Re: lp8000 and 2.6.18-rc6

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 2006-09-13 at 10:44 -0400, Douglas Gilbert wrote:
> No lun 0 either hence the PQual=1 for the inquiry
> response for /dev/sg6 ('sg_inq /dev/sg6'). I suspect
> 'sg_inq /dev/sg7', sg8 and sg9 also have PQual=1.
> There may be a similar pattern to 'sg_luns /dev/sg7',
> sg8 and sg9 as was reported for 'sg_luns /dev/sg6'.

Actually, I don't think so.  The requirement for report luns is that PQ
0 must be included, PQ 1 may be included and PQ 3 must not be included.
However, since LUN 0 doesn't show and it's PQ 1 the array must have
chosen not to include PQ 1; therefore the shown LUNS at 1 3 4 should be
PQ 0.  (although I suppose the discrepancy at LUN 2 could be because
that one is PQ 1).

James


-
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux