[PATCH v2 3/6] esp_scsi: Grant disconnect privilege for untagged commands

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



A SCSI device is not granted disconnect privilege by an esp_scsi host
unless that device has its simple_tags flag set. However, a device may
support disconnect/reselect and not support command queueing. Allow
these devices to disconnect and improve bus utilization.

Tested-by: Stan Johnson <userm57@xxxxxxxxx>
Signed-off-by: Finn Thain <fthain@xxxxxxxxxxxxxxxxxxx>
Tested-by: Michael Schmitz <schmitzmic@xxxxxxxxx>
---
 drivers/scsi/esp_scsi.c | 8 ++------
 1 file changed, 2 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/esp_scsi.c b/drivers/scsi/esp_scsi.c
index 9e5d3f7d29ae..b7c41aa9927c 100644
--- a/drivers/scsi/esp_scsi.c
+++ b/drivers/scsi/esp_scsi.c
@@ -800,13 +800,9 @@ static void esp_maybe_execute_command(struct esp *esp)
 
 build_identify:
 	/* If we don't have a lun-data struct yet, we're probing
-	 * so do not disconnect.  Also, do not disconnect unless
-	 * we have a tag on this command.
+	 * so do not disconnect.
 	 */
-	if (lp && (tp->flags & ESP_TGT_DISCONNECT) && ent->tag[0])
-		*p++ = IDENTIFY(1, lun);
-	else
-		*p++ = IDENTIFY(0, lun);
+	*p++ = IDENTIFY(lp && (tp->flags & ESP_TGT_DISCONNECT), lun);
 
 	if (ent->tag[0] && esp->rev == ESP100) {
 		/* ESP100 lacks select w/atn3 command, use select
-- 
2.18.1




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux