Fixes the following W=1 kernel build warning(s): drivers/scsi/pm8001/pm80xx_hwi.c:1427: warning: expecting prototype for pm8001_chip_init(). Prototype was for pm80xx_chip_init() instead drivers/scsi/pm8001/pm80xx_hwi.c:1584: warning: expecting prototype for pm8001_chip_soft_rst(). Prototype was for pm80xx_chip_soft_rst() instead drivers/scsi/pm8001/pm80xx_hwi.c:1711: warning: expecting prototype for pm8001_chip_interrupt_enable(). Prototype was for pm80xx_chip_intx_interrupt_enable() instead drivers/scsi/pm8001/pm80xx_hwi.c:1722: warning: expecting prototype for pm8001_chip_intx_interrupt_disable(). Prototype was for pm80xx_chip_intx_interrupt_disable() instead drivers/scsi/pm8001/pm80xx_hwi.c:1733: warning: expecting prototype for pm8001_chip_interrupt_enable(). Prototype was for pm80xx_chip_interrupt_enable() instead drivers/scsi/pm8001/pm80xx_hwi.c:1752: warning: expecting prototype for pm8001_chip_interrupt_disable(). Prototype was for pm80xx_chip_interrupt_disable() instead drivers/scsi/pm8001/pm80xx_hwi.c:4192: warning: expecting prototype for pm8001_chip_smp_req(). Prototype was for pm80xx_chip_smp_req() instead drivers/scsi/pm8001/pm80xx_hwi.c:4775: warning: expecting prototype for pm8001_chip_phy_stop_req(). Prototype was for pm80xx_chip_phy_stop_req() instead drivers/scsi/pm8001/pm80xx_hwi.c:4907: warning: expecting prototype for pm8001_chip_isr(). Prototype was for pm80xx_chip_isr() instead Cc: Jack Wang <jinpu.wang@xxxxxxxxxxxxxxx> Cc: "James E.J. Bottomley" <jejb@xxxxxxxxxxxxx> Cc: "Martin K. Petersen" <martin.petersen@xxxxxxxxxx> Cc: linux-scsi@xxxxxxxxxxxxxxx Signed-off-by: Lee Jones <lee.jones@xxxxxxxxxx> --- drivers/scsi/pm8001/pm80xx_hwi.c | 18 +++++++++--------- 1 file changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/scsi/pm8001/pm80xx_hwi.c b/drivers/scsi/pm8001/pm80xx_hwi.c index 84315560e8e1a..74ed072209f47 100644 --- a/drivers/scsi/pm8001/pm80xx_hwi.c +++ b/drivers/scsi/pm8001/pm80xx_hwi.c @@ -1420,7 +1420,7 @@ static int pm80xx_encrypt_update(struct pm8001_hba_info *pm8001_ha) } /** - * pm8001_chip_init - the main init function that initialize whole PM8001 chip. + * pm80xx_chip_init - the main init function that initialize whole PM8001 chip. * @pm8001_ha: our hba card information */ static int pm80xx_chip_init(struct pm8001_hba_info *pm8001_ha) @@ -1574,7 +1574,7 @@ pm80xx_fatal_errors(struct pm8001_hba_info *pm8001_ha) } /** - * pm8001_chip_soft_rst - soft reset the PM8001 chip, so that the clear all + * pm80xx_chip_soft_rst - soft reset the PM8001 chip, so that the clear all * the FW register status to the originated status. * @pm8001_ha: our hba card information */ @@ -1703,7 +1703,7 @@ static void pm80xx_hw_chip_rst(struct pm8001_hba_info *pm8001_ha) } /** - * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt + * pm80xx_chip_intx_interrupt_enable - enable PM8001 chip interrupt * @pm8001_ha: our hba card information */ static void @@ -1714,7 +1714,7 @@ pm80xx_chip_intx_interrupt_enable(struct pm8001_hba_info *pm8001_ha) } /** - * pm8001_chip_intx_interrupt_disable- disable PM8001 chip interrupt + * pm80xx_chip_intx_interrupt_disable - disable PM8001 chip interrupt * @pm8001_ha: our hba card information */ static void @@ -1724,7 +1724,7 @@ pm80xx_chip_intx_interrupt_disable(struct pm8001_hba_info *pm8001_ha) } /** - * pm8001_chip_interrupt_enable - enable PM8001 chip interrupt + * pm80xx_chip_interrupt_enable - enable PM8001 chip interrupt * @pm8001_ha: our hba card information * @vec: interrupt number to enable */ @@ -1743,7 +1743,7 @@ pm80xx_chip_interrupt_enable(struct pm8001_hba_info *pm8001_ha, u8 vec) } /** - * pm8001_chip_interrupt_disable- disable PM8001 chip interrupt + * pm80xx_chip_interrupt_disable - disable PM8001 chip interrupt * @pm8001_ha: our hba card information * @vec: interrupt number to disable */ @@ -4183,7 +4183,7 @@ static void build_smp_cmd(u32 deviceID, __le32 hTag, } /** - * pm8001_chip_smp_req - send a SMP task to FW + * pm80xx_chip_smp_req - send a SMP task to FW * @pm8001_ha: our hba card information. * @ccb: the ccb information this request used. */ @@ -4766,7 +4766,7 @@ pm80xx_chip_phy_start_req(struct pm8001_hba_info *pm8001_ha, u8 phy_id) } /** - * pm8001_chip_phy_stop_req - start phy via PHY_STOP COMMAND + * pm80xx_chip_phy_stop_req - start phy via PHY_STOP COMMAND * @pm8001_ha: our hba card information. * @phy_id: the phy id which we wanted to start up. */ @@ -4898,7 +4898,7 @@ static u32 pm80xx_chip_is_our_interrupt(struct pm8001_hba_info *pm8001_ha) } /** - * pm8001_chip_isr - PM8001 isr handler. + * pm80xx_chip_isr - PM8001 isr handler. * @pm8001_ha: our hba card information. * @vec: irq number. */ -- 2.27.0
