[PATCH] scsi: megaraid_sas: Fix MEGASAS_IOC_FIRMWARE regression

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Arnd Bergmann <arnd@xxxxxxxx>

Phil Oester reported that a fix for a possible buffer overrun that I
sent caused a regression that manifests in this output:

 Event Message: A PCI parity error was detected on a component at bus 0 device 5 function 0.
 Severity: Critical
 Message ID: PCI1308

The original code tried to handle the sense data pointer differently
when using 32-bit 64-bit DMA addressing, which would lead to a 32-bit
dma_addr_t value of 0x11223344 to get stored

32-bit kernel:       44 33 22 11 ?? ?? ?? ??
64-bit LE kernel:    44 33 22 11 00 00 00 00
64-bit BE kernel:    00 00 00 00 44 33 22 11

or a 64-bit dma_addr_t value of 0x1122334455667788 to get stored as

32-bit kernel:       88 77 66 55 ?? ?? ?? ??
64-bit kernel:       88 77 66 55 44 33 22 11

In my patch, I tried to ensure that the same value is used on both
32-bit and 64-bit kernels, and picked what seemed to be the most sensible
combination, storing 32-bit addresses in the first four bytes (as 32-bit
kernels already did), and 64-bit addresses in eight consecutive bytes
(as 64-bit kernels already did), but evidently this was incorrect.

Always storing the dma_addr_t pointer as 64-bit little-endian,
i.e. initializing the second four bytes to zero in case of 32-bit
addressing, apparently solved the problem for Phil, and is consistent
with what all 64-bit little-endian machines did before.

I also checked in the history that in previous versions of the code,
the pointer was always in the first four bytes without padding, and that
previous attempts to fix 64-bit user space, big-endian architectures
and 64-bit DMA were clearly flawed and seem to have introduced made
this worse.

Reported-by: Phil Oester <kernel@xxxxxxxxxxxx>
Fixes: 381d34e376e3 ("scsi: megaraid_sas: Check user-provided offsets")
Fixes: 107a60dd71b5 ("scsi: megaraid_sas: Add support for 64bit consistent DMA")
Fixes: 94cd65ddf4d7 ("[SCSI] megaraid_sas: addded support for big endian architecture")
Fixes: 7b2519afa1ab ("[SCSI] megaraid_sas: fix 64 bit sense pointer truncation")
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
 drivers/scsi/megaraid/megaraid_sas_base.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 6e4bf05c6d77..3b574c453414 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -8205,11 +8205,9 @@ megasas_mgmt_fw_ioctl(struct megasas_instance *instance,
 			goto out;
 		}
 
+		/* always store 64 bits regardless of addressing */
 		sense_ptr = (void *)cmd->frame + ioc->sense_off;
-		if (instance->consistent_mask_64bit)
-			put_unaligned_le64(sense_handle, sense_ptr);
-		else
-			put_unaligned_le32(sense_handle, sense_ptr);
+		put_unaligned_le64(sense_handle, sense_ptr);
 	}
 
 	/*
-- 
2.29.2




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux