[PATCH] scsi: lpfc: use memcpy_toio instead of writeq

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



32-bit architectures generally cannot use writeq(), so we now get a build
failure for the lpfc driver:

drivers/scsi/lpfc/lpfc_sli.c: In function 'lpfc_sli4_wq_put':
drivers/scsi/lpfc/lpfc_sli.c:145:4: error: implicit declaration of function 'writeq'; did you mean 'writeb'? [-Werror=implicit-function-declaration]

Another problem here is that writing out actual data (unlike accessing
mmio registers) means we must write the data with the same endianess
that we have read from memory, but writeq() will perform byte swaps
and add barriers inbetween accesses as we do for registers.

Using memcpy_toio() should do the right thing here, using register
sized stores with correct endianess conversion and barriers (i.e. none),
but on some architectures might fall back to byte-size access.

Side note: shouldn't the driver use ioremap_wc() instead of ioremap()
to get a write-combining mapping on all architectures that support this?

Fixes: 1351e69fc6db ("scsi: lpfc: Add push-to-adapter support to sli4")
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
---
 drivers/scsi/lpfc/lpfc_sli.c | 9 +++------
 1 file changed, 3 insertions(+), 6 deletions(-)

diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index 4ce3ca6f4b79..6749d41753b4 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -115,7 +115,6 @@ lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe *wqe)
 	struct lpfc_register doorbell;
 	uint32_t host_index;
 	uint32_t idx;
-	uint32_t i = 0;
 	uint8_t *tmp;
 
 	/* sanity check on queue memory */
@@ -138,12 +137,10 @@ lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe *wqe)
 	if (q->phba->sli3_options & LPFC_SLI4_PHWQ_ENABLED)
 		bf_set(wqe_wqid, &wqe->generic.wqe_com, q->queue_id);
 	lpfc_sli_pcimem_bcopy(wqe, temp_wqe, q->entry_size);
-	if (q->dpp_enable && q->phba->cfg_enable_dpp) {
+	if (q->dpp_enable && q->phba->cfg_enable_dpp)
 		/* write to DPP aperture taking advatage of Combined Writes */
-		tmp = (uint8_t *)wqe;
-		for (i = 0; i < q->entry_size; i += sizeof(uint64_t))
-			writeq(*((uint64_t *)(tmp + i)), q->dpp_regaddr + i);
-	}
+		memcpy_toio(tmp, q->dpp_regaddr, q->entry_size);
+
 	/* ensure WQE bcopy and DPP flushed before doorbell write */
 	wmb();
 
-- 
2.9.0




[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux