Re: [PATCH 1/4] block: add zone open, close and finish support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 6/25/19 12:27 AM, Chaitanya Kulkarni wrote:
On 6/24/19 12:43 PM, Bart Van Assche wrote:
On 6/21/19 6:07 AM, Matias Bjørling wrote:
diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h
index 95202f80676c..067ef9242275 100644
--- a/include/linux/blk_types.h
+++ b/include/linux/blk_types.h
@@ -284,13 +284,20 @@ enum req_opf {
    	REQ_OP_DISCARD		= 3,
    	/* securely erase sectors */
    	REQ_OP_SECURE_ERASE	= 5,
-	/* reset a zone write pointer */
-	REQ_OP_ZONE_RESET	= 6,
    	/* write the same sector many times */
    	REQ_OP_WRITE_SAME	= 7,
    	/* write the zero filled sector many times */
    	REQ_OP_WRITE_ZEROES	= 9,
+ /* reset a zone write pointer */
+	REQ_OP_ZONE_RESET	= 16,
+	/* Open zone(s) */
+	REQ_OP_ZONE_OPEN	= 17,
+	/* Close zone(s) */
+	REQ_OP_ZONE_CLOSE	= 18,
+	/* Finish zone(s) */
+	REQ_OP_ZONE_FINISH	= 19,
+
    	/* SCSI passthrough using struct scsi_request */
    	REQ_OP_SCSI_IN		= 32,
    	REQ_OP_SCSI_OUT		= 33,
@@ -375,6 +382,22 @@ static inline void bio_set_op_attrs(struct bio *bio, unsigned op,
    	bio->bi_opf = op | op_flags;
    }

Are the new operation types ever passed to op_is_write()? The definition
of that function is as follows:

May be we should change numbering since blktrace also relies on the
having on_is_write() without looking at the rq_ops().

197  * Data direction bit lookup
   198  */
   199 static const u32 ddir_act[2] = { BLK_TC_ACT(BLK_TC_READ),
   200                                  BLK_TC_ACT(BLK_TC_WRITE) };  <----
   201
   202 #define BLK_TC_RAHEAD           BLK_TC_AHEAD
   203 #define BLK_TC_PREFLUSH         BLK_TC_FLUSH
   204
   205 /* The ilog2() calls fall out because they're constant */
   206 #define MASK_TC_BIT(rw, __name) ((rw & REQ_ ## __name) << \
   207           (ilog2(BLK_TC_ ## __name) + BLK_TC_SHIFT - __REQ_ ##
__name))
   208
   209 /*
   210  * The worker for the various blk_add_trace*() types. Fills out a
   211  * blk_io_trace structure and places it in a per-cpu subbuffer.
   212  */
   213 static void __blk_add_trace(struct blk_trace *bt, sector_t sector,
int bytes,
   214                      int op, int op_flags, u32 what, int error,
int pdu_len,
   215                      void *pdu_data, union kernfs_node_id *cgid)
   216 {
   217         struct task_struct *tsk = current;
   218         struct ring_buffer_event *event = NULL;
   219         struct ring_buffer *buffer = NULL;
   220         struct blk_io_trace *t;
   221         unsigned long flags = 0;
   222         unsigned long *sequence;
   223         pid_t pid;
   224         int cpu, pc = 0;
   225         bool blk_tracer = blk_tracer_enabled;
   226         ssize_t cgid_len = cgid ? sizeof(*cgid) : 0;
   227
   228         if (unlikely(bt->trace_state != Blktrace_running &&
!blk_tracer))
   229                 return;
   230
   231         what |= ddir_act[op_is_write(op) ? WRITE : READ];  <---


static inline bool op_is_write(unsigned int op)
{
	return (op & 1);
}



The zone mgmt commands are neither write nor reads commands. I guess, one could characterize them as write commands, but they don't write any data, they update a state of a zone on a drive. One should keep it as is? and make sure the zone mgmt commands don't get categorized as either read/write.



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux