On 11/07/2017 06:03 PM, Ming Lei wrote: > On Tue, Nov 07, 2017 at 03:06:31PM -0700, Jens Axboe wrote: >> On 11/07/2017 10:36 AM, Jens Axboe wrote: >>> On 11/07/2017 10:10 AM, Jens Axboe wrote: >>>> On 11/07/2017 09:29 AM, Jens Axboe wrote: >>>>> On 11/07/2017 09:20 AM, Bart Van Assche wrote: >>>>>> On Tue, 2017-11-07 at 10:11 +0800, Ming Lei wrote: >>>>>>> If you can reproduce, please provide me at least the following log >>>>>>> first: >>>>>>> >>>>>>> find /sys/kernel/debug/block -name tags | xargs cat | grep busy >>>>>>> >>>>>>> If any pending requests arn't completed, please provide the related >>>>>>> info in dbgfs about where is the request. >>>>>> >>>>>> Every time I ran the above or a similar command its output was empty. I >>>>>> assume that's because the hang usually occurs in a phase where these debugfs >>>>>> attributes either have not yet been created or have already disappeared. >>>>> >>>>> Bart, do you still see a hang with the patch that fixes the tag leak when >>>>> we fail to get a dispatch budget? >>>>> >>>>> https://marc.info/?l=linux-block&m=151004881411480&w=2 >>>>> >>>>> I've run a lot of stability testing here, and I haven't run into any >>>>> issues. This is with shared tags as well. So if you still see the failure >>>>> case with the current tree AND the above patch, then I'll try and get >>>>> a test case setup that hits it too so we can get to the bottom of this. >>>> >>>> Ming, I managed to reproduce the hang using null_blk. Note this is >>>> WITHOUT the patch mentioned above, running with that now. >>>> >>>> # modprobe null_blk queue_mode=2 nr_devices=4 shared_tags=1 submit_queues=1 hw_queue_depth=1 >>>> >>>> and using this fio file: >>>> >>>> [global] >>>> bs=4k >>>> rw=randread >>>> norandommap >>>> direct=1 >>>> ioengine=libaio >>>> iodepth=4 >>>> >>>> [nullb0] >>>> filename=/dev/nullb0 >>>> [nullb1] >>>> filename=/dev/nullb1 >>>> [nullb2] >>>> filename=/dev/nullb2 >>>> [nullb3] >>>> filename=/dev/nullb3 >>>> >>>> it seemed to keep running, but it hung when exiting. The troublesome >>>> device was nullb1: >>>> >>>> [ 492.513374] INFO: task fio:3263 blocked for more than 120 seconds. >>>> [ 492.520782] Not tainted 4.14.0-rc7+ #499 >>>> [ 492.526247] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. >>>> [ 492.535904] fio D13208 3263 3211 0x00000000 >>>> [ 492.542535] Call Trace: >>>> [ 492.545764] __schedule+0x279/0x720 >>>> [ 492.550151] schedule+0x33/0x90 >>>> [ 492.554145] io_schedule+0x16/0x40 >>>> [ 492.558435] blk_mq_get_tag+0x148/0x250 >>>> [ 492.563211] ? finish_wait+0x90/0x90 >>>> [ 492.567693] blk_mq_get_request+0xf0/0x3e0 >>>> [ 492.572760] blk_mq_make_request+0xe2/0x690 >>>> [ 492.577913] generic_make_request+0xfc/0x2f0 >>>> [ 492.583177] submit_bio+0x64/0x120 >>>> [ 492.587475] ? set_page_dirty_lock+0x4b/0x60 >>>> [ 492.592736] ? submit_bio+0x64/0x120 >>>> [ 492.597309] ? bio_set_pages_dirty+0x55/0x60 >>>> [ 492.602570] blkdev_direct_IO+0x388/0x3c0 >>>> [ 492.607546] ? free_ioctx_users+0xe0/0xe0 >>>> [ 492.612511] ? blk_mq_dispatch_rq_list+0x238/0x3a0 >>>> [ 492.618353] ? _raw_spin_unlock+0xe/0x20 >>>> [ 492.623227] generic_file_read_iter+0xb3/0xa00 >>>> [ 492.628682] ? generic_file_read_iter+0xb3/0xa00 >>>> [ 492.634334] ? security_file_permission+0x9b/0xc0 >>>> [ 492.640114] blkdev_read_iter+0x35/0x40 >>>> [ 492.644877] aio_read+0xc5/0x120 >>>> [ 492.648973] ? aio_read_events+0x24c/0x340 >>>> [ 492.654124] ? __might_sleep+0x4a/0x80 >>>> [ 492.658800] do_io_submit+0x47c/0x5e0 >>>> [ 492.663373] ? do_io_submit+0x47c/0x5e0 >>>> [ 492.668234] SyS_io_submit+0x10/0x20 >>>> [ 492.672715] ? SyS_io_submit+0x10/0x20 >>>> [ 492.677394] entry_SYSCALL_64_fastpath+0x13/0x94 >>>> [ 492.683039] RIP: 0033:0x7f83d1871717 >>>> [ 492.687521] RSP: 002b:00007ffd38fe5a88 EFLAGS: 00000202 ORIG_RAX: 00000000000000d1 >>>> [ 492.696969] RAX: ffffffffffffffda RBX: 00007f83b6972b50 RCX: 00007f83d1871717 >>>> [ 492.705423] RDX: 0000000001f41418 RSI: 0000000000000001 RDI: 00007f83e4d36000 >>>> [ 492.713889] RBP: 0000000000000001 R08: 0000000000000001 R09: 0000000001f3f2e0 >>>> [ 492.722352] R10: 0000000000001000 R11: 0000000000000202 R12: 00007ffd38fe5be0 >>>> [ 492.730827] R13: 00007f83b6972b01 R14: 00007f83b69824b8 R15: 00007f83b6982368 >>>> >>>> and if we look at the debug entries, it's waiting on a scheduler tag: >>>> >>>> sched_tags:nr_tags=2 >>>> sched_tags:nr_reserved_tags=0 >>>> sched_tags:active_queues=0 >>>> sched_tags:bitmap_tags: >>>> sched_tags:depth=2 >>>> sched_tags:busy=2 >>>> sched_tags:bits_per_word=64 >>>> sched_tags:map_nr=1 >>>> sched_tags:alloc_hint={0, 0, 0, 0, 0, 1, 0, 0, 1, 0, 1, 1, 0, 0, 0, 0, 1, 0, 0, 1, 1, 1, 0, 0, 0, 1, 0, 1, 0, 0, 1, 0, 0, 0, 0, 0, 0, 1, 1, 0, 1, 1, 1, 1, 0, 0, 1, 1, 0, 0, 0, 1, 1, 1, 1, 0, 1, 0, 1, 1, 0, 0, 1, 0} >>>> sched_tags:wake_batch=1 >>>> sched_tags:wake_index=4 >>>> sched_tags:ws={ >>>> sched_tags: {.wait_cnt=-102, .wait=inactive}, >>>> sched_tags: {.wait_cnt=-126, .wait=inactive}, >>>> sched_tags: {.wait_cnt=-72, .wait=inactive}, >>>> sched_tags: {.wait_cnt=-96, .wait=inactive}, >>>> sched_tags: {.wait_cnt=-134, .wait=inactive}, >>>> sched_tags: {.wait_cnt=-116, .wait=inactive}, >>>> sched_tags: {.wait_cnt=-90, .wait=inactive}, >>>> sched_tags: {.wait_cnt=-115, .wait=active}, >>>> sched_tags:} >>>> sched_tags:round_robin=0 >>>> sched_tags_bitmap:00000000: 03 >>>> >>>> with SCHED_RESTART being set: >>>> >>>> state:SCHED_RESTART >>>> >>>> and with the driver tags being idle: >>>> >>>> tags:nr_tags=1 >>>> tags:nr_reserved_tags=0 >>>> tags:active_queues=0 >>>> tags:bitmap_tags: >>>> tags:depth=1 >>>> tags:busy=0 >>>> tags:bits_per_word=64 >>>> tags:map_nr=1 >>>> tags:alloc_hint={0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} >>>> tags:wake_batch=1 >>>> tags:wake_index=3 >>>> tags:ws={ >>>> tags: {.wait_cnt=-48, .wait=inactive}, >>>> tags: {.wait_cnt=-39, .wait=inactive}, >>>> tags: {.wait_cnt=-50, .wait=inactive}, >>>> tags: {.wait_cnt=-47, .wait=inactive}, >>>> tags: {.wait_cnt=-25, .wait=inactive}, >>>> tags: {.wait_cnt=-24, .wait=inactive}, >>>> tags: {.wait_cnt=-47, .wait=inactive}, >>>> tags: {.wait_cnt=-47, .wait=inactive}, >>>> tags:} >>> >>> Unsurprisingly (since this is sched_tags starvation) this still happens >>> with the patch. Same trace as above. Note that dispatch has two requests >>> sitting ready: >>> >>> ffff881ff5ab1000 {.op=READ, .cmd_flags=, .rq_flags=STARTED|IO_STAT, .atomic_flags=COMPLETE, .tag=-1, .internal_tag=0} >>> ffff881ff5ab1240 {.op=READ, .cmd_flags=, .rq_flags=STARTED|IO_STAT, .atomic_flags=COMPLETE, .tag=-1, .internal_tag=1} >>> >>> while we're blocked trying to get a new sched tag off the regular >>> blk_mq_make_request() path. It looks like a missing restart of the hctx. >> >> Just to keep everyone in the loop, this bug is not new to >> for-4.15/block, nor is it new to the current 4.41-rc or 4.13. So it's >> probably different to what Bart is hitting, but it's a bug none the >> less... > > Thanks for running this test ans share us the result. > >> >> To me, this looks like a race between marking the queue as needing a >> restart, and the driver tag being released and re-running the queue. If >> I do: >> >> # echo run > /sys/kernel/debug/block/nullb1/state >> >> then it starts just fine. So there must be a race between marking the >> need for a restart (when getting the driver tag fails), and when one of >> the shared tag queues finishes a request and releases the driver tag. > > Just one hint, blk-mq's RESTART won't work if no requests are pending, > but looks no efficient/reliable way to handle that. Requests are pending, see above output. My assumption/theory was that we were racing on setting restart. Simplified version: CPUX CPUY get_driver_tag, fails complete request, put tag check restart, not set mark needing restart and stall unless new IO is started on the device, since we now have two requests waiting to be dispatched, and a driver tag available for one of them, but nobody left to run the queue. I wasted most of today bisecting this, only to discover it is present in earlier kernels too. So I have nothing backing up the above, except the fact that: 1) We have requests ready to issue in 'dispatch' 2) We have a driver tag available 3) hctx is marked restart, but looks like that happened later since no driver tags are pending I'll try and debug this tomorrow. As I said, this isn't necessarily the same problem that Bart is seeing, since he doesn't trigger it on 4.14-rc or earlier, only in for-4.15/block. Or it could be the same, just a wider window now. Another data point is that I can't trigger it with scsi_debug, but it triggers pretty easily with null_blk. -- Jens Axboe
