On Wed, Mar 3, 2021 at 3:47 PM Lee Jones <lee.jones@xxxxxxxxxx> wrote: > > Fixes the following W=1 kernel build warning(s): > > drivers/scsi/pm8001/pm80xx_hwi.c:1427: warning: expecting prototype for pm8001_chip_init(). Prototype was for pm80xx_chip_init() instead > drivers/scsi/pm8001/pm80xx_hwi.c:1584: warning: expecting prototype for pm8001_chip_soft_rst(). Prototype was for pm80xx_chip_soft_rst() instead > drivers/scsi/pm8001/pm80xx_hwi.c:1711: warning: expecting prototype for pm8001_chip_interrupt_enable(). Prototype was for pm80xx_chip_intx_interrupt_enable() instead > drivers/scsi/pm8001/pm80xx_hwi.c:1722: warning: expecting prototype for pm8001_chip_intx_interrupt_disable(). Prototype was for pm80xx_chip_intx_interrupt_disable() instead > drivers/scsi/pm8001/pm80xx_hwi.c:1733: warning: expecting prototype for pm8001_chip_interrupt_enable(). Prototype was for pm80xx_chip_interrupt_enable() instead > drivers/scsi/pm8001/pm80xx_hwi.c:1752: warning: expecting prototype for pm8001_chip_interrupt_disable(). Prototype was for pm80xx_chip_interrupt_disable() instead > drivers/scsi/pm8001/pm80xx_hwi.c:4192: warning: expecting prototype for pm8001_chip_smp_req(). Prototype was for pm80xx_chip_smp_req() instead > drivers/scsi/pm8001/pm80xx_hwi.c:4775: warning: expecting prototype for pm8001_chip_phy_stop_req(). Prototype was for pm80xx_chip_phy_stop_req() instead > drivers/scsi/pm8001/pm80xx_hwi.c:4907: warning: expecting prototype for pm8001_chip_isr(). Prototype was for pm80xx_chip_isr() instead > > Cc: Jack Wang <jinpu.wang@xxxxxxxxxxxxxxx> > Cc: "James E.J. Bottomley" <jejb@xxxxxxxxxxxxx> > Cc: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx> > Cc: linux-scsi@xxxxxxxxxxxxxxx > Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx> Acked-by: Jack Wang <jinpu.wang@xxxxxxxxxxxxxxx> Thanks > --- > drivers/scsi/pm8001/pm80xx_hwi.c | 18 +++++++++--------- > 1 file changed, 9 insertions(+), 9 deletions(-) > > diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c > index 84315560e8e1a..74ed072209f47 100644 > --- a/drivers/scsi/pm8001/pm80xx_hwi.c > +++ b/drivers/scsi/pm8001/pm80xx_hwi.c > @@ -1420,7 +1420,7 @@ static int pm80xx_encrypt_update(struct pm8001_hba_info *pm8001_ha) > } > > /** > - * pm8001_chip_init - the main init function that initialize whole PM8001 chip. > + * pm80xx_chip_init - the main init function that initialize whole PM8001 chip. > * @pm8001_ha: our hba card information > */ > static int pm80xx_chip_init(struct pm8001_hba_info *pm8001_ha) > @@ -1574,7 +1574,7 @@ pm80xx_fatal_errors(struct pm8001_hba_info *pm8001_ha) > } > > /** > - * pm8001_chip_soft_rst - soft reset the PM8001 chip, so that the clear all > + * pm80xx_chip_soft_rst - soft reset the PM8001 chip, so that the clear all > * the FW register status to the originated status. > * @pm8001_ha: our hba card information > */ > @@ -1703,7 +1703,7 @@ static void pm80xx_hw_chip_rst(struct pm8001_hba_info *pm8001_ha) > } > > /** > - * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt > + * pm80xx_chip_intx_interrupt_enable - enable PM8001 chip interrupt > * @pm8001_ha: our hba card information > */ > static void > @@ -1714,7 +1714,7 @@ pm80xx_chip_intx_interrupt_enable(struct pm8001_hba_info *pm8001_ha) > } > > /** > - * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt > + * pm80xx_chip_intx_interrupt_disable - disable PM8001 chip interrupt > * @pm8001_ha: our hba card information > */ > static void > @@ -1724,7 +1724,7 @@ pm80xx_chip_intx_interrupt_disable(struct pm8001_hba_info *pm8001_ha) > } > > /** > - * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt > + * pm80xx_chip_interrupt_enable - enable PM8001 chip interrupt > * @pm8001_ha: our hba card information > * @vec: interrupt number to enable > */ > @@ -1743,7 +1743,7 @@ pm80xx_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec) > } > > /** > - * pm8001_chip_interrupt_disable- disable PM8001 chip interrupt > + * pm80xx_chip_interrupt_disable - disable PM8001 chip interrupt > * @pm8001_ha: our hba card information > * @vec: interrupt number to disable > */ > @@ -4183,7 +4183,7 @@ static void build_smp_cmd(u32 deviceID, __le32 hTag, > } > > /** > - * pm8001_chip_smp_req - send a SMP task to FW > + * pm80xx_chip_smp_req - send a SMP task to FW > * @pm8001_ha: our hba card information. > * @ccb: the ccb information this request used. > */ > @@ -4766,7 +4766,7 @@ pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id) > } > > /** > - * pm8001_chip_phy_stop_req - start phy via PHY_STOP COMMAND > + * pm80xx_chip_phy_stop_req - start phy via PHY_STOP COMMAND > * @pm8001_ha: our hba card information. > * @phy_id: the phy id which we wanted to start up. > */ > @@ -4898,7 +4898,7 @@ static u32 pm80xx_chip_is_our_interrupt(struct pm8001_hba_info *pm8001_ha) > } > > /** > - * pm8001_chip_isr - PM8001 isr handler. > + * pm80xx_chip_isr - PM8001 isr handler. > * @pm8001_ha: our hba card information. > * @vec: irq number. > */ > -- > 2.27.0 >
