The driver exits port setup after failing the
lpfc_sli4_get_parameters command (messages 0356, 2541, & 1412).
The older CNA adapters do not support the MBX command. In the past
the code was allowed to fail and continue on with initialization.
However a nvme change moved a closing bracket and now makes all
failures terminal.
Revise the logic so that terminal failure only occurs if the command
failed on the newer adapters. Additionally, if parameters are set
that require information from the command and the command failed,
the parameters are erroneous and port set up should fail even on
the older adapters.
Signed-off-by: Dick Kennedy <dick.kennedy@xxxxxxxxxxxx>
Signed-off-by: James Smart <james.smart@xxxxxxxxxxxx>
---
drivers/scsi/lpfc/lpfc_init.c | 21 ++++++++++++++++++---
1 file changed, 18 insertions(+), 3 deletions(-)
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 48a5f067cec6..7ae343b14630 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -5850,6 +5850,8 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
int fof_vectors = 0;
int extra;
uint64_t wwn;
+ u32 if_type;
+ u32 if_fam;
phba->sli4_hba.num_online_cpu = num_online_cpus();
phba->sli4_hba.num_present_cpu = lpfc_present_cpu;
@@ -6171,15 +6173,28 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
*/
rc = lpfc_get_sli4_parameters(phba, mboxq);
if (rc) {
+ if_type = bf_get(lpfc_sli_intf_if_type,
+ &phba->sli4_hba.sli_intf);
+ if_fam = bf_get(lpfc_sli_intf_sli_family,
+ &phba->sli4_hba.sli_intf);
if (phba->sli4_hba.extents_in_use &&
phba->sli4_hba.rpi_hdrs_in_use) {
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"2999 Unsupported SLI4 Parameters "
"Extents and RPI headers enabled.\n");
+ if (if_type == LPFC_SLI_INTF_IF_TYPE_0 &&
+ if_fam == LPFC_SLI_INTF_FAMILY_BE2) {
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ rc = -EIO;
+ goto out_free_bsmbx;
+ }
+ }
+ if (!(if_type == LPFC_SLI_INTF_IF_TYPE_0 &&
+ if_fam == LPFC_SLI_INTF_FAMILY_BE2)) {
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ rc = -EIO;
+ goto out_free_bsmbx;
}
- mempool_free(mboxq, phba->mbox_mem_pool);
- rc = -EIO;
- goto out_free_bsmbx;
}
mempool_free(mboxq, phba->mbox_mem_pool);
--
2.13.1
