u8 current_port_info;
+ u8 reserved05;
+ u8 previous_port_info;
+ u8 reserved07;
+};
+
+#define MPI3_EVENT_PCIE_TOPO_PS_NOT_RESPONDING (0x02)
+#define MPI3_EVENT_PCIE_TOPO_PS_PORT_CHANGED (0x03)
+#define MPI3_EVENT_PCIE_TOPO_PS_NO_CHANGE (0x04)
+#define MPI3_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING (0x05)
+#define MPI3_EVENT_PCIE_TOPO_PS_RESPONDING (0x06)
+#define MPI3_EVENT_PCIE_TOPO_PI_LANES_MASK (0xf0)
+#define MPI3_EVENT_PCIE_TOPO_PI_LANES_UNKNOWN (0x00)
+#define MPI3_EVENT_PCIE_TOPO_PI_LANES_1 (0x10)
+#define MPI3_EVENT_PCIE_TOPO_PI_LANES_2 (0x20)
+#define MPI3_EVENT_PCIE_TOPO_PI_LANES_4 (0x30)
+#define MPI3_EVENT_PCIE_TOPO_PI_LANES_8 (0x40)
+#define MPI3_EVENT_PCIE_TOPO_PI_LANES_16 (0x50)
+#define MPI3_EVENT_PCIE_TOPO_PI_RATE_MASK (0x0f)
+#define MPI3_EVENT_PCIE_TOPO_PI_RATE_UNKNOWN (0x00)
+#define MPI3_EVENT_PCIE_TOPO_PI_RATE_DISABLED (0x01)
+#define MPI3_EVENT_PCIE_TOPO_PI_RATE_2_5 (0x02)
+#define MPI3_EVENT_PCIE_TOPO_PI_RATE_5_0 (0x03)
+#define MPI3_EVENT_PCIE_TOPO_PI_RATE_8_0 (0x04)
+#define MPI3_EVENT_PCIE_TOPO_PI_RATE_16_0 (0x05)
+#define MPI3_EVENT_PCIE_TOPO_PI_RATE_32_0 (0x06)
+struct _mpi3_event_data_pcie_topology_change_list {
+ __le16 enclosure_handle;
+ __le16 switch_dev_handle;
+ u8 num_ports;
+ u8 reserved05[3];
+ u8 num_entries;
+ u8 start_port_num;
+ u8 switch_status;
+ u8 io_unit_port;
+ __le32 reserved0c;
+ struct _mpi3_event_pcie_topo_port_entry port_entry[MPI3_EVENT_PCIE_TOPO_PORT_COUNT];
+};
+
+#define MPI3_EVENT_PCIE_TOPO_SS_NO_PCIE_SWITCH (0x00)
+#define MPI3_EVENT_PCIE_TOPO_SS_NOT_RESPONDING (0x02)
+#define MPI3_EVENT_PCIE_TOPO_SS_RESPONDING (0x03)
+#define MPI3_EVENT_PCIE_TOPO_SS_DELAY_NOT_RESPONDING (0x04)
+struct _mpi3_event_data_sas_init_dev_status_change {
+ u8 reason_code;
+ u8 io_unit_port;
+ __le16 dev_handle;
+ __le32 reserved04;
+ __le64 sas_address;
+};
+
+#define MPI3_EVENT_SAS_INIT_RC_ADDED (0x01)
+#define MPI3_EVENT_SAS_INIT_RC_NOT_RESPONDING (0x02)
+struct _mpi3_event_data_sas_init_table_overflow {
+ __le16 max_init;
+ __le16 current_init;
+ __le32 reserved04;
+ __le64 sas_address;
+};
+
+struct _mpi3_event_data_hard_reset_received {
+ u8 reserved00;
+ u8 io_unit_port;
+ __le16 reserved02;
+};
+
+#define MPI3_PEL_LOCALE_FLAGS_NON_BLOCKING_BOOT_EVENT (0x0200)
+#define MPI3_PEL_LOCALE_FLAGS_BLOCKING_BOOT_EVENT (0x0100)
+#define MPI3_PEL_LOCALE_FLAGS_PCIE (0x0080)
+#define MPI3_PEL_LOCALE_FLAGS_CONFIGURATION (0x0040)
+#define MPI3_PEL_LOCALE_FLAGS_CONTROLER (0x0020)
+#define MPI3_PEL_LOCALE_FLAGS_SAS (0x0010)
+#define MPI3_PEL_LOCALE_FLAGS_EPACK (0x0008)
+#define MPI3_PEL_LOCALE_FLAGS_ENCLOSURE (0x0004)
+#define MPI3_PEL_LOCALE_FLAGS_PD (0x0002)
+#define MPI3_PEL_LOCALE_FLAGS_VD (0x0001)
+#define MPI3_PEL_CLASS_DEBUG (0x00)
+#define MPI3_PEL_CLASS_PROGRESS (0x01)
+#define MPI3_PEL_CLASS_INFORMATIONAL (0x02)
+#define MPI3_PEL_CLASS_WARNING (0x03)
+#define MPI3_PEL_CLASS_CRITICAL (0x04)
+#define MPI3_PEL_CLASS_FATAL (0x05)
+#define MPI3_PEL_CLASS_FAULT (0x06)
+#define MPI3_PEL_CLEARTYPE_CLEAR (0x00)
+#define MPI3_PEL_WAITTIME_INFINITE_WAIT (0x00)
+#define MPI3_PEL_ACTION_GET_SEQNUM (0x01)
+#define MPI3_PEL_ACTION_MARK_CLEAR (0x02)
+#define MPI3_PEL_ACTION_GET_LOG (0x03)
+#define MPI3_PEL_ACTION_GET_COUNT (0x04)
+#define MPI3_PEL_ACTION_WAIT (0x05)
+#define MPI3_PEL_ACTION_ABORT (0x06)
+#define MPI3_PEL_ACTION_GET_PRINT_STRINGS (0x07)
+#define MPI3_PEL_ACTION_ACKNOWLEDGE (0x08)
+#define MPI3_PEL_STATUS_SUCCESS (0x00)
+#define MPI3_PEL_STATUS_NOT_FOUND (0x01)
+#define MPI3_PEL_STATUS_ABORTED (0x02)
+#define MPI3_PEL_STATUS_NOT_READY (0x03)
+struct _mpi3_pel_seq {
+ __le32 newest;
+ __le32 oldest;
+ __le32 clear;
+ __le32 shutdown;
+ __le32 boot;
+ __le32 last_acknowledged;
+};
+
+struct _mpi3_pel_entry {
+ __le32 sequence_number;
+ __le32 time_stamp[2];
+ __le16 log_code;
+ __le16 arg_type;
+ __le16 locale;
+ u8 class;
+ u8 reserved13;
+ u8 ext_num;
+ u8 num_exts;
+ u8 arg_data_size;
+ u8 fixed_format_size;
+ __le32 reserved18[2];
+ __le32 pel_info[24];
+};
+
+struct _mpi3_pel_list {
+ __le32 log_count;
+ __le32 reserved04;
+ struct _mpi3_pel_entry entry[1];
+};
+
+struct _mpi3_pel_arg_map {
+ u8 arg_type;
+ u8 length;
+ __le16 start_location;
+};
+
+#define MPI3_PEL_ARG_MAP_ARG_TYPE_APPEND_STRING (0x00)
+#define MPI3_PEL_ARG_MAP_ARG_TYPE_INTEGER (0x01)
+#define MPI3_PEL_ARG_MAP_ARG_TYPE_STRING (0x02)
+#define MPI3_PEL_ARG_MAP_ARG_TYPE_BIT_FIELD (0x03)
+struct _mpi3_pel_print_string {
+ __le16 log_code;
+ __le16 string_length;
+ u8 num_arg_map;
+ u8 reserved05[3];
+ struct _mpi3_pel_arg_map arg_map[1];
+};
+
+struct _mpi3_pel_print_string_list {
+ __le32 num_print_strings;
+ __le32 residual_bytes_remain;
+ __le32 reserved08[2];
+ struct _mpi3_pel_print_string print_string[1];
+};
+
+#ifndef MPI3_PEL_ACTION_SPECIFIC_MAX
+#define MPI3_PEL_ACTION_SPECIFIC_MAX (1)
+#endif
+struct _mpi3_pel_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ u8 action;
+ u8 reserved0b;
+ __le32 action_specific[MPI3_PEL_ACTION_SPECIFIC_MAX];
+};
+
+struct _mpi3_pel_req_action_get_sequence_numbers {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ u8 action;
+ u8 reserved0b;
+ __le32 reserved0c[5];
+ union _mpi3_sge_union sgl;
+};
+
+struct _mpi3_pel_req_action_clear_log_marker {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ u8 action;
+ u8 reserved0b;
+ u8 clear_type;
+ u8 reserved0d[3];
+};
+
+struct _mpi3_pel_req_action_get_log {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ u8 action;
+ u8 reserved0b;
+ __le32 starting_sequence_number;
+ __le16 locale;
+ u8 class;
+ u8 reserved13;
+ __le32 reserved14[3];
+ union _mpi3_sge_union sgl;
+};
+
+struct _mpi3_pel_req_action_get_count {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ u8 action;
+ u8 reserved0b;
+ __le32 starting_sequence_number;
+ __le16 locale;
+ u8 class;
+ u8 reserved13;
+ __le32 reserved14[3];
+ union _mpi3_sge_union sgl;
+};
+
+struct _mpi3_pel_req_action_wait {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ u8 action;
+ u8 reserved0b;
+ __le32 starting_sequence_number;
+ __le16 locale;
+ u8 class;
+ u8 reserved13;
+ __le16 wait_time;
+ __le16 reserved16;
+ __le32 reserved18[2];
+};
+
+struct _mpi3_pel_req_action_abort {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ u8 action;
+ u8 reserved0b;
+ __le32 reserved0c;
+ __le16 abort_host_tag;
+ __le16 reserved12;
+ __le32 reserved14;
+};
+
+struct _mpi3_pel_req_action_get_print_strings {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ u8 action;
+ u8 reserved0b;
+ __le32 reserved0c;
+ __le16 start_log_code;
+ __le16 reserved12;
+ __le32 reserved14[3];
+ union _mpi3_sge_union sgl;
+};
+
+struct _mpi3_pel_req_action_acknowledge {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ u8 action;
+ u8 reserved0b;
+ __le32 sequence_number;
+ __le32 reserved10;
+};
+
+#define MPI3_PELACKNOWLEDGE_MSGFLAGS_SAFE_MODE_EXIT (0x01)
+struct _mpi3_pel_reply {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 ioc_use_only08;
+ __le16 ioc_status;
+ __le32 ioc_log_info;
+ u8 action;
+ u8 reserved11;
+ __le16 reserved12;
+ __le16 pe_log_status;
+ __le16 reserved16;
+ __le32 transfer_length;
+};
+
+struct _mpi3_ci_download_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ u8 action;
+ u8 reserved0b;
+ __le32 signature1;
+ __le32 total_image_size;
+ __le32 image_offset;
+ __le32 segment_size;
+ __le32 reserved1c;
+ union _mpi3_sge_union sgl;
+};
+
+#define MPI3_CI_DOWNLOAD_MSGFLAGS_LAST_SEGMENT (0x80)
+#define MPI3_CI_DOWNLOAD_MSGFLAGS_FORCE_FMC_ENABLE (0x40)
+#define MPI3_CI_DOWNLOAD_MSGFLAGS_SIGNED_NVDATA (0x20)
+#define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_MASK (0x03)
+#define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_FAST (0x00)
+#define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_MEDIUM (0x01)
+#define MPI3_CI_DOWNLOAD_MSGFLAGS_WRITE_CACHE_FLUSH_SLOW (0x02)
+#define MPI3_CI_DOWNLOAD_ACTION_DOWNLOAD (0x01)
+#define MPI3_CI_DOWNLOAD_ACTION_ONLINE_ACTIVATION (0x02)
+#define MPI3_CI_DOWNLOAD_ACTION_OFFLINE_ACTIVATION (0x03)
+#define MPI3_CI_DOWNLOAD_ACTION_GET_STATUS (0x04)
+struct _mpi3_ci_download_reply {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 ioc_use_only08;
+ __le16 ioc_status;
+ __le32 ioc_log_info;
+ u8 flags;
+ u8 cache_dirty;
+ u8 pending_count;
+ u8 reserved13;
+};
+
+#define MPI3_CI_DOWNLOAD_FLAGS_DOWNLOAD_IN_PROGRESS (0x80)
+#define MPI3_CI_DOWNLOAD_FLAGS_KEY_UPDATE_PENDING (0x10)
+#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_MASK (0x0e)
+#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_NOT_NEEDED (0x00)
+#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_AWAITING (0x02)
+#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_ONLINE_PENDING (0x04)
+#define MPI3_CI_DOWNLOAD_FLAGS_ACTIVATION_STATUS_OFFLINE_PENDING (0x06)
+#define MPI3_CI_DOWNLOAD_FLAGS_COMPATIBLE (0x01)
+struct _mpi3_ci_upload_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ __le16 reserved0a;
+ __le32 signature1;
+ __le32 reserved10;
+ __le32 image_offset;
+ __le32 segment_size;
+ __le32 reserved1c;
+ union _mpi3_sge_union sgl;
+};
+
+#define MPI3_CI_UPLOAD_MSGFLAGS_LOCATION_MASK (0x01)
+#define MPI3_CI_UPLOAD_MSGFLAGS_LOCATION_PRIMARY (0x00)
+#define MPI3_CI_UPLOAD_MSGFLAGS_LOCATION_SECONDARY (0x01)
+#define MPI3_CI_UPLOAD_MSGFLAGS_FORMAT_MASK (0x02)
+#define MPI3_CI_UPLOAD_MSGFLAGS_FORMAT_FLASH (0x00)
+#define MPI3_CI_UPLOAD_MSGFLAGS_FORMAT_EXECUTABLE (0x02)
+#define MPI3_CTRL_OP_FORCE_FULL_DISCOVERY (0x01)
+#define MPI3_CTRL_OP_LOOKUP_MAPPING (0x02)
+#define MPI3_CTRL_OP_UPDATE_TIMESTAMP (0x04)
+#define MPI3_CTRL_OP_GET_TIMESTAMP (0x05)
+#define MPI3_CTRL_OP_REMOVE_DEVICE (0x10)
+#define MPI3_CTRL_OP_CLOSE_PERSISTENT_CONNECTION (0x11)
+#define MPI3_CTRL_OP_HIDDEN_ACK (0x12)
+#define MPI3_CTRL_OP_SAS_SEND_PRIMITIVE (0x20)
+#define MPI3_CTRL_OP_SAS_CLEAR_ERROR_LOG (0x21)
+#define MPI3_CTRL_OP_PCIE_CLEAR_ERROR_LOG (0x22)
+#define MPI3_CTRL_OP_LOOKUP_MAPPING_PARAM8_LOOKUP_METHOD_INDEX (0x00)
+#define MPI3_CTRL_OP_UPDATE_TIMESTAMP_PARAM64_TIMESTAMP_INDEX (0x00)
+#define MPI3_CTRL_OP_REMOVE_DEVICE_PARAM16_DEVHANDLE_INDEX (0x00)
+#define MPI3_CTRL_OP_CLOSE_PERSIST_CONN_PARAM16_DEVHANDLE_INDEX (0x00)
+#define MPI3_CTRL_OP_HIDDEN_ACK_PARAM16_DEVHANDLE_INDEX (0x00)
+#define MPI3_CTRL_OP_SAS_SEND_PRIM_PARAM8_PHY_INDEX (0x00)
+#define MPI3_CTRL_OP_SAS_SEND_PRIM_PARAM8_PRIMSEQ_INDEX (0x01)
+#define MPI3_CTRL_OP_SAS_SEND_PRIM_PARAM32_PRIMITIVE_INDEX (0x00)
+#define MPI3_CTRL_OP_SAS_CLEAR_ERR_LOG_PARAM8_PHY_INDEX (0x00)
+#define MPI3_CTRL_OP_PCIE_CLEAR_ERR_LOG_PARAM8_PHY_INDEX (0x00)
+#define MPI3_CTRL_LOOKUP_METHOD_WWID_ADDRESS (0x01)
+#define MPI3_CTRL_LOOKUP_METHOD_ENCLOSURE_SLOT (0x02)
+#define MPI3_CTRL_LOOKUP_METHOD_SAS_DEVICE_NAME (0x03)
+#define MPI3_CTRL_LOOKUP_METHOD_PERSISTENT_ID (0x04)
+#define MPI3_CTRL_LOOKUP_METHOD_WWIDADDR_PARAM16_DEVH_INDEX (0)
+#define MPI3_CTRL_LOOKUP_METHOD_WWIDADDR_PARAM64_WWID_INDEX (0)
+#define MPI3_CTRL_LOOKUP_METHOD_ENCLSLOT_PARAM16_SLOTNUM_INDEX (0)
+#define MPI3_CTRL_LOOKUP_METHOD_ENCLSLOT_PARAM64_ENCLOSURELID_INDEX (0)
+#define MPI3_CTRL_LOOKUP_METHOD_SASDEVNAME_PARAM16_DEVH_INDEX (0)
+#define MPI3_CTRL_LOOKUP_METHOD_SASDEVNAME_PARAM64_DEVNAME_INDEX (0)
+#define MPI3_CTRL_LOOKUP_METHOD_PERSISTID_PARAM16_DEVH_INDEX (0)
+#define MPI3_CTRL_LOOKUP_METHOD_PERSISTID_PARAM16_PERSISTENT_ID_INDEX (1)
+#define MPI3_CTRL_LOOKUP_METHOD_VALUE16_DEVH_INDEX (0)
+#define MPI3_CTRL_GET_TIMESTAMP_VALUE64_TIMESTAMP_INDEX (0)
+#define MPI3_CTRL_PRIMFLAGS_SINGLE (0x01)
+#define MPI3_CTRL_PRIMFLAGS_TRIPLE (0x03)
+#define MPI3_CTRL_PRIMFLAGS_REDUNDANT (0x06)
+struct _mpi3_iounit_control_request {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ u8 reserved0a;
+ u8 operation;
+ __le32 reserved0c;
+ __le64 param64[2];
+ __le32 param32[4];
+ __le16 param16[4];
+ u8 param8[8];
+};
+
+struct _mpi3_iounit_control_reply {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 ioc_use_only08;
+ __le16 ioc_status;
+ __le32 ioc_log_info;
+ __le64 value64[2];
+ __le32 value32[4];
+ __le16 value16[4];
+ u8 value8[8];
+};
+#endif
diff --git a/drivers/scsi/mpi3mr/mpi/mpi30_transport.h b/drivers/scsi/mpi3mr/mpi/mpi30_transport.h
new file mode 100644
index 000000000000..d2a5e7e84b16
--- /dev/null
+++ b/drivers/scsi/mpi3mr/mpi/mpi30_transport.h
@@ -0,0 +1,486 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+/*
+ * Copyright 2016-2021 Broadcom Inc. All rights reserved.
+ *
+ * Name: mpi30_transport.h
+ * Description: Contains definitions for System Interface Register Set, Scatter Gather Lists etc
+ * Creation Date: 08/31/2016
+ * Version: 03.00.00
+ *
+ * mpi3.h Version: 03.00.00.18
+ *
+ *
+ * Version History
+ * ---------------
+ *
+ * Date Version Description
+ * -------- ----------- ------------------------------------------------------
+ * 11-30-18 03.00.00.08 Corresponds to Fusion-MPT MPI 3.0 Specification Rev H.
+ * 02-08-19 03.00.00.09 Corresponds to Fusion-MPT MPI 3.0 Specification Rev I.
+ * 05-03-19 03.00.00.10 Corresponds to Fusion-MPT MPI 3.0 Specification Rev J.
+ * 08-30-19 03.00.00.12 Corresponds to Fusion-MPT MPI 3.0 Specification Rev L.
+ * 11-01-19 03.00.00.13 Corresponds to Fusion-MPT MPI 3.0 Specification Rev M.
+ * 12-16-19 03.00.00.14 Corresponds to Fusion-MPT MPI 3.0 Specification Rev N.
+ * 02-28-20 03.00.00.15 Corresponds to Fusion-MPT MPI 3.0 Specification Rev O.
+ * 05-01-20 03.00.00.16 Corresponds to Fusion-MPT MPI 3.0 Specification Rev P.
+ * 06-26-20 03.00.00.17 Corresponds to Fusion-MPT MPI 3.0 Specification Rev Q.
+ * 08-28-20 03.00.00.18 Corresponds to Fusion-MPT MPI 3.0 Specification Rev R.
+ */
+#ifndef MPI30_TRANSPORT_H
+#define MPI30_TRANSPORT_H 1
+struct _mpi3_version_struct {
+ u8 dev;
+ u8 unit;
+ u8 minor;
+ u8 major;
+};
+
+union _mpi3_version_union {
+ struct _mpi3_version_struct mpi3_version;
+ __le32 word;
+};
+
+#define MPI3_VERSION_MAJOR (3)
+#define MPI3_VERSION_MINOR (0)
+#define MPI3_VERSION_UNIT (0)
+#define MPI3_VERSION_DEV (18)
+struct _mpi3_sysif_oper_queue_indexes {
+ __le16 producer_index;
+ __le16 reserved02;
+ __le16 consumer_index;
+ __le16 reserved06;
+};
+
+struct _mpi3_sysif_registers {
+ __le64 ioc_information;
+ union _mpi3_version_union version;
+ __le32 reserved0c[2];
+ __le32 ioc_configuration;
+ __le32 reserved18;
+ __le32 ioc_status;
+ __le32 reserved20;
+ __le32 admin_queue_num_entries;
+ __le64 admin_request_queue_address;
+ __le64 admin_reply_queue_address;
+ __le32 reserved38[2];
+ __le32 coalesce_control;
+ __le32 reserved44[1007];
+ __le16 admin_request_queue_pi;
+ __le16 reserved1002;
+ __le16 admin_reply_queue_ci;
+ __le16 reserved1006;
+ struct _mpi3_sysif_oper_queue_indexes oper_queue_indexes[383];
+ __le32 reserved1c00;
+ __le32 write_sequence;
+ __le32 host_diagnostic;
+ __le32 reserved1c0c;
+ __le32 fault;
+ __le32 fault_info[3];
+ __le32 reserved1c20[4];
+ __le64 hcb_address;
+ __le32 hcb_size;
+ __le32 reserved1c3c;
+ __le32 reply_free_host_index;
+ __le32 sense_buffer_free_host_index;
+ __le32 reserved1c48[2];
+ __le64 diag_rw_data;
+ __le64 diag_rw_address;
+ __le16 diag_rw_control;
+ __le16 diag_rw_status;
+ __le32 reserved1c64[35];
+ __le32 scratchpad[4];
+ __le32 reserved1d00[192];
+ __le32 device_assigned_registers[2048];
+};
+
+#define MPI3_SYSIF_IOC_INFO_LOW_OFFSET (0x00000000)
+#define MPI3_SYSIF_IOC_INFO_HIGH_OFFSET (0x00000004)
+#define MPI3_SYSIF_IOC_INFO_LOW_TIMEOUT_MASK (0xff000000)
+#define MPI3_SYSIF_IOC_INFO_LOW_TIMEOUT_SHIFT (24)
+#define MPI3_SYSIF_IOC_CONFIG_OFFSET (0x00000014)
+#define MPI3_SYSIF_IOC_CONFIG_OPER_RPY_ENT_SZ (0x00f00000)
+#define MPI3_SYSIF_IOC_CONFIG_OPER_RPY_ENT_SZ_SHIFT (20)
+#define MPI3_SYSIF_IOC_CONFIG_OPER_REQ_ENT_SZ (0x000f0000)
+#define MPI3_SYSIF_IOC_CONFIG_OPER_REQ_ENT_SZ_SHIFT (16)
+#define MPI3_SYSIF_IOC_CONFIG_SHUTDOWN_MASK (0x0000c000)
+#define MPI3_SYSIF_IOC_CONFIG_SHUTDOWN_NO (0x00000000)
+#define MPI3_SYSIF_IOC_CONFIG_SHUTDOWN_NORMAL (0x00004000)
+#define MPI3_SYSIF_IOC_CONFIG_DEVICE_SHUTDOWN (0x00002000)
+#define MPI3_SYSIF_IOC_CONFIG_DIAG_SAVE (0x00000010)
+#define MPI3_SYSIF_IOC_CONFIG_ENABLE_IOC (0x00000001)
+#define MPI3_SYSIF_IOC_STATUS_OFFSET (0x0000001c)
+#define MPI3_SYSIF_IOC_STATUS_RESET_HISTORY (0x00000010)
+#define MPI3_SYSIF_IOC_STATUS_SHUTDOWN_MASK (0x0000000c)
+#define MPI3_SYSIF_IOC_STATUS_SHUTDOWN_NONE (0x00000000)
+#define MPI3_SYSIF_IOC_STATUS_SHUTDOWN_IN_PROGRESS (0x00000004)
+#define MPI3_SYSIF_IOC_STATUS_SHUTDOWN_COMPLETE (0x00000008)
+#define MPI3_SYSIF_IOC_STATUS_FAULT (0x00000002)
+#define MPI3_SYSIF_IOC_STATUS_READY (0x00000001)
+#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_OFFSET (0x00000024)
+#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_REQ_MASK (0x0fff)
+#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_REPLY_OFFSET (0x00000026)
+#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_REPLY_MASK (0x0fff0000)
+#define MPI3_SYSIF_ADMIN_Q_NUM_ENTRIES_REPLY_SHIFT (16)
+#define MPI3_SYSIF_ADMIN_REQ_Q_ADDR_LOW_OFFSET (0x00000028)
+#define MPI3_SYSIF_ADMIN_REQ_Q_ADDR_HIGH_OFFSET (0x0000002c)
+#define MPI3_SYSIF_ADMIN_REPLY_Q_ADDR_LOW_OFFSET (0x00000030)
+#define MPI3_SYSIF_ADMIN_REPLY_Q_ADDR_HIGH_OFFSET (0x00000034)
+#define MPI3_SYSIF_COALESCE_CONTROL_OFFSET (0x00000040)
+#define MPI3_SYSIF_COALESCE_CONTROL_ENABLE_MASK (0xc0000000)
+#define MPI3_SYSIF_COALESCE_CONTROL_ENABLE_NO_CHANGE (0x00000000)
+#define MPI3_SYSIF_COALESCE_CONTROL_ENABLE_DISABLE (0x40000000)
+#define MPI3_SYSIF_COALESCE_CONTROL_ENABLE_ENABLE (0xc0000000)
+#define MPI3_SYSIF_COALESCE_CONTROL_VALID (0x30000000)
+#define MPI3_SYSIF_COALESCE_CONTROL_QUEUE_ID_MASK (0x00ff0000)
+#define MPI3_SYSIF_COALESCE_CONTROL_QUEUE_ID_SHIFT (16)
+#define MPI3_SYSIF_COALESCE_CONTROL_TIMEOUT_MASK (0x0000ff00)
+#define MPI3_SYSIF_COALESCE_CONTROL_TIMEOUT_SHIFT (8)
+#define MPI3_SYSIF_COALESCE_CONTROL_DEPTH_MASK (0x000000ff)
+#define MPI3_SYSIF_COALESCE_CONTROL_DEPTH_SHIFT (0)
+#define MPI3_SYSIF_ADMIN_REQ_Q_PI_OFFSET (0x00001000)
+#define MPI3_SYSIF_ADMIN_REPLY_Q_CI_OFFSET (0x00001004)
+#define MPI3_SYSIF_OPER_REQ_Q_PI_OFFSET (0x00001008)
+#define MPI3_SYSIF_OPER_REQ_Q_N_PI_OFFSET(n) (MPI3_SYSIF_OPER_REQ_Q_PI_OFFSET + (((n) - 1) * 8))
+#define MPI3_SYSIF_OPER_REPLY_Q_CI_OFFSET (0x0000100c)
+#define MPI3_SYSIF_OPER_REPLY_Q_N_CI_OFFSET(n) (MPI3_SYSIF_OPER_REPLY_Q_CI_OFFSET + (((n) - 1) * 8))
+#define MPI3_SYSIF_WRITE_SEQUENCE_OFFSET (0x00001c04)
+#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_MASK (0x0000000f)
+#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_FLUSH (0x0)
+#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_1ST (0xf)
+#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_2ND (0x4)
+#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_3RD (0xb)
+#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_4TH (0x2)
+#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_5TH (0x7)
+#define MPI3_SYSIF_WRITE_SEQUENCE_KEY_VALUE_6TH (0xd)
+#define MPI3_SYSIF_HOST_DIAG_OFFSET (0x00001c08)
+#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_MASK (0x00000700)
+#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_NO_RESET (0x00000000)
+#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_SOFT_RESET (0x00000100)
+#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_FLASH_RCVRY_RESET (0x00000200)
+#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_COMPLETE_RESET (0x00000300)
+#define MPI3_SYSIF_HOST_DIAG_RESET_ACTION_DIAG_FAULT (0x00000700)
+#define MPI3_SYSIF_HOST_DIAG_SAVE_IN_PROGRESS (0x00000080)
+#define MPI3_SYSIF_HOST_DIAG_SECURE_BOOT (0x00000040)
+#define MPI3_SYSIF_HOST_DIAG_CLEAR_INVALID_FW_IMAGE (0x00000020)
+#define MPI3_SYSIF_HOST_DIAG_INVALID_FW_IMAGE (0x00000010)
+#define MPI3_SYSIF_HOST_DIAG_HCBENABLE (0x00000008)
+#define MPI3_SYSIF_HOST_DIAG_HCBMODE (0x00000004)
+#define MPI3_SYSIF_HOST_DIAG_DIAG_RW_ENABLE (0x00000002)
+#define MPI3_SYSIF_HOST_DIAG_DIAG_WRITE_ENABLE (0x00000001)
+#define MPI3_SYSIF_FAULT_OFFSET (0x00001c10)
+#define MPI3_SYSIF_FAULT_FUNC_AREA_MASK (0xff000000)
+#define MPI3_SYSIF_FAULT_FUNC_AREA_SHIFT (24)
+#define MPI3_SYSIF_FAULT_FUNC_AREA_MPI_DEFINED (0x00000000)
+#define MPI3_SYSIF_FAULT_CODE_MASK (0x0000ffff)
+#define MPI3_SYSIF_FAULT_CODE_DIAG_FAULT_RESET (0x0000f000)
+#define MPI3_SYSIF_FAULT_CODE_CI_ACTIVATION_RESET (0x0000f001)
+#define MPI3_SYSIF_FAULT_CODE_SOFT_RESET_IN_PROGRESS (0x0000f002)
+#define MPI3_SYSIF_FAULT_CODE_COMPLETE_RESET_NEEDED (0x0000f003)
+#define MPI3_SYSIF_FAULT_CODE_SAFE_MODE_EXIT (0x0000f004)
+#define MPI3_SYSIF_FAULT_CODE_FACTORY_RESET (0x0000f005)
+#define MPI3_SYSIF_FAULT_INFO0_OFFSET (0x00001c14)
+#define MPI3_SYSIF_FAULT_INFO1_OFFSET (0x00001c18)
+#define MPI3_SYSIF_FAULT_INFO2_OFFSET (0x00001c1c)
+#define MPI3_SYSIF_HCB_ADDRESS_LOW_OFFSET (0x00001c30)
+#define MPI3_SYSIF_HCB_ADDRESS_HIGH_OFFSET (0x00001c34)
+#define MPI3_SYSIF_HCB_SIZE_OFFSET (0x00001c38)
+#define MPI3_SYSIF_HCB_SIZE_SIZE_MASK (0xfffff000)
+#define MPI3_SYSIF_HCB_SIZE_SIZE_SHIFT (12)
+#define MPI3_SYSIF_HCB_SIZE_HCDW_ENABLE (0x00000001)
+#define MPI3_SYSIF_REPLY_FREE_HOST_INDEX_OFFSET (0x00001c40)
+#define MPI3_SYSIF_SENSE_BUF_FREE_HOST_INDEX_OFFSET (0x00001c44)
+#define MPI3_SYSIF_DIAG_RW_DATA_LOW_OFFSET (0x00001c50)
+#define MPI3_SYSIF_DIAG_RW_DATA_HIGH_OFFSET (0x00001c54)
+#define MPI3_SYSIF_DIAG_RW_ADDRESS_LOW_OFFSET (0x00001c58)
+#define MPI3_SYSIF_DIAG_RW_ADDRESS_HIGH_OFFSET (0x00001c5c)
+#define MPI3_SYSIF_DIAG_RW_CONTROL_OFFSET (0x00001c60)
+#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_MASK (0x00000030)
+#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_1BYTE (0x00000000)
+#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_2BYTES (0x00000010)
+#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_4BYTES (0x00000020)
+#define MPI3_SYSIF_DIAG_RW_CONTROL_LEN_8BYTES (0x00000030)
+#define MPI3_SYSIF_DIAG_RW_CONTROL_RESET (0x00000004)
+#define MPI3_SYSIF_DIAG_RW_CONTROL_DIR_MASK (0x00000002)
+#define MPI3_SYSIF_DIAG_RW_CONTROL_DIR_READ (0x00000000)
+#define MPI3_SYSIF_DIAG_RW_CONTROL_DIR_WRITE (0x00000002)
+#define MPI3_SYSIF_DIAG_RW_CONTROL_START (0x00000001)
+#define MPI3_SYSIF_DIAG_RW_STATUS_OFFSET (0x00001c62)
+#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_MASK (0x0000000e)
+#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_SUCCESS (0x00000000)
+#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_INV_ADDR (0x00000002)
+#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_ACC_ERR (0x00000004)
+#define MPI3_SYSIF_DIAG_RW_STATUS_STATUS_PAR_ERR (0x00000006)
+#define MPI3_SYSIF_DIAG_RW_STATUS_BUSY (0x00000001)
+#define MPI3_SYSIF_SCRATCHPAD0_OFFSET (0x00001cf0)
+#define MPI3_SYSIF_SCRATCHPAD1_OFFSET (0x00001cf4)
+#define MPI3_SYSIF_SCRATCHPAD2_OFFSET (0x00001cf8)
+#define MPI3_SYSIF_SCRATCHPAD3_OFFSET (0x00001cfc)
+#define MPI3_SYSIF_DEVICE_ASSIGNED_REGS_OFFSET (0x00002000)
+#define MPI3_SYSIF_DIAG_SAVE_TIMEOUT (60)
+struct _mpi3_default_reply_descriptor {
+ __le32 descriptor_type_dependent1[2];
+ __le16 request_queue_ci;
+ __le16 request_queue_id;
+ __le16 descriptor_type_dependent2;
+ __le16 reply_flags;
+};
+
+#define MPI3_REPLY_DESCRIPT_FLAGS_PHASE_MASK (0x0001)
+#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_MASK (0xf000)
+#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_ADDRESS_REPLY (0x0000)
+#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_SUCCESS (0x1000)
+#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_TARGET_COMMAND_BUFFER (0x2000)
+#define MPI3_REPLY_DESCRIPT_FLAGS_TYPE_STATUS (0x3000)
+struct _mpi3_address_reply_descriptor {
+ __le64 reply_frame_address;
+ __le16 request_queue_ci;
+ __le16 request_queue_id;
+ __le16 reserved0c;
+ __le16 reply_flags;
+};
+
+struct _mpi3_success_reply_descriptor {
+ __le32 reserved00[2];
+ __le16 request_queue_ci;
+ __le16 request_queue_id;
+ __le16 host_tag;
+ __le16 reply_flags;
+};
+
+struct _mpi3_target_command_buffer_reply_descriptor {
+ __le32 reserved00;
+ __le16 initiator_dev_handle;
+ u8 phy_num;
+ u8 reserved07;
+ __le16 request_queue_ci;
+ __le16 request_queue_id;
+ __le16 io_index;
+ __le16 reply_flags;
+};
+
+struct _mpi3_status_reply_descriptor {
+ __le16 ioc_status;
+ __le16 reserved02;
+ __le32 ioc_log_info;
+ __le16 request_queue_ci;
+ __le16 request_queue_id;
+ __le16 host_tag;
+ __le16 reply_flags;
+};
+
+#define MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_LOGINFOAVAIL (0x8000)
+#define MPI3_REPLY_DESCRIPT_STATUS_IOCSTATUS_STATUS_MASK (0x7fff)
+#define MPI3_REPLY_DESCRIPT_STATUS_IOCLOGINFO_TYPE_MASK (0xf0000000)
+#define MPI3_REPLY_DESCRIPT_STATUS_IOCLOGINFO_TYPE_NO_INFO (0x00000000)
+#define MPI3_REPLY_DESCRIPT_STATUS_IOCLOGINFO_TYPE_SAS (0x30000000)
+#define MPI3_REPLY_DESCRIPT_STATUS_IOCLOGINFO_DATA_MASK (0x0fffffff)
+union _mpi3_reply_descriptors_union {
+ struct _mpi3_default_reply_descriptor default_reply;
+ struct _mpi3_address_reply_descriptor address_reply;
+ struct _mpi3_success_reply_descriptor success;
+ struct _mpi3_target_command_buffer_reply_descriptor target_command_buffer;
+ struct _mpi3_status_reply_descriptor status;
+ __le32 words[4];
+};
+
+struct _mpi3_sge_common {
+ __le64 address;
+ __le32 length;
+ u8 reserved0c[3];
+ u8 flags;
+};
+
+struct _mpi3_sge_bit_bucket {
+ __le64 reserved00;
+ __le32 length;
+ u8 reserved0c[3];
+ u8 flags;
+};
+
+struct _mpi3_sge_extended_eedp {
+ u8 user_data_size;
+ u8 reserved01;
+ __le16 eedp_flags;
+ __le32 secondary_reference_tag;
+ __le16 secondary_application_tag;
+ __le16 application_tag_translation_mask;
+ __le16 reserved0c;
+ u8 extended_operation;
+ u8 flags;
+};
+
+union _mpi3_sge_union {
+ struct _mpi3_sge_common simple;
+ struct _mpi3_sge_common chain;
+ struct _mpi3_sge_common last_chain;
+ struct _mpi3_sge_bit_bucket bit_bucket;
+ struct _mpi3_sge_extended_eedp eedp;
+ __le32 words[4];
+};
+
+#define MPI3_SGE_FLAGS_ELEMENT_TYPE_MASK (0xf0)
+#define MPI3_SGE_FLAGS_ELEMENT_TYPE_SIMPLE (0x00)
+#define MPI3_SGE_FLAGS_ELEMENT_TYPE_BIT_BUCKET (0x10)
+#define MPI3_SGE_FLAGS_ELEMENT_TYPE_CHAIN (0x20)
+#define MPI3_SGE_FLAGS_ELEMENT_TYPE_LAST_CHAIN (0x30)
+#define MPI3_SGE_FLAGS_ELEMENT_TYPE_EXTENDED (0xf0)
+#define MPI3_SGE_FLAGS_END_OF_LIST (0x08)
+#define MPI3_SGE_FLAGS_END_OF_BUFFER (0x04)
+#define MPI3_SGE_FLAGS_DLAS_MASK (0x03)
+#define MPI3_SGE_FLAGS_DLAS_SYSTEM (0x00)
+#define MPI3_SGE_FLAGS_DLAS_IOC_DDR (0x01)
+#define MPI3_SGE_FLAGS_DLAS_IOC_CTL (0x02)
+#define MPI3_SGE_EXT_OPER_EEDP (0x00)
+#define MPI3_EEDPFLAGS_INCR_PRI_REF_TAG (0x8000)
+#define MPI3_EEDPFLAGS_INCR_SEC_REF_TAG (0x4000)
+#define MPI3_EEDPFLAGS_INCR_PRI_APP_TAG (0x2000)
+#define MPI3_EEDPFLAGS_INCR_SEC_APP_TAG (0x1000)
+#define MPI3_EEDPFLAGS_ESC_PASSTHROUGH (0x0800)
+#define MPI3_EEDPFLAGS_CHK_REF_TAG (0x0400)
+#define MPI3_EEDPFLAGS_CHK_APP_TAG (0x0200)
+#define MPI3_EEDPFLAGS_CHK_GUARD (0x0100)
+#define MPI3_EEDPFLAGS_ESC_MODE_MASK (0x00c0)
+#define MPI3_EEDPFLAGS_ESC_MODE_DO_NOT_DISABLE (0x0040)
+#define MPI3_EEDPFLAGS_ESC_MODE_APPTAG_DISABLE (0x0080)
+#define MPI3_EEDPFLAGS_ESC_MODE_APPTAG_REFTAG_DISABLE (0x00c0)
+#define MPI3_EEDPFLAGS_HOST_GUARD_MASK (0x0030)
+#define MPI3_EEDPFLAGS_HOST_GUARD_T10_CRC (0x0000)
+#define MPI3_EEDPFLAGS_HOST_GUARD_IP_CHKSUM (0x0010)
+#define MPI3_EEDPFLAGS_HOST_GUARD_OEM_SPECIFIC (0x0020)
+#define MPI3_EEDPFLAGS_PT_REF_TAG (0x0008)
+#define MPI3_EEDPFLAGS_EEDP_OP_MASK (0x0007)
+#define MPI3_EEDPFLAGS_EEDP_OP_NOOP (0x0000)
+#define MPI3_EEDPFLAGS_EEDP_OP_CHECK (0x0001)
+#define MPI3_EEDPFLAGS_EEDP_OP_STRIP (0x0002)
+#define MPI3_EEDPFLAGS_EEDP_OP_CHECK_REMOVE (0x0003)
+#define MPI3_EEDPFLAGS_EEDP_OP_INSERT (0x0004)
+#define MPI3_EEDPFLAGS_EEDP_OP_REPLACE (0x0006)
+#define MPI3_EEDPFLAGS_EEDP_OP_CHECK_REGEN (0x0007)
+#define MPI3_EEDP_UDS_512 (0x01)
+#define MPI3_EEDP_UDS_520 (0x02)
+#define MPI3_EEDP_UDS_4080 (0x03)
+#define MPI3_EEDP_UDS_4088 (0x04)
+#define MPI3_EEDP_UDS_4096 (0x05)
+#define MPI3_EEDP_UDS_4104 (0x06)
+#define MPI3_EEDP_UDS_4160 (0x07)
+struct _mpi3_request_header {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 change_count;
+ __le16 function_dependent;
+};
+
+struct _mpi3_default_reply {
+ __le16 host_tag;
+ u8 ioc_use_only02;
+ u8 function;
+ __le16 ioc_use_only04;
+ u8 ioc_use_only06;
+ u8 msg_flags;
+ __le16 ioc_use_only08;
+ __le16 ioc_status;
+ __le32 ioc_log_info;
+};
+
+#define MPI3_HOST_TAG_INVALID (0xffff)
+#define MPI3_FUNCTION_IOC_FACTS (0x01)
+#define MPI3_FUNCTION_IOC_INIT (0x02)
+#define MPI3_FUNCTION_PORT_ENABLE (0x03)
+#define MPI3_FUNCTION_EVENT_NOTIFICATION (0x04)
+#define MPI3_FUNCTION_EVENT_ACK (0x05)
+#define MPI3_FUNCTION_CI_DOWNLOAD (0x06)
+#define MPI3_FUNCTION_CI_UPLOAD (0x07)
+#define MPI3_FUNCTION_IO_UNIT_CONTROL (0x08)
+#define MPI3_FUNCTION_PERSISTENT_EVENT_LOG (0x09)
+#define MPI3_FUNCTION_MGMT_PASSTHROUGH (0x0a)
+#define MPI3_FUNCTION_CONFIG (0x10)
+#define MPI3_FUNCTION_SCSI_IO (0x20)
+#define MPI3_FUNCTION_SCSI_TASK_MGMT (0x21)
+#define MPI3_FUNCTION_SMP_PASSTHROUGH (0x22)
+#define MPI3_FUNCTION_NVME_ENCAPSULATED (0x24)
+#define MPI3_FUNCTION_TARGET_ASSIST (0x30)
+#define MPI3_FUNCTION_TARGET_STATUS_SEND (0x31)
+#define MPI3_FUNCTION_TARGET_MODE_ABORT (0x32)
+#define MPI3_FUNCTION_TARGET_CMD_BUF_POST_BASE (0x33)
+#define MPI3_FUNCTION_TARGET_CMD_BUF_POST_LIST (0x34)
+#define MPI3_FUNCTION_CREATE_REQUEST_QUEUE (0x70)
+#define MPI3_FUNCTION_DELETE_REQUEST_QUEUE (0x71)
+#define MPI3_FUNCTION_CREATE_REPLY_QUEUE (0x72)
+#define MPI3_FUNCTION_DELETE_REPLY_QUEUE (0x73)
+#define MPI3_FUNCTION_TOOLBOX (0x80)
+#define MPI3_FUNCTION_DIAG_BUFFER_POST (0x81)
+#define MPI3_FUNCTION_DIAG_BUFFER_MANAGE (0x82)
+#define MPI3_FUNCTION_DIAG_BUFFER_UPLOAD (0x83)
+#define MPI3_FUNCTION_MIN_IOC_USE_ONLY (0xc0)
+#define MPI3_FUNCTION_MAX_IOC_USE_ONLY (0xef)
+#define MPI3_FUNCTION_MIN_PRODUCT_SPECIFIC (0xf0)
+#define MPI3_FUNCTION_MAX_PRODUCT_SPECIFIC (0xff)
+#define MPI3_IOCSTATUS_LOG_INFO_AVAIL_MASK (0x8000)
+#define MPI3_IOCSTATUS_LOG_INFO_AVAILABLE (0x8000)
+#define MPI3_IOCSTATUS_STATUS_MASK (0x7fff)
+#define MPI3_IOCSTATUS_SUCCESS (0x0000)
+#define MPI3_IOCSTATUS_INVALID_FUNCTION (0x0001)
+#define MPI3_IOCSTATUS_BUSY (0x0002)
+#define MPI3_IOCSTATUS_INVALID_SGL (0x0003)
+#define MPI3_IOCSTATUS_INTERNAL_ERROR (0x0004)
+#define MPI3_IOCSTATUS_INSUFFICIENT_RESOURCES (0x0006)
+#define MPI3_IOCSTATUS_INVALID_FIELD (0x0007)
+#define MPI3_IOCSTATUS_INVALID_STATE (0x0008)
+#define MPI3_IOCSTATUS_INSUFFICIENT_POWER (0x000a)
+#define MPI3_IOCSTATUS_INVALID_CHANGE_COUNT (0x000b)
+#define MPI3_IOCSTATUS_FAILURE (0x001f)
+#define MPI3_IOCSTATUS_CONFIG_INVALID_ACTION (0x0020)
+#define MPI3_IOCSTATUS_CONFIG_INVALID_TYPE (0x0021)
+#define MPI3_IOCSTATUS_CONFIG_INVALID_PAGE (0x0022)
+#define MPI3_IOCSTATUS_CONFIG_INVALID_DATA (0x0023)
+#define MPI3_IOCSTATUS_CONFIG_NO_DEFAULTS (0x0024)
+#define MPI3_IOCSTATUS_CONFIG_CANT_COMMIT (0x0025)
+#define MPI3_IOCSTATUS_SCSI_RECOVERED_ERROR (0x0040)
+#define MPI3_IOCSTATUS_SCSI_TM_NOT_SUPPORTED (0x0041)
+#define MPI3_IOCSTATUS_SCSI_INVALID_DEVHANDLE (0x0042)
+#define MPI3_IOCSTATUS_SCSI_DEVICE_NOT_THERE (0x0043)
+#define MPI3_IOCSTATUS_SCSI_DATA_OVERRUN (0x0044)
+#define MPI3_IOCSTATUS_SCSI_DATA_UNDERRUN (0x0045)
+#define MPI3_IOCSTATUS_SCSI_IO_DATA_ERROR (0x0046)
+#define MPI3_IOCSTATUS_SCSI_PROTOCOL_ERROR (0x0047)
+#define MPI3_IOCSTATUS_SCSI_TASK_TERMINATED (0x0048)
+#define MPI3_IOCSTATUS_SCSI_RESIDUAL_MISMATCH (0x0049)
+#define MPI3_IOCSTATUS_SCSI_TASK_MGMT_FAILED (0x004a)
+#define MPI3_IOCSTATUS_SCSI_IOC_TERMINATED (0x004b)
+#define MPI3_IOCSTATUS_SCSI_EXT_TERMINATED (0x004c)
+#define MPI3_IOCSTATUS_EEDP_GUARD_ERROR (0x004d)
+#define MPI3_IOCSTATUS_EEDP_REF_TAG_ERROR (0x004e)
+#define MPI3_IOCSTATUS_EEDP_APP_TAG_ERROR (0x004f)
+#define MPI3_IOCSTATUS_TARGET_INVALID_IO_INDEX (0x0062)
+#define MPI3_IOCSTATUS_TARGET_ABORTED (0x0063)
+#define MPI3_IOCSTATUS_TARGET_NO_CONN_RETRYABLE (0x0064)
+#define MPI3_IOCSTATUS_TARGET_NO_CONNECTION (0x0065)
+#define MPI3_IOCSTATUS_TARGET_XFER_COUNT_MISMATCH (0x006a)
+#define MPI3_IOCSTATUS_TARGET_DATA_OFFSET_ERROR (0x006d)
+#define MPI3_IOCSTATUS_TARGET_TOO_MUCH_WRITE_DATA (0x006e)
+#define MPI3_IOCSTATUS_TARGET_IU_TOO_SHORT (0x006f)
+#define MPI3_IOCSTATUS_TARGET_ACK_NAK_TIMEOUT (0x0070)
+#define MPI3_IOCSTATUS_TARGET_NAK_RECEIVED (0x0071)
+#define MPI3_IOCSTATUS_SAS_SMP_REQUEST_FAILED (0x0090)
+#define MPI3_IOCSTATUS_SAS_SMP_DATA_OVERRUN (0x0091)
+#define MPI3_IOCSTATUS_DIAGNOSTIC_RELEASED (0x00a0)
+#define MPI3_IOCSTATUS_CI_UNSUPPORTED (0x00b0)
+#define MPI3_IOCSTATUS_CI_UPDATE_SEQUENCE (0x00b1)
+#define MPI3_IOCSTATUS_CI_VALIDATION_FAILED (0x00b2)
+#define MPI3_IOCSTATUS_CI_UPDATE_PENDING (0x00b3)
+#define MPI3_IOCSTATUS_SECURITY_KEY_REQUIRED (0x00c0)
+#define MPI3_IOCSTATUS_INVALID_QUEUE_ID (0x0f00)
+#define MPI3_IOCSTATUS_INVALID_QUEUE_SIZE (0x0f01)
+#define MPI3_IOCSTATUS_INVALID_MSIX_VECTOR (0x0f02)
+#define MPI3_IOCSTATUS_INVALID_REPLY_QUEUE_ID (0x0f03)
+#define MPI3_IOCSTATUS_INVALID_QUEUE_DELETION (0x0f04)
+#define MPI3_IOCLOGINFO_TYPE_MASK (0xf0000000)
+#define MPI3_IOCLOGINFO_TYPE_SHIFT (28)
+#define MPI3_IOCLOGINFO_TYPE_NONE (0x0)
+#define MPI3_IOCLOGINFO_TYPE_SAS (0x3)
+#define MPI3_IOCLOGINFO_LOG_DATA_MASK (0x0fffffff)
+#endif
--
2.18.1
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature
