Re: [PATCH] scsi: Update Aic94xx SAS/SATA Linux open source devicedriver for new sequence firmware.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Wu, Gilbert wrote:
> Hi James,
> 
>   We are investigating this issue here. We will update the status when
> we can duplicate the problem here and root cause.

FWIW,

v17 looks good for both SAS/SATA load testing.  The 24-disk x260 seems
to have crapped out after about 800 rounds of load/unload due to the
phys reporting devices, then no devices about 10s later, and then having
the module unloaded before the dead SAS commands finished returning.
Not sure what that's about, though I might also have borked the x260 :(

Though who really is going to reboot the machine 800 times in rapid-fire
succession???

(I'm not trying to slam the v28 sequencer, I'm merely providing a
baseline for comparison between the two.  It may very well be the case
that all the bugs we used to observe with v17 were merely a result of us
poking the sequencer the wrong way....)

--D
-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux