thomas schorpp wrote:
James Bottomley wrote:
On Fri, 2007-03-23 at 17:28 +0100, thomas schorpp wrote:
i agree for this to be a 32bit dma busmaster chip,
since pci_resource_flags and lspci say 64bit mem resource type
aic7xxx: pci_resource_start fffff000 *maddr 20000 mem64 4
static int
ahc_linux_pci_reserve_mem_region(struct ahc_softc *ahc,
u_long *bus_addr,
uint8_t __iomem **maddr)
{
// u_long start;
u_long len;
int error;
uint64_t start;
...
printk(KERN_WARNING "aic7xxx: pci_resource_start 0x%llx mem64
0x%lx\n", start, pci_resource_flags(ahc->dev_softc, 1) &
PCI_BASE_ADDRESS_MEM_TYPE_64 ); //schorpp
return (error);
aic7xxx: pci_resource_start 0xffffff000 mem64 0x4
-----------------------------------------------^
just to doublecheck the situation, posted lspci already.
will check next, if
len = pci_resource_len(ahc->dev_softc, 1);
if (start != 0) {
*bus_addr = start;
// if (request_mem_region(start, 0x1000, "aic7xxx") == 0)
if (request_mem_region(start, len, "aic7xxx") == 0)
succeeds.
no. so the pci layer reports wrong start:
start = pci_resource_start(ahc->dev_softc, 1);
len = pci_resource_len(ahc->dev_softc, 1);
if (start != 0) {
*bus_addr = start;
// if (request_mem_region(start, 0x1000, "aic7xxx") == 0)
if (request_mem_region(start, len, "aic7xxx") == 0)
error = ENOMEM;
printk(KERN_WARNING "aic7xxx: req_mem_region 0x%x memlen 0x%lx \n", error, len ); //schorpp
tom1:~# dmesg |grep aic
aic7xxx: DMA_32BIT_MASK
aic7xxx: req_mem_region 0x0 memlen 0x1000
aic7xxx: pci_resource_start 0xffffff000 *maddr 0x20000 mem64 0x4
aic7xxx: PCI Device 0:6:0 failed memory mapped test. Using PIO.
aic7892: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs
we've a bug in the x86_64 linux pci config, BIOS is ok, the hardware
worked fine in a winxp_x64 test setup a few months ago.
will ask LKML.
y
tom
sorry, wrong according to http://download.adaptec.com/pdfs/aic7892.pdf.
"66 MHz, 64-bit, PCI interface that
supports zero wait-state memory;
also operates on 33 MHz, 32-bit
PCI busses"
this chip is capable of 64bit addressing, as pci_resource_nnnn
(checking this) on x86_64 platform and lspci on x86_64 *and* AMDK7
configured kernels reports, even on PCI/32, right?
or is it impossible to do multiplexed 64bit mem addressing on PCI/32?
It can only do 37 bit addressing ... only the aic79xx can do the full 64
bits, so I suspect it should never get a 64 bit BAR, since it wouldn't
be able to decode the full 32 bits. I can fix the mmio check not to
hang, but the card won't actually work mmio until whatever's assigning
the BAR above 32 bits is fixed (that could either be a kernel PCI bug or
a BIOS bug).
ok, i trust in that. adaptor bios and mainboard bios *are* out,
winxp_x64 driver handled all.
so agree on kernel pci hal issue.
but what for const uint64_t mask_39bit = 0x7FFFFFFFFFULL;
then?
can adaptec.inc pls comment? since the aha19160 card is still in
production state, i assume they want to have a linux x86_64 dma
capable driver. so far it is not, or can other users having this card
pls confirm my pci system broken?
James
y
tom
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
