From: Peter Wang <peter.wang@xxxxxxxxxxxx>
As per specs, e.g, JESD220E chapter 7.2, while powering off
the ufs device, RST_N signal should be between VSS(Ground)
and VCCQ/VCCQ2. The power down sequence after fixing as below:
Power down:
1. Assert RST_N low
2. Turn-off VCC
3. Turn-off VCCQ/VCCQ2
Change-Id: I297e9afe3c22bb1a5fc5e7acce9b5ecfd20181ed
Signed-off-by: Peter Wang <peter.wang@xxxxxxxxxxxx>
---
drivers/scsi/ufs/ufs-mediatek.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/drivers/scsi/ufs/ufs-mediatek.c b/drivers/scsi/ufs/ufs-mediatek.c
index c55202b..47b4066 100644
--- a/drivers/scsi/ufs/ufs-mediatek.c
+++ b/drivers/scsi/ufs/ufs-mediatek.c
@@ -922,6 +922,7 @@ static void ufs_mtk_vreg_set_lpm(struct ufs_hba *hba, bool lpm)
static int ufs_mtk_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
{
int err;
+ struct arm_smccc_res res;
if (ufshcd_is_link_hibern8(hba)) {
err = ufs_mtk_link_set_lpm(hba);
@@ -941,6 +942,9 @@ static int ufs_mtk_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
goto fail;
}
+ if (ufshcd_is_link_off(hba))
+ ufs_mtk_device_reset_ctrl(0, res);
+
return 0;
fail:
/*
--
1.7.9.5
