Move user interface part of scsi/sg.h into the new header file: include/uapi/scsi/sg.h . Since scsi/sg.h includes the new header, other code including scsi/sg.h should not be impacted. Signed-off-by: Douglas Gilbert <dgilbert@xxxxxxxxxxxx> --- include/scsi/sg.h | 268 ++------------------------------- include/uapi/scsi/sg.h | 329 +++++++++++++++++++++++++++++++++++++++++ 2 files changed, 338 insertions(+), 259 deletions(-) create mode 100644 include/uapi/scsi/sg.h diff --git a/include/scsi/sg.h b/include/scsi/sg.h index f91bcca604e4..46fc7cbffd78 100644 --- a/include/scsi/sg.h +++ b/include/scsi/sg.h @@ -4,271 +4,21 @@ #include <linux/compiler.h> -/* - * History: - * Started: Aug 9 by Lawrence Foard (entropy@xxxxxxxxxxxxx), to allow user - * process control of SCSI devices. - * Development Sponsored by Killy Corp. NY NY - * - * Original driver (sg.h): - * Copyright (C) 1992 Lawrence Foard - * Version 2 and 3 extensions to driver: - * Copyright (C) 1998 - 2014 Douglas Gilbert - * - * Version: 3.5.36 (20140603) - * This version is for 2.6 and 3 series kernels. - * - * Documentation - * ============= - * A web site for the SG device driver can be found at: - * http://sg.danny.cz/sg [alternatively check the MAINTAINERS file] - * The documentation for the sg version 3 driver can be found at: - * http://sg.danny.cz/sg/p/sg_v3_ho.html - * Also see: <kernel_source>/Documentation/scsi/scsi-generic.txt - * - * For utility and test programs see: http://sg.danny.cz/sg/sg3_utils.html - */ - #ifdef __KERNEL__ extern int sg_big_buff; /* for sysctl */ #endif +/* + * In version 3.9.01 of the sg driver, this file was spilt in two, with the + * bulk of the user space interface being placed in the file being included + * in the following line. + */ +#include <uapi/scsi/sg.h> -typedef struct sg_iovec /* same structure as used by readv() Linux system */ -{ /* call. It defines one scatter-gather element. */ - void __user *iov_base; /* Starting address */ - size_t iov_len; /* Length in bytes */ -} sg_iovec_t; - - -typedef struct sg_io_hdr -{ - int interface_id; /* [i] 'S' for SCSI generic (required) */ - int dxfer_direction; /* [i] data transfer direction */ - unsigned char cmd_len; /* [i] SCSI command length */ - unsigned char mx_sb_len; /* [i] max length to write to sbp */ - unsigned short iovec_count; /* [i] 0 implies no scatter gather */ - unsigned int dxfer_len; /* [i] byte count of data transfer */ - void __user *dxferp; /* [i], [*io] points to data transfer memory - or scatter gather list */ - unsigned char __user *cmdp; /* [i], [*i] points to command to perform */ - void __user *sbp; /* [i], [*o] points to sense_buffer memory */ - unsigned int timeout; /* [i] MAX_UINT->no timeout (unit: millisec) */ - unsigned int flags; /* [i] 0 -> default, see SG_FLAG... */ - int pack_id; /* [i->o] unused internally (normally) */ - void __user * usr_ptr; /* [i->o] unused internally */ - unsigned char status; /* [o] scsi status */ - unsigned char masked_status;/* [o] shifted, masked scsi status */ - unsigned char msg_status; /* [o] messaging level data (optional) */ - unsigned char sb_len_wr; /* [o] byte count actually written to sbp */ - unsigned short host_status; /* [o] errors from host adapter */ - unsigned short driver_status;/* [o] errors from software driver */ - int resid; /* [o] dxfer_len - actual_transferred */ - unsigned int duration; /* [o] time taken by cmd (unit: millisec) */ - unsigned int info; /* [o] auxiliary information */ -} sg_io_hdr_t; /* 64 bytes long (on i386) */ - -#define SG_INTERFACE_ID_ORIG 'S' - -/* Use negative values to flag difference from original sg_header structure */ -#define SG_DXFER_NONE (-1) /* e.g. a SCSI Test Unit Ready command */ -#define SG_DXFER_TO_DEV (-2) /* e.g. a SCSI WRITE command */ -#define SG_DXFER_FROM_DEV (-3) /* e.g. a SCSI READ command */ -#define SG_DXFER_TO_FROM_DEV (-4) /* treated like SG_DXFER_FROM_DEV with the - additional property than during indirect - IO the user buffer is copied into the - kernel buffers before the transfer */ -#define SG_DXFER_UNKNOWN (-5) /* Unknown data direction */ - -/* following flag values can be "or"-ed together */ -#define SG_FLAG_DIRECT_IO 1 /* default is indirect IO */ -#define SG_FLAG_UNUSED_LUN_INHIBIT 2 /* default is overwrite lun in SCSI */ - /* command block (when <= SCSI_2) */ -#define SG_FLAG_MMAP_IO 4 /* request memory mapped IO */ -#define SG_FLAG_NO_DXFER 0x10000 /* no transfer of kernel buffers to/from */ - /* user space (debug indirect IO) */ -/* defaults:: for sg driver: Q_AT_HEAD; for block layer: Q_AT_TAIL */ -#define SG_FLAG_Q_AT_TAIL 0x10 -#define SG_FLAG_Q_AT_HEAD 0x20 - -/* following 'info' values are "or"-ed together */ -#define SG_INFO_OK_MASK 0x1 -#define SG_INFO_OK 0x0 /* no sense, host nor driver "noise" */ -#define SG_INFO_CHECK 0x1 /* something abnormal happened */ - -#define SG_INFO_DIRECT_IO_MASK 0x6 -#define SG_INFO_INDIRECT_IO 0x0 /* data xfer via kernel buffers (or no xfer) */ -#define SG_INFO_DIRECT_IO 0x2 /* direct IO requested and performed */ -#define SG_INFO_MIXED_IO 0x4 /* part direct, part indirect IO */ - - -typedef struct sg_scsi_id { /* used by SG_GET_SCSI_ID ioctl() */ - int host_no; /* as in "scsi<n>" where 'n' is one of 0, 1, 2 etc */ - int channel; - int scsi_id; /* scsi id of target device */ - int lun; - int scsi_type; /* TYPE_... defined in scsi/scsi.h */ - short h_cmd_per_lun;/* host (adapter) maximum commands per lun */ - short d_queue_depth;/* device (or adapter) maximum queue length */ - int unused[2]; /* probably find a good use, set 0 for now */ -} sg_scsi_id_t; /* 32 bytes long on i386 */ - -typedef struct sg_req_info { /* used by SG_GET_REQUEST_TABLE ioctl() */ - char req_state; /* 0 -> not used, 1 -> written, 2 -> ready to read */ - char orphan; /* 0 -> normal request, 1 -> from interruped SG_IO */ - char sg_io_owned; /* 0 -> complete with read(), 1 -> owned by SG_IO */ - char problem; /* 0 -> no problem detected, 1 -> error to report */ - int pack_id; /* pack_id associated with request */ - void __user *usr_ptr; /* user provided pointer (in new interface) */ - unsigned int duration; /* millisecs elapsed since written (req_state==1) - or request duration (req_state==2) */ - int unused; -} sg_req_info_t; /* 20 bytes long on i386 */ - - -/* IOCTLs: Those ioctls that are relevant to the SG 3.x drivers follow. - [Those that only apply to the SG 2.x drivers are at the end of the file.] - (_GET_s yield result via 'int *' 3rd argument unless otherwise indicated) */ - -#define SG_EMULATED_HOST 0x2203 /* true for emulated host adapter (ATAPI) */ - -/* Used to configure SCSI command transformation layer for ATAPI devices */ -/* Only supported by the ide-scsi driver */ -#define SG_SET_TRANSFORM 0x2204 /* N.B. 3rd arg is not pointer but value: */ - /* 3rd arg = 0 to disable transform, 1 to enable it */ -#define SG_GET_TRANSFORM 0x2205 - -#define SG_SET_RESERVED_SIZE 0x2275 /* request a new reserved buffer size */ -#define SG_GET_RESERVED_SIZE 0x2272 /* actual size of reserved buffer */ - -/* The following ioctl has a 'sg_scsi_id_t *' object as its 3rd argument. */ -#define SG_GET_SCSI_ID 0x2276 /* Yields fd's bus, chan, dev, lun + type */ -/* SCSI id information can also be obtained from SCSI_IOCTL_GET_IDLUN */ - -/* Override host setting and always DMA using low memory ( <16MB on i386) */ -#define SG_SET_FORCE_LOW_DMA 0x2279 /* 0-> use adapter setting, 1-> force */ -#define SG_GET_LOW_DMA 0x227a /* 0-> use all ram for dma; 1-> low dma ram */ - -/* When SG_SET_FORCE_PACK_ID set to 1, pack_id is input to read() which - tries to fetch a packet with a matching pack_id, waits, or returns EAGAIN. - If pack_id is -1 then read oldest waiting. When ...FORCE_PACK_ID set to 0 - then pack_id ignored by read() and oldest readable fetched. */ -#define SG_SET_FORCE_PACK_ID 0x227b -#define SG_GET_PACK_ID 0x227c /* Yields oldest readable pack_id (or -1) */ - -#define SG_GET_NUM_WAITING 0x227d /* Number of commands awaiting read() */ - -/* Yields max scatter gather tablesize allowed by current host adapter */ -#define SG_GET_SG_TABLESIZE 0x227F /* 0 implies can't do scatter gather */ - -#define SG_GET_VERSION_NUM 0x2282 /* Example: version 2.1.34 yields 20134 */ - -/* Returns -EBUSY if occupied. 3rd argument pointer to int (see next) */ -#define SG_SCSI_RESET 0x2284 -/* Associated values that can be given to SG_SCSI_RESET follow. - * SG_SCSI_RESET_NO_ESCALATE may be OR-ed to the _DEVICE, _TARGET, _BUS - * or _HOST reset value so only that action is attempted. */ -#define SG_SCSI_RESET_NOTHING 0 -#define SG_SCSI_RESET_DEVICE 1 -#define SG_SCSI_RESET_BUS 2 -#define SG_SCSI_RESET_HOST 3 -#define SG_SCSI_RESET_TARGET 4 -#define SG_SCSI_RESET_NO_ESCALATE 0x100 - -/* synchronous SCSI command ioctl, (only in version 3 interface) */ -#define SG_IO 0x2285 /* similar effect as write() followed by read() */ - -#define SG_GET_REQUEST_TABLE 0x2286 /* yields table of active requests */ - -/* How to treat EINTR during SG_IO ioctl(), only in SG 3.x series */ -#define SG_SET_KEEP_ORPHAN 0x2287 /* 1 -> hold for read(), 0 -> drop (def) */ -#define SG_GET_KEEP_ORPHAN 0x2288 - -/* yields scsi midlevel's access_count for this SCSI device */ -#define SG_GET_ACCESS_COUNT 0x2289 - - -#define SG_SCATTER_SZ (8 * 4096) -/* Largest size (in bytes) a single scatter-gather list element can have. - The value used by the driver is 'max(SG_SCATTER_SZ, PAGE_SIZE)'. - This value should be a power of 2 (and may be rounded up internally). - If scatter-gather is not supported by adapter then this value is the - largest data block that can be read/written by a single scsi command. */ - -#define SG_DEFAULT_RETRIES 0 - -/* Defaults, commented if they differ from original sg driver */ -#define SG_DEF_FORCE_PACK_ID 0 -#define SG_DEF_KEEP_ORPHAN 0 -#define SG_DEF_RESERVED_SIZE SG_SCATTER_SZ /* load time option */ - -/* maximum outstanding requests, write() yields EDOM if exceeded */ -#define SG_MAX_QUEUE 16 - -#define SG_BIG_BUFF SG_DEF_RESERVED_SIZE /* for backward compatibility */ - -/* Alternate style type names, "..._t" variants preferred */ -typedef struct sg_io_hdr Sg_io_hdr; -typedef struct sg_io_vec Sg_io_vec; -typedef struct sg_scsi_id Sg_scsi_id; -typedef struct sg_req_info Sg_req_info; - - -/* vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv */ -/* The older SG interface based on the 'sg_header' structure follows. */ -/* ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ */ - -#define SG_MAX_SENSE 16 /* this only applies to the sg_header interface */ - -struct sg_header -{ - int pack_len; /* [o] reply_len (ie useless), ignored as input */ - int reply_len; /* [i] max length of expected reply (inc. sg_header) */ - int pack_id; /* [io] id number of packet (use ints >= 0) */ - int result; /* [o] 0==ok, else (+ve) Unix errno (best ignored) */ - unsigned int twelve_byte:1; - /* [i] Force 12 byte command length for group 6 & 7 commands */ - unsigned int target_status:5; /* [o] scsi status from target */ - unsigned int host_status:8; /* [o] host status (see "DID" codes) */ - unsigned int driver_status:8; /* [o] driver status+suggestion */ - unsigned int other_flags:10; /* unused */ - unsigned char sense_buffer[SG_MAX_SENSE]; /* [o] Output in 3 cases: - when target_status is CHECK_CONDITION or - when target_status is COMMAND_TERMINATED or - when (driver_status & DRIVER_SENSE) is true. */ -}; /* This structure is 36 bytes long on i386 */ - - -/* IOCTLs: The following are not required (or ignored) when the sg_io_hdr_t - interface is used. They are kept for backward compatibility with - the original and version 2 drivers. */ - -#define SG_SET_TIMEOUT 0x2201 /* unit: jiffies (10ms on i386) */ -#define SG_GET_TIMEOUT 0x2202 /* yield timeout as _return_ value */ - -/* Get/set command queuing state per fd (default is SG_DEF_COMMAND_Q. - Each time a sg_io_hdr_t object is seen on this file descriptor, this - command queuing flag is set on (overriding the previous setting). */ -#define SG_GET_COMMAND_Q 0x2270 /* Yields 0 (queuing off) or 1 (on) */ -#define SG_SET_COMMAND_Q 0x2271 /* Change queuing state with 0 or 1 */ - -/* Turn on/off error sense trace (1 and 0 respectively, default is off). - Try using: "# cat /proc/scsi/sg/debug" instead in the v3 driver */ -#define SG_SET_DEBUG 0x227e /* 0 -> turn off debug */ - -#define SG_NEXT_CMD_LEN 0x2283 /* override SCSI command length with given - number on the next write() on this file descriptor */ - - -/* Defaults, commented if they differ from original sg driver */ #ifdef __KERNEL__ -#define SG_DEFAULT_TIMEOUT_USER (60*USER_HZ) /* HZ == 'jiffies in 1 second' */ -#else -#define SG_DEFAULT_TIMEOUT (60*HZ) /* HZ == 'jiffies in 1 second' */ +#define SG_DEFAULT_TIMEOUT_USER (60*USER_HZ) /* HZ == 'jiffies in 1 second' */ #endif -#define SG_DEF_COMMAND_Q 0 /* command queuing is always on when - the new interface is used */ -#define SG_DEF_UNDERRUN_FLAG 0 +#undef SG_DEFAULT_TIMEOUT /* because of conflicting define in sg.c */ -#endif +#endif /* end of ifndef _SCSI_GENERIC_H guard */ diff --git a/include/uapi/scsi/sg.h b/include/uapi/scsi/sg.h new file mode 100644 index 000000000000..bb1be50d7b01 --- /dev/null +++ b/include/uapi/scsi/sg.h @@ -0,0 +1,329 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +#ifndef _UAPI_SCSI_SG_H +#define _UAPI_SCSI_SG_H + +/* + * History: + * Started: Aug 9 by Lawrence Foard (entropy@xxxxxxxxxxxxx), to allow user + * process control of SCSI devices. + * Development Sponsored by Killy Corp. NY NY + * + * Original driver (sg.h): + * Copyright (C) 1992 Lawrence Foard + * + * Later extensions (versions 2, 3 and 4) to driver: + * Copyright (C) 1998 - 2018 Douglas Gilbert + * + * Version 4.0.11 (20190502) + * This version is for Linux 4 and 5 series kernels. + * + * Documentation + * ============= + * A web site for the SG device driver can be found at: + * http://sg.danny.cz/sg [alternatively check the MAINTAINERS file] + * The documentation for the sg version 3 driver can be found at: + * http://sg.danny.cz/sg/p/sg_v3_ho.html + * Also see: <kernel_source>/Documentation/scsi/scsi-generic.txt + * + * For utility and test programs see: http://sg.danny.cz/sg/sg3_utils.html + */ + +#include <linux/types.h> +#include <linux/major.h> + +/* bsg.h contains the sg v4 user space interface structure (sg_io_v4). */ +#include <linux/bsg.h> + +/* + * Same structure as used by readv() call. It defines one scatter-gather + * element. "Scatter-gather" is abbreviated to "sgat" in this driver to + * avoid confusion with this driver's name. + */ +typedef struct sg_iovec { + void __user *iov_base; /* Starting address (of a byte) */ + size_t iov_len; /* Length in bytes */ +} sg_iovec_t; + + +typedef struct sg_io_hdr { + int interface_id; /* [i] 'S' for SCSI generic (required) */ + int dxfer_direction; /* [i] data transfer direction */ + unsigned char cmd_len; /* [i] SCSI command length */ + unsigned char mx_sb_len;/* [i] max length to write to sbp */ + unsigned short iovec_count; /* [i] 0 implies no sgat list */ + unsigned int dxfer_len; /* [i] byte count of data transfer */ + /* dxferp points to data transfer memory or scatter gather list */ + void __user *dxferp; /* [i], [*io] */ + unsigned char __user *cmdp;/* [i], [*i] points to command to perform */ + void __user *sbp; /* [i], [*o] points to sense_buffer memory */ + unsigned int timeout; /* [i] MAX_UINT->no timeout (unit: millisec) */ + unsigned int flags; /* [i] 0 -> default, see SG_FLAG... */ + int pack_id; /* [i->o] unused internally (normally) */ + void __user *usr_ptr; /* [i->o] unused internally */ + unsigned char status; /* [o] scsi status */ + unsigned char masked_status;/* [o] shifted, masked scsi status */ + unsigned char msg_status;/* [o] messaging level data (optional) */ + unsigned char sb_len_wr; /* [o] byte count actually written to sbp */ + unsigned short host_status; /* [o] errors from host adapter */ + unsigned short driver_status;/* [o] errors from software driver */ + int resid; /* [o] dxfer_len - actual_transferred */ + /* unit may be nanoseconds after SG_SET_GET_EXTENDED ioctl use */ + unsigned int duration; /* [o] time taken by cmd (unit: millisec) */ + unsigned int info; /* [o] auxiliary information */ +} sg_io_hdr_t; + +#define SG_INTERFACE_ID_ORIG 'S' + +/* Use negative values to flag difference from original sg_header structure */ +#define SG_DXFER_NONE (-1) /* e.g. a SCSI Test Unit Ready command */ +#define SG_DXFER_TO_DEV (-2) /* data-out buffer e.g. SCSI WRITE command */ +#define SG_DXFER_FROM_DEV (-3) /* data-in buffer e.g. SCSI READ command */ +/* + * SG_DXFER_TO_FROM_DEV is treated like SG_DXFER_FROM_DEV with the additional + * property than during indirect IO the user buffer is copied into the kernel + * buffers _before_ the transfer from the device takes place. Useful if short + * DMA transfers (less than requested) are not reported (e.g. resid always 0). + */ +#define SG_DXFER_TO_FROM_DEV (-4) +#define SG_DXFER_UNKNOWN (-5) /* Unknown data direction, do not use */ + +/* following flag values can be OR-ed together in v3::flags or v4::flags */ +#define SG_FLAG_DIRECT_IO 1 /* default is indirect IO */ +/* SG_FLAG_UNUSED_LUN_INHIBIT is ignored in sg v4 driver */ +#define SG_FLAG_UNUSED_LUN_INHIBIT 2 /* ignored, was LUN overwrite in cdb */ +#define SG_FLAG_MMAP_IO 4 /* request memory mapped IO */ +/* no transfer of kernel buffers to/from user space; used for sharing */ +#define SG_FLAG_NO_DXFER 0x10000 +/* defaults: for sg driver (v3_v4): Q_AT_HEAD; for block layer: Q_AT_TAIL */ +#define SG_FLAG_Q_AT_TAIL 0x10 +#define SG_FLAG_Q_AT_HEAD 0x20 + +/* Output (potentially OR-ed together) in v3::info or v4::info field */ +#define SG_INFO_OK_MASK 0x1 +#define SG_INFO_OK 0x0 /* no sense, host nor driver "noise" */ +#define SG_INFO_CHECK 0x1 /* something abnormal happened */ + +#define SG_INFO_DIRECT_IO_MASK 0x6 +#define SG_INFO_INDIRECT_IO 0x0 /* data xfer via kernel buffers (or no xfer) */ +#define SG_INFO_DIRECT_IO 0x2 /* direct IO requested and performed */ +#define SG_INFO_MIXED_IO 0x4 /* not used, always 0 */ +#define SG_INFO_DEVICE_DETACHING 0x8 /* completed successfully but ... */ +#define SG_INFO_ABORTED 0x10 /* this command has been aborted */ +#define SG_INFO_MRQ_FINI 0x20 /* marks multi-reqs that have finished */ + +/* + * Pointer to object of this structure filled by ioctl(SG_GET_SCSI_ID). Last + * field changed in v4 driver, was 'int unused[2]' so remains the same size. + */ +typedef struct sg_scsi_id { + int host_no; /* as in "scsi<n>" where 'n' is one of 0, 1, 2 etc */ + int channel; + int scsi_id; /* scsi id of target device */ + int lun; /* lower 32 bits of internal 64 bit integer */ + int scsi_type; /* TYPE_... defined in scsi/scsi.h */ + short h_cmd_per_lun;/* host (adapter) maximum commands per lun */ + short d_queue_depth;/* device (or adapter) maximum queue length */ + int unused[2]; +} sg_scsi_id_t; + +/* For backward compatibility v4 driver yields at most SG_MAX_QUEUE of these */ +typedef struct sg_req_info { /* used by SG_GET_REQUEST_TABLE ioctl() */ + char req_state; /* See 'enum sg_rq_state' definition in v4 driver */ + char orphan; /* 0 -> normal request, 1 -> from interrupted SG_IO */ + /* sg_io_owned set imples synchronous, clear implies asynchronous */ + char sg_io_owned;/* 0 -> complete with read(), 1 -> owned by SG_IO */ + char problem; /* 0 -> no problem detected, 1 -> error to report */ + /* If SG_CTL_FLAGM_TAG_FOR_PACK_ID set on fd then next field is tag */ + int pack_id; /* pack_id, in v4 driver may be tag instead */ + void __user *usr_ptr; /* user provided pointer in v3+v4 interface */ + unsigned int duration; + int unused; +} sg_req_info_t; + +/* + * IOCTLs: Those ioctls that are relevant to the SG 3.x drivers follow. + * [Those that only apply to the SG 2.x drivers are at the end of the file.] + * (_GET_s yield result via 'int *' 3rd argument unless otherwise indicated) + */ + +#define SG_EMULATED_HOST 0x2203 /* true for emulated host adapter (ATAPI) */ + +/* + * Used to configure SCSI command transformation layer for ATAPI devices. + * Only supported by the ide-scsi driver. 20181014 No longer supported, this + * driver passes them to the mid-level which returns a EINVAL (22) errno. + * + * Original note: N.B. 3rd arg is not pointer but value: 3rd arg = 0 to + * disable transform, 1 to enable it + */ +#define SG_SET_TRANSFORM 0x2204 +#define SG_GET_TRANSFORM 0x2205 + +#define SG_SET_RESERVED_SIZE 0x2275 /* request new reserved buffer size */ +#define SG_GET_RESERVED_SIZE 0x2272 /* actual size of reserved buffer */ + +/* The following ioctl has a 'sg_scsi_id_t *' object as its 3rd argument. */ +#define SG_GET_SCSI_ID 0x2276 /* Yields fd's bus, chan, dev, lun + type */ +/* SCSI id information can also be obtained from SCSI_IOCTL_GET_IDLUN */ + +/* Override host setting and always DMA using low memory ( <16MB on i386) */ +#define SG_SET_FORCE_LOW_DMA 0x2279 /* 0-> use adapter setting, 1-> force */ +#define SG_GET_LOW_DMA 0x227a /* 0-> use all ram for dma; 1-> low dma ram */ + +/* + * When SG_SET_FORCE_PACK_ID set to 1, pack_id (or tag) is input to read() or + * ioctl(SG_IO_RECEIVE). These functions wait until matching packet (request/ + * command) is finished but they will return with EAGAIN quickly if the file + * descriptor was opened O_NONBLOCK or (in v4) if SGV4_FLAG_IMMED is given. + * The tag is used when SG_CTL_FLAGM_TAG_FOR_PACK_ID is set on the parent + * file descriptor (default: use pack_id). If pack_id or tag is -1 then read + * oldest waiting and this is the same action as when FORCE_PACK_ID is + * clear on the parent file descriptor. In the v4 interface the pack_id is + * placed the in sg_io_v4::request_extra field . + */ +#define SG_SET_FORCE_PACK_ID 0x227b /* pack_id or in v4 can be tag */ +#define SG_GET_PACK_ID 0x227c /* Yields oldest readable pack_id/tag, or -1 */ + +#define SG_GET_NUM_WAITING 0x227d /* Number of commands awaiting read() */ + +/* Yields max scatter gather tablesize allowed by current host adapter */ +#define SG_GET_SG_TABLESIZE 0x227F /* 0 implies can't do scatter gather */ + +/* + * Integer form of version number: [x]xyyzz where [x] empty when x=0 . + * String form of version number: "[x]x.[y]y.zz" + */ +#define SG_GET_VERSION_NUM 0x2282 /* Example: version "2.1.34" yields 20134 */ + +/* Returns -EBUSY if occupied. 3rd argument pointer to int (see next) */ +#define SG_SCSI_RESET 0x2284 +/* + * Associated values that can be given to SG_SCSI_RESET follow. + * SG_SCSI_RESET_NO_ESCALATE may be OR-ed to the _DEVICE, _TARGET, _BUS + * or _HOST reset value so only that action is attempted. + */ +#define SG_SCSI_RESET_NOTHING 0 +#define SG_SCSI_RESET_DEVICE 1 +#define SG_SCSI_RESET_BUS 2 +#define SG_SCSI_RESET_HOST 3 +#define SG_SCSI_RESET_TARGET 4 +#define SG_SCSI_RESET_NO_ESCALATE 0x100 + +/* synchronous SCSI command ioctl, (for version 3 and 4 interface) */ +#define SG_IO 0x2285 /* similar effect as write() followed by read() */ + +#define SG_GET_REQUEST_TABLE 0x2286 /* yields table of active requests */ + +/* How to treat EINTR during SG_IO ioctl(), only in sg v3 and v4 driver */ +#define SG_SET_KEEP_ORPHAN 0x2287 /* 1 -> hold for read(), 0 -> drop (def) */ +#define SG_GET_KEEP_ORPHAN 0x2288 + +/* + * Yields scsi midlevel's access_count for this SCSI device. 20181014 No + * longer available, always yields 1. + */ +#define SG_GET_ACCESS_COUNT 0x2289 + + +/* + * Default size (in bytes) a single scatter-gather list element can have. + * The value used by the driver is 'max(SG_SCATTER_SZ, PAGE_SIZE)'. This + * value should be a power of 2 (and may be rounded up internally). In the + * v4 driver this can be changed by ioctl(SG_SET_GET_EXTENDED{SGAT_ELEM_SZ}). + */ +#define SG_SCATTER_SZ (8 * 4096) + +/* sg driver users' code should handle retries (e.g. from Unit Attentions) */ +#define SG_DEFAULT_RETRIES 0 + +/* Defaults, commented if they differ from original sg driver */ +#define SG_DEF_FORCE_PACK_ID 0 +#define SG_DEF_KEEP_ORPHAN 0 +#define SG_DEF_RESERVED_SIZE SG_SCATTER_SZ /* load time option */ + +/* + * Maximum outstanding requests (i.e write()s without corresponding read()s) + * yields EDOM from write() if exceeded. This limit only applies prior to + * version 3.9 . It is still used as a maximum number of sg_req_info objects + * that are returned from the SG_GET_REQUEST_TABLE ioctl. + */ +#define SG_MAX_QUEUE 16 + +#define SG_BIG_BUFF SG_DEF_RESERVED_SIZE /* for backward compatibility */ + +/* + * Alternate style type names, "..._t" variants (as found in the + * 'typedef struct * {};' definitions above) are preferred to these: + */ +typedef struct sg_io_hdr Sg_io_hdr; +typedef struct sg_io_vec Sg_io_vec; +typedef struct sg_scsi_id Sg_scsi_id; +typedef struct sg_req_info Sg_req_info; + + +/* vvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvvv */ +/* The v1+v2 SG interface based on the 'sg_header' structure follows. */ +/* ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ */ + +#define SG_MAX_SENSE 16 /* this only applies to the sg_header interface */ + +struct sg_header { + int pack_len; /* [o] reply_len (ie useless), ignored as input */ + int reply_len; /* [i] max length of expected reply (inc. sg_header) */ + int pack_id; /* [io] id number of packet (use ints >= 0) */ + int result; /* [o] 0==ok, else (+ve) Unix errno (best ignored) */ + unsigned int twelve_byte:1; + /* [i] Force 12 byte command length for group 6 & 7 commands */ + unsigned int target_status:5; /* [o] scsi status from target */ + unsigned int host_status:8; /* [o] host status (see "DID" codes) */ + unsigned int driver_status:8; /* [o] driver status+suggestion */ + unsigned int other_flags:10; /* unused */ + unsigned char sense_buffer[SG_MAX_SENSE]; + /* + * [o] Output in 3 cases: + * when target_status is CHECK_CONDITION or + * when target_status is COMMAND_TERMINATED or + * when (driver_status & DRIVER_SENSE) is true. + */ +}; + +/* + * IOCTLs: The following are not required (or ignored) when the v3 or v4 + * interface is used as those structures contain a timeout field. These + * ioctls are kept for backward compatibility with v1+v2 interfaces. + */ + +#define SG_SET_TIMEOUT 0x2201 /* unit: (user space) jiffies */ +#define SG_GET_TIMEOUT 0x2202 /* yield timeout as _return_ value */ + +/* + * Get/set command queuing state per fd (default is SG_DEF_COMMAND_Q. + * Each time a sg_io_hdr_t object is seen on this file descriptor, this + * command queuing flag is set on (overriding the previous setting). + * This setting defaults to 0 (i.e. no queuing) but gets set the first + * time that fd sees a v3 or v4 interface request. + */ +#define SG_GET_COMMAND_Q 0x2270 /* Yields 0 (queuing off) or 1 (on) */ +#define SG_SET_COMMAND_Q 0x2271 /* Change queuing state with 0 or 1 */ + +/* + * Turn on/off error sense trace (1 and 0 respectively, default is off). + * Try using: "# cat /proc/scsi/sg/debug" instead in the v3 driver + */ +#define SG_SET_DEBUG 0x227e /* 0 -> turn off debug */ + +/* + * override SCSI command length with given number on the next write() on + * this file descriptor (v1 and v2 interface only) + */ +#define SG_NEXT_CMD_LEN 0x2283 + +/* command queuing is always on when the v3 or v4 interface is used */ +#define SG_DEF_COMMAND_Q 0 + +#define SG_DEF_UNDERRUN_FLAG 0 + +/* If the timeout value in the v3_v4 interfaces is 0, this value is used */ +#define SG_DEFAULT_TIMEOUT (60*HZ) /* HZ == 'jiffies in 1 second' */ + +#endif /* end of _UAPI_SCSI_SG_H guard */ -- 2.17.1
