Re: support ranges TRIM for libata

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Mar 23, 2017 at 09:47:41AM -0400, James Bottomley wrote:
> > The current implementation already has the issue of that it does
> > corrupt user data reliably if the using SG_IO for WRITE SAME
> > commands.
> 
> That does need fixing.

I don't think it's fixable as long as we translate the data payload.

> Why can't we do what the t10 sat document recommends: if the ATA device
> doesn't support the XL version (32 bit ranges) then translate unmap to
> multiple non-XL commands?

Because libata sits underneath the tag allocator we'd getting into
a giant set of problems.  Where do you expect the new commands to
magically come from?  And adhere to the queueing limits and not actually
deadlock in one way or another?

> I don't necessarily object to the vendor specific 1<->1 approach, it's
> just it won't fix the problem you cited above (SG_IO WRITE SAME), its
> just that now we error the command, which may cause some surprise.

We now error WRITE SAME for passthrough consistently.  Before we only
accepted it only with the unmap bit set, and even did so incorrectly
(not checking that the payload was all zeros).

> I
> also wonder if we couldn't simply do an ATA_16 TRIM if we're already
> going to all the trouble of recognising ATA devices in the sd discard
> path?

We probably could do that as well.  But that would drag a lot more
ATA-specific code into sd.c than just formatting the ranges.



[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]

  Powered by Linux