[Patch 1/2] cciss: fix for 2TB support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Patch 1/2

This patch changes the way we determine if a logical volume is larger than 2TB. The
original test looked for a total_size of 0. Originally we added 1 to the total_size.
That would make our read_capacity return size 0 for >2TB lv's. We assumed that we
could not have a lv size of 0 so it seemed OK until we were in a clustered system. The
backup node would see a size of 0 due to the reservation on the drive. That caused
the driver to switch to 16-byte CDB's which are not supported on older controllers.
After that everything was broken.
It may seem petty but I don't see the value in trying to determine if the LBA is
beyond the 2TB boundary. That's why when we switch we use 16-byte CDB's for all
read/write operations.
Please consider this for inclusion.

Signed-off-by: Mike Miller <mike.miller@xxxxxx>
------------------------------------------------------------------------------------------
diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 05dfe35..916aab0 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -1291,13 +1291,19 @@ static void cciss_update_drive_info(int 
 	if (inq_buff == NULL)
 		goto mem_msg;
 
+ 	/* testing to see if 16-byte CDBs are already being used */
+ 	if (h->cciss_read == CCISS_READ_16) {
+ 		cciss_read_capacity_16(h->ctlr, drv_index, 1,
+ 			&total_size, &block_size);
+ 		goto geo_inq;
+ 	}
+  
 	cciss_read_capacity(ctlr, drv_index, 1,
 			    &total_size, &block_size);
 
-	/* total size = last LBA + 1 */
-	/* FFFFFFFF + 1 = 0, cannot have a logical volume of size 0 */
-	/* so we assume this volume this must be >2TB in size */
-	if (total_size == (__u32) 0) {
+  	/* if read_capacity returns all F's this volume is >2TB in size */
+  	/* so we switch to 16-byte CDB's for all read/write ops */
+  	if (total_size == 0xFFFFFFFF) {
 		cciss_read_capacity_16(ctlr, drv_index, 1,
 		&total_size, &block_size);
 		h->cciss_read = CCISS_READ_16;
@@ -1306,6 +1312,7 @@ static void cciss_update_drive_info(int 
 		h->cciss_read = CCISS_READ_10;
 		h->cciss_write = CCISS_WRITE_10;
 	}
+geo_inq:
 	cciss_geometry_inquiry(ctlr, drv_index, 1, total_size, block_size,
 			       inq_buff, &h->drv[drv_index]);
 
@@ -1917,13 +1924,14 @@ static void cciss_geometry_inquiry(int c
 			drv->raid_level = inq_buff->data_byte[8];
 		}
 		drv->block_size = block_size;
-		drv->nr_blocks = total_size;
+		drv->nr_blocks = total_size + 1;
 		t = drv->heads * drv->sectors;
 		if (t > 1) {
-			unsigned rem = sector_div(total_size, t);
+			sector_t real_size = total_size + 1;
+			unsigned long rem = sector_div(real_size, t);
 			if (rem)
-				total_size++;
-			drv->cylinders = total_size;
+				real_size++;
+			drv->cylinders = real_size;
 		}
 	} else {		/* Get geometry failed */
 		printk(KERN_WARNING "cciss: reading geometry failed\n");
@@ -1953,16 +1961,16 @@ cciss_read_capacity(int ctlr, int logvol
 				ctlr, buf, sizeof(ReadCapdata_struct),
 					1, logvol, 0, NULL, TYPE_CMD);
 	if (return_code == IO_OK) {
-		*total_size = be32_to_cpu(*(__u32 *) buf->total_size)+1;
+		*total_size = be32_to_cpu(*(__u32 *) buf->total_size);
 		*block_size = be32_to_cpu(*(__u32 *) buf->block_size);
 	} else {		/* read capacity command failed */
 		printk(KERN_WARNING "cciss: read capacity failed\n");
 		*total_size = 0;
 		*block_size = BLOCK_SIZE;
 	}
-	if (*total_size != (__u32) 0)
+	if (*total_size != 0)
 		printk(KERN_INFO "      blocks= %llu block_size= %d\n",
-		(unsigned long long)*total_size, *block_size);
+		(unsigned long long)*total_size+1, *block_size);
 	kfree(buf);
 	return;
 }
@@ -1989,7 +1997,7 @@ cciss_read_capacity_16(int ctlr, int log
 				1, logvol, 0, NULL, TYPE_CMD);
 	}
 	if (return_code == IO_OK) {
-		*total_size = be64_to_cpu(*(__u64 *) buf->total_size)+1;
+		*total_size = be64_to_cpu(*(__u64 *) buf->total_size);
 		*block_size = be32_to_cpu(*(__u32 *) buf->block_size);
 	} else {		/* read capacity command failed */
 		printk(KERN_WARNING "cciss: read capacity failed\n");
@@ -1997,7 +2005,7 @@ cciss_read_capacity_16(int ctlr, int log
 		*block_size = BLOCK_SIZE;
 	}
 	printk(KERN_INFO "      blocks= %llu block_size= %d\n",
-	       (unsigned long long)*total_size, *block_size);
+	       (unsigned long long)*total_size+1, *block_size);
 	kfree(buf);
 	return;
 }
@@ -3119,8 +3127,9 @@ #endif				/* CCISS_DEBUG */
 		}
 		cciss_read_capacity(cntl_num, i, 0, &total_size, &block_size);
 
-		/* total_size = last LBA + 1 */
-		if(total_size == (__u32) 0) {
+		/* If read_capacity returns all F's the logical is >2TB */
+		/* so we switch to 16-byte CDBs for all read/write ops */
+		if(total_size == 0xFFFFFFFF) {
 			cciss_read_capacity_16(cntl_num, i, 0,
 			&total_size, &block_size);
 			hba[cntl_num]->cciss_read = CCISS_READ_16;
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux