[PATCH net] qed: Disable "MFW indication via attention" SPAM every 5 minutes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is likely firmware causing this but its starting to annoy customers.
Change the message level to verbose to prevent the spam.
Note that this seems to only show up with ISCSI enabled on the HBA via the 
qedi driver.

Signed-off-by: Laurence Oberman <loberman@xxxxxxxxxx>
---
 drivers/net/ethernet/qlogic/qed/qed_int.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/net/ethernet/qlogic/qed/qed_int.c b/drivers/net/ethernet/qlogic/qed/qed_int.c
index b7b974f..d853eb9 100644
--- a/drivers/net/ethernet/qlogic/qed/qed_int.c
+++ b/drivers/net/ethernet/qlogic/qed/qed_int.c
@@ -1193,7 +1193,8 @@ static int qed_int_attentions(struct qed_hwfn *p_hwfn)
 			index, attn_bits, attn_acks, asserted_bits,
 			deasserted_bits, p_sb_attn_sw->known_attn);
 	} else if (asserted_bits == 0x100) {
-		DP_INFO(p_hwfn, "MFW indication via attention\n");
+		DP_VERBOSE(p_hwfn, NETIF_MSG_INTR,
+			   "MFW indication via attention\n");
 	} else {
 		DP_VERBOSE(p_hwfn, NETIF_MSG_INTR,
 			   "MFW indication [deassertion]\n");
-- 
1.8.3.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux