The driver is allowing the user to change lpfc_enable_bg while
loading the driver against a FCoE adapter. This is not supported.
No check is made for the adapter type when applying the blockguard
enablement value.
Fix by verifying the adapter type before setting the enablement flag.
Signed-off-by: Dick Kennedy <dick.kennedy@xxxxxxxxxxxx>
Signed-off-by: James Smart <jsmart2021@xxxxxxxxx>
---
drivers/scsi/lpfc/lpfc_attr.c | 27 ++++++++++++++++++++++++++-
1 file changed, 26 insertions(+), 1 deletion(-)
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 7ac6508b7ed8..63e631f116e4 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -7080,6 +7080,21 @@ struct fc_function_template lpfc_vport_transport_functions = {
};
/**
+ * lpfc_get_hba_function_mode - Used to determine the HBA function in FCoE
+ * Mode
+ * @phba: lpfc_hba pointer.
+ **/
+static void
+lpfc_get_hba_function_mode(struct lpfc_hba *phba)
+{
+ /* If it's a SkyHawk FCoE adapter */
+ if (phba->pcidev->device == PCI_DEVICE_ID_SKYHAWK)
+ phba->hba_flag |= HBA_FCOE_MODE;
+ else
+ phba->hba_flag &= ~HBA_FCOE_MODE;
+}
+
+/**
* lpfc_get_cfgparam - Used during probe_one to init the adapter structure
* @phba: lpfc_hba pointer.
**/
@@ -7135,8 +7150,18 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
else
phba->cfg_poll = lpfc_poll;
- if (phba->cfg_enable_bg)
+ /* Get the function mode */
+ lpfc_get_hba_function_mode(phba);
+
+ /* BlockGuard allowed for FC only. */
+ if (phba->cfg_enable_bg && phba->hba_flag & HBA_FCOE_MODE) {
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0581 BlockGuard feature not supported\n");
+ /* If set, clear the BlockGuard support param */
+ phba->cfg_enable_bg = 0;
+ } else if (phba->cfg_enable_bg) {
phba->sli3_options |= LPFC_SLI3_BG_ENABLED;
+ }
lpfc_suppress_rsp_init(phba, lpfc_suppress_rsp);
--
2.13.7
