Hi James, We are investigating this issue here. We will update the status when we can duplicate the problem here and root cause. Thanks! Gilbert -----Original Message----- From: James Bottomley [mailto:James.Bottomley@xxxxxxxxxxxx] Sent: Saturday, February 03, 2007 2:29 PM To: Wu, Gilbert Cc: linux-scsi@xxxxxxxxxxxxxxx Subject: Re: [PATCH] scsi: Update Aic94xx SAS/SATA Linux open source devicedriver for new sequence firmware. On Tue, 2007-01-30 at 15:31 -0800, Wu, Gilbert wrote: > Subject: [PATCH] scsi: Update Aic94xx SAS/SATA Linux open source device > driver for new sequence firmware. I put the patch, which seems fine, into scsi-misc-2.6; however, it looks like the firmware isn't fine. With the V28 firmware I get instability on my directly attached SATA disk. It begins about three minutes into a small exercise of the filesystem on the disk as: Feb 3 16:13:50 localhost kernel: sas: command 0xf7aca994, task 0x00000000, gone: EH_RESET_TIMER and then times out commands and eventually flips ext3 into read only mode because of the errors. If I run the same tests with the V17/10c6 firmware, everything runs fine and to completion. James - To unsubscribe from this list: send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
