[PATCH 3/7] qla2xxx: Fix MPI reset needed message

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Arun Easi <aeasi@xxxxxxxxxxx>

When printing the message:
"MPI Heartbeat stop. MPI reset is not needed.."

..the wrong register was checked leading to always printing that MPI reset
is not needed, even when it is needed.
Fix the MPI reset message.

Signed-off-by: Arun Easi <aeasi@xxxxxxxxxxx>
Signed-off-by: Nilesh Javali <njavali@xxxxxxxxxxx>
---
 drivers/scsi/qla2xxx/qla_isr.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index bb3beaa77d39..27c2a89bd2ff 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -767,7 +767,7 @@ qla27xx_handle_8200_aen(scsi_qla_host_t *vha, uint16_t *mb)
 	ql_log(ql_log_warn, vha, 0x02f0,
 	       "MPI Heartbeat stop. MPI reset is%s needed. "
 	       "MB0[%xh] MB1[%xh] MB2[%xh] MB3[%xh]\n",
-	       mb[0] & BIT_8 ? "" : " not",
+	       mb[1] & BIT_8 ? "" : " not",
 	       mb[0], mb[1], mb[2], mb[3]);
 
 	if ((mb[1] & BIT_8) == 0)
-- 
2.19.0.rc0




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux