modinfo for lpfc_nvme_enable_fb is incorrect. FirstBurst on lpfc target is not fully supported. Update the attribute description Signed-off-by: Dick Kennedy <dick.kennedy@xxxxxxxxxxxx> Signed-off-by: James Smart <jsmart2021@xxxxxxxxx> --- drivers/scsi/lpfc/lpfc_attr.c | 9 +++------ 1 file changed, 3 insertions(+), 6 deletions(-) diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c index 63e631f116e4..a851bf557dba 100644 --- a/drivers/scsi/lpfc/lpfc_attr.c +++ b/drivers/scsi/lpfc/lpfc_attr.c @@ -5467,15 +5467,12 @@ LPFC_ATTR_RW(nvmet_fb_size, 0, 0, 65536, * lpfc_nvme_enable_fb: Enable NVME first burst on I and T functions. * For the Initiator (I), enabling this parameter means that an NVMET * PRLI response with FBA enabled and an FB_SIZE set to a nonzero value will be - * processed by the initiator for subsequent NVME FCP IO. For the target - * function (T), enabling this parameter qualifies the lpfc_nvmet_fb_size - * driver parameter as the target function's first burst size returned to the - * initiator in the target's NVME PRLI response. Parameter supported on physical - * port only - no NPIV support. + * processed by the initiator for subsequent NVME FCP IO. + * Currently, this feature is not supported on the NVME target * Value range is [0,1]. Default value is 0 (disabled). */ LPFC_ATTR_RW(nvme_enable_fb, 0, 0, 1, - "Enable First Burst feature on I and T functions."); + "Enable First Burst feature for NVME Initiator."); /* # lpfc_max_scsicmpl_time: Use scsi command completion time to control I/O queue -- 2.13.7
