Multi-Initiator SAS

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi everybody!

Alexis and I connected both a Adaptec 9410 and a LSI 1064E SAS initiator
to an expander.  Both machines saw the disks attached to the expander,
and both could send I/Os to the disks.  So far, so good.

We then connected a SATA disk to the expander.  libsas BUGd up in
sas_ex_discover_end_dev (sas_expander.c:636):

BUG_ON(sas_port_add(phy->port) != 0);

mptsas didn't seem to do anything with the SATA device at all, though
when we disconnected the SATA disk it recognized that a SATA device went
away.  We'll have a look at the libsas problem in a jiffy.

--D

-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux