----- Original Message -----
> From: "Laurence Oberman" <loberman@xxxxxxxxxx>
> To: "Himanshu Madhani" <Himanshu.Madhani@xxxxxxxxxx>
> Cc: "Chad Dupuis" <Chad.Dupuis@xxxxxxxxxx>, "Linux SCSI List" <linux-scsi@xxxxxxxxxxxxxxx>
> Sent: Tuesday, March 14, 2017 8:02:32 PM
> Subject: Re: 4.10+ qla2xxx driver wont load for qla2xxx (ISP2532-based 8Gb) with BAR 3 error, work fine on 4.9
>
>
>
> ----- Original Message -----
> > From: "Himanshu Madhani" <Himanshu.Madhani@xxxxxxxxxx>
> > To: "Laurence Oberman" <loberman@xxxxxxxxxx>
> > Cc: "Chad Dupuis" <Chad.Dupuis@xxxxxxxxxx>, "Linux SCSI List"
> > <linux-scsi@xxxxxxxxxxxxxxx>
> > Sent: Tuesday, March 14, 2017 5:11:13 PM
> > Subject: Re: 4.10+ qla2xxx driver wont load for qla2xxx (ISP2532-based
> > 8Gb) with BAR 3 error, work fine on 4.9
> >
> >
> > ----- Original Message -----
> > > From: "Laurence Oberman" <loberman@xxxxxxxxxx>
> > > To: "Himanshu Madhani" <Himanshu.Madhani@xxxxxxxxxx>
> > > Cc: "Chad Dupuis" <Chad.Dupuis@xxxxxxxxxx>, "Linux SCSI List"
> > > <linux-scsi@xxxxxxxxxxxxxxx>
> > > Sent: Monday, March 13, 2017 9:06:38 PM
> > > Subject: Re: 4.10+ qla2xxx driver wont load for qla2xxx
> > > (ISP2532-based
> > > 8Gb) with BAR 3 error, work fine on 4.9
> > >
> > >
> > >
> > > ----- Original Message -----
> > > > From: "Laurence Oberman" <loberman@xxxxxxxxxx>
> > > > To: "Himanshu Madhani" <Himanshu.Madhani@xxxxxxxxxx>
> > > > Cc: "Chad Dupuis" <Chad.Dupuis@xxxxxxxxxx>, "Linux SCSI List"
> > > > <linux-scsi@xxxxxxxxxxxxxxx>
> > > > Sent: Monday, March 13, 2017 12:54:12 PM
> > > > Subject: Re: 4.10+ qla2xxx driver wont load for qla2xxx
> > > > (ISP2532-based
> > > > 8Gb) with BAR 3 error, work fine on 4.9
> > > >
> > > >
> > > >
> > > > ----- Original Message -----
> > > > > From: "Himanshu Madhani" <Himanshu.Madhani@xxxxxxxxxx>
> > > > > To: "Laurence Oberman" <loberman@xxxxxxxxxx>, "Chad Dupuis"
> > > > > <Chad.Dupuis@xxxxxxxxxx>
> > > > > Cc: "Linux SCSI List" <linux-scsi@xxxxxxxxxxxxxxx>
> > > > > Sent: Monday, March 13, 2017 12:39:03 PM
> > > > > Subject: RE: 4.10+ qla2xxx driver wont load for qla2xxx
> > > > > (ISP2532-based
> > > > > 8Gb) with BAR 3 error, work fine on 4.9
> > > > >
> > > > > Hi Laurence,
> > > > >
> > > > > > -----Original Message-----
> > > > > > From: Laurence Oberman [mailto:loberman@xxxxxxxxxx]
> > > > > > Sent: Sunday, March 12, 2017 11:31 AM
> > > > > > To: Dupuis, Chad <Chad.Dupuis@xxxxxxxxxx>; Madhani, Himanshu
> > > > > > <Himanshu.Madhani@xxxxxxxxxx>
> > > > > > Cc: Linux SCSI List <linux-scsi@xxxxxxxxxxxxxxx>
> > > > > > Subject: Re: 4.10+ qla2xxx driver wont load for qla2xxx
> > > > > > (ISP2532-based
> > > > > > 8Gb)
> > > > > > with BAR 3 error, work fine on 4.9
> > > > > >
> > > > > >
> > > > > >
> > > > > > ----- Original Message -----
> > > > > > > From: "Laurence Oberman" <loberman@xxxxxxxxxx>
> > > > > > > To: "Chad Dupuis" <chad.dupuis@xxxxxxxxxx>, "Himanshu
> > > > > > > Madhani"
> > > > > > > <Himanshu.Madhani@xxxxxxxxxx>
> > > > > > > Cc: "Linux SCSI List" <linux-scsi@xxxxxxxxxxxxxxx>
> > > > > > > Sent: Sunday, March 12, 2017 7:39:23 AM
> > > > > > > Subject: 4.10+ qla2xxx driver wont load for qla2xxx
> > > > > > > (ISP2532-based
> > > > > > > 8Gb) with BAR 3 error, work fine on 4.9
> > > > > > >
> > > > > > > Chad, Himanshu
> > > > > > >
> > > > > > > Before I bisect or go chase changes, wanted to reach out
> > > > > > > because the
> > > > > > > driver seems to be the same version.
> > > > > > > Perhaps this is a PCIE change in the kernel for 4.10
> > > > > > > affecting
> > > > > > > the
> > > > > > > load.
> > > > > > > Its the same targetLIO server I have been using for a long
> > > > > > > time
> > > > > > > with
> > > > > > > 4.9
> > > > > > >
> > > > > > > 27:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre
> > > > > > > Channel
> > > > > > > to
> > > > > > > PCI Express HBA (rev 02)
> > > > > > >
> > > > > > > With 4.9 I have no issues loading the driver for my targetLIO
> > > > > > > server.
> > > > > > > (DL380G8)
> > > > > > >
> > > > > > > # modinfo qla2xxx | more
> > > > > > > filename:
> > > > > > > /lib/modules/4.9.0.lobetcm+/kernel/drivers/scsi/qla2xxx/qla2xxx.ko
> > > > > > > firmware: ql2500_fw.bin
> > > > > > > version: 8.07.00.38-k
> > > > > > > license: GPL
> > > > > > > description: QLogic Fibre Channel HBA Driver
> > > > > > > author: QLogic Corporation
> > > > > > > srcversion: 94A8431A85BFF854B97B02D
> > > > > > >
> > > > > > > [ 8.906351] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre
> > > > > > > Channel
> > > > > > > HBA
> > > > > > > Driver: 8.07.00.38-k.
> > > > > > > [ 10.014052] qla2xxx [0000:27:00.0]-001d: : Found an
> > > > > > > ISP2532
> > > > > > > irq
> > > > > > > 106
> > > > > > > iobase
> > > > > > > 0xffffadce989a1000.
> > > > > > > [ 10.455108] scsi host4: qla2xxx
> > > > > > > [ 10.460206] qla2xxx [0000:27:00.0]-00fb:4: QLogic QLE2562
> > > > > > > -
> > > > > > > PCI-Express
> > > > > > > Dual Channel 8Gb Fibre Channel HBA.
> > > > > > > [ 10.460215] qla2xxx [0000:27:00.0]-00fc:4: ISP2532: PCIe
> > > > > > > (5.0GT/s
> > > > > > > x8)
> > > > > > > @
> > > > > > > 0000:27:00.0 hdma+ host#=4 fw=8.03.00 (90d5).
> > > > > > > [ 10.460545] qla2xxx [0000:27:00.1]-001d: : Found an
> > > > > > > ISP2532
> > > > > > > irq
> > > > > > > 110
> > > > > > > iobase
> > > > > > > 0xffffadce989a9000.
> > > > > > > [ 10.662120] scsi host5: qla2xxx
> > > > > > > [ 11.007841] qla2xxx [0000:27:00.1]-00fb:5: QLogic QLE2562
> > > > > > > -
> > > > > > > PCI-Express
> > > > > > > Dual Channel 8Gb Fibre Channel HBA.
> > > > > > > [ 11.007849] qla2xxx [0000:27:00.1]-00fc:5: ISP2532: PCIe
> > > > > > > (5.0GT/s
> > > > > > > x8)
> > > > > > > @
> > > > > > > 0000:27:00.1 hdma+ host#=5 fw=8.03.00 (90d5).
> > > > > > >
> > > > > > > Rebooting on the same server with 4.10 fails to load
> > > > > > >
> > > > > > > Linux 4.10.0+
> > > > > > > # modinfo qla2xxx | more
> > > > > > > filename:
> > > > > > > /lib/modules/4.10.0+/kernel/drivers/scsi/qla2xxx/qla2xxx.ko
> > > > > > > firmware: ql2500_fw.bin
> > > > > > > version: 8.07.00.38-k
> > > > > > > license: GPL
> > > > > > > description: QLogic Fibre Channel HBA Driver
> > > > > > > author: QLogic Corporation
> > > > > > > srcversion: 939E0595E8A3C2E1BE94392
> > > > > > >
> > > > > > > [ 8.754040] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre
> > > > > > > Channel
> > > > > > > HBA
> > > > > > > Driver: 8.07.00.38-k.
> > > > > > > [ 9.979523] qla2xxx [0000:27:00.0]-001b: : BAR 3 not
> > > > > > > enabled.
> > > > > > > [ 10.201268] qla2xxx [0000:27:00.0]-001d: : Found an
> > > > > > > ISP2532
> > > > > > > irq
> > > > > > > 110
> > > > > > > iobase
> > > > > > > 0xffffacbf189b1000.
> > > > > > > [ 10.407865] scsi host5: qla2xxx
> > > > > > > [ 10.444281] qla2xxx: probe of 0000:27:00.0 failed with
> > > > > > > error
> > > > > > > -22
> > > > > > > [ 10.444519] qla2xxx [0000:27:00.1]-001b: : BAR 3 not
> > > > > > > enabled.
> > > > > > > [ 10.444522] qla2xxx [0000:27:00.1]-001d: : Found an
> > > > > > > ISP2532
> > > > > > > irq
> > > > > > > 110
> > > > > > > iobase
> > > > > > > 0xffffacbf189b9000.
> > > > > > > [ 10.645932] scsi host5: qla2xxx
> > > > > > > [ 10.682233] qla2xxx: probe of 0000:27:00.1 failed with
> > > > > > > error
> > > > > > > -22
> > > > > > >
> > > > > > > Thanks
> > > > > > > Laurence
> > > > > > >
> > > > > >
> > > > > > I started bisecting this, cannot believe others have not bumped
> > > > > > into
> > > > > > this
> > > > > > on
> > > > > > 4.10.
> > > > > > This is a generic QLE2562 and firmware is loaded by the driver
> > > > > > so
> > > > > > wondering
> > > > > > why I am seeing this and other are not.
> > > > > > There is nothing special with the PCIE bus on this DL380G8.
> > > > > >
> > > > > > Anyway during the bisect I got to a point where in the 4.10
> > > > > > commits I
> > > > > > still
> > > > > > saw
> > > > > > the "BAR 3" message but the probe worked.
> > > > > >
> > > > > > [ 7.208237] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre
> > > > > > Channel HBA
> > > > > > Driver:
> > > > > > 8.07.00.38-k.
> > > > > > [ 7.208492] qla2xxx [0000:27:00.0]-001b: : BAR 3 not
> > > > > > enabled.
> > > > > >
> > > > > > see this above but probe did not fail
> > > > > >
> > > > > > [ 7.208494] qla2xxx [0000:27:00.0]-001d: : Found an ISP2532
> > > > > > irq 97
> > > > > > iobase
> > > > > > 0xffffc02f98989000.
> > > > > > [ 7.414738] scsi host4: qla2xxx
> > > > > >
> > > > > > [ 7.419267] qla2xxx [0000:27:00.0]-00fb:4: QLogic QLE2562 -
> > > > > > PCI-Express
> > > > > > Dual
> > > > > > Channel 8Gb Fibre Channel HBA.
> > > > > > [ 7.419278] qla2xxx [0000:27:00.0]-00fc:4: ISP2532: PCIe
> > > > > > (5.0GT/s
> > > > > > x8)
> > > > > > @
> > > > > > 0000:27:00.0 hdma+ host#=4 fw=8.03.00 (90d5).
> > > > > > [ 7.419698] qla2xxx [0000:27:00.1]-001b: : BAR 3 not
> > > > > > enabled.
> > > > > > [ 7.419701] qla2xxx [0000:27:00.1]-001d: : Found an ISP2532
> > > > > > irq 100
> > > > > > iobase
> > > > > > 0xffffc02f989b1000.
> > > > > > [ 7.625691] scsi host6: qla2xxx
> > > > > > [ 7.629218] qla2xxx [0000:27:00.1]-00fb:6: QLogic QLE2562 -
> > > > > > PCI-Express
> > > > > > Dual
> > > > > > Channel 8Gb Fibre Channel HBA.
> > > > > > [ 7.629222] qla2xxx [0000:27:00.1]-00fc:6: ISP2532: PCIe
> > > > > > (5.0GT/s
> > > > > > x8)
> > > > > > @
> > > > > > 0000:27:00.1 hdma+ host#=6
> > > > > >
> > > > > > I marked that still as bad and am continuing, I have 9 builds
> > > > > > to
> > > > > > go.
> > > > > >
> > > > > > Thanks
> > > > > > Laurence
> > > > >
> > > > > We had send patches to address issues discovered when the PCI
> > > > > Affinity
> > > > > were
> > > > > merged into 4.10 kernel.
> > > > >
> > > > > Can you please check if your tree has following patches
> > > > > (Currently
> > > > > they
> > > > > are
> > > > > included in 4.10.2 stable)
> > > > >
> > > > > https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?id=154f7a1523b717cad67e0b3d2ed4c660fd1b2e7c
> > > > >
> > > > > https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?id=699abe249b0e2ca590284424d95490e92ccd6aeb
> > > > >
> > > > > https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable.git/commit/?id=cf9d9110806493e2ea2db7d00a1a991401dfb9d5
> > > > >
> > > > > Also can you apply following patch which addresses issue in PCI
> > > > > layer
> > > > > (This
> > > > > should be included in 4.10 stable branch soon )
> > > > >
> > > > > https://www.spinics.net/lists/linux-pci/msg58742.html
> > > > >
> > > > > Thanks,
> > > > > Himanshu
> > > > >
> > > >
> > > > Hello Himanshu
> > > >
> > > > Many thanks for coming back to me.
> > > > OK, I will test all of this and let you know.
> > > > I dont think I have these and this would explain all this.
> > > >
> > > > Regards
> > > > Laurence
> > > >
> > >
> > > Hello Himanshu
> > > This is still failing for me on the HP DL380G8
> > >
> > > My Stable tree
> > >
> > > root@dhcp40-131 ~]# uname -a
> > > Linux xxxxxx.desklab.eng.bos.redhat.com 4.11.0-rc2+
> > >
> > > $ git show 154f7a1523b717cad67e0b3d2ed4c660fd1b2e7c
> > > commit 154f7a1523b717cad67e0b3d2ed4c660fd1b2e7c
> > > Author: Michael Hernandez <michael.hernandez@xxxxxxxxxx>
> > > Date: Wed Feb 15 15:37:21 2017 -0800
> > >
> > > scsi: qla2xxx: Fix Regression introduced by
> > > pci_alloc_irq_vectors_affinity call.
> > >
> > > commit 67f2db8792f96d8f7521461635d25f9c80245d80 upstream.
> > >
> > > For target mode, we need to increase minimum vectors value by one
> > > to
> > > account for ATIO queue.
> > >
> > > Following stack trace will be seen
> > >
> > > $ git show 699abe249b0e2ca590284424d95490e92ccd6aeb
> > > commit 699abe249b0e2ca590284424d95490e92ccd6aeb
> > > Author: Michael Hernandez <michael.hernandez@xxxxxxxxxx>
> > > Date: Wed Feb 15 15:37:20 2017 -0800
> > >
> > > scsi: qla2xxx: Fix response queue count for Target mode.
> > >
> > > commit d0d2c68b759bbf678e078fd0c71b5fde65a9392c upstream.
> > >
> > > Target mode initialization was not calculating response queue
> > > values
> > > correctly resulting into one less MSI-X vector.
> > >
> > > $ git show cf9d9110806493e2ea2db7d00a1a991401dfb9d5
> > > commit cf9d9110806493e2ea2db7d00a1a991401dfb9d5
> > > Author: Michael Hernandez <michael.hernandez@xxxxxxxxxx>
> > > Date: Wed Feb 15 15:37:19 2017 -0800
> > >
> > > scsi: qla2xxx: Cleaned up queue configuration code.
> > >
> > > commit f54f2cb540b53d55a81d620e816810d59be5cb1b upstream.
> > >
> > > This patch cleaned up queue configuration code, such that once
> > > initialized, we should not touch msix_count value. This will
> > > prevent
> > > incorrect numbers of MSI-X vectors requested while performing
> > > target
> > > mode configuration.
> > >
> > >
> > > Tested, and fails
> > >
> > > root@dhcp40-131 ~]# dmesg | grep qla
> > > [ 8.007786] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel
> > > HBA
> > > Driver: 8.07.00.38-k.
> > > [ 9.583949] qla2xxx [0000:27:00.0]-001b: : BAR 3 not enabled.
> > > [ 9.583951] qla2xxx [0000:27:00.0]-001d: : Found an ISP2532 irq
> > > 106
> > > iobase
> > > 0xffffb3e4589a1000.
> > > [ 9.788259] scsi host4: qla2xxx
> > > [ 9.824578] qla2xxx: probe of 0000:27:00.0 failed with error -22
> > > [ 9.824824] qla2xxx [0000:27:00.1]-001b: : BAR 3 not enabled.
> > > [ 9.824828] qla2xxx [0000:27:00.1]-001d: : Found an ISP2532 irq
> > > 106
> > > iobase
> > > 0xffffb3e4589a9000.
> > > [ 10.030273] scsi host4: qla2xxx
> > > [ 10.066602] qla2xxx: probe of 0000:27:00.1 failed with error -22
> > >
> > >
> > > Now
> > > Patched
> > > https://www.spinics.net/lists/linux-pci/msg58742.html
> > >
> > > [loberman@dhcp40-131 linux-stable]$ patch -p1 < ../patch_pci
> > > patching file drivers/pci/msi.c
> > > Hunk #1 succeeded at 1072 (offset -19 lines).
> > > Hunk #2 succeeded at 1120 (offset -27 lines).
> > > Hunk #3 succeeded at 1200 (offset -27 lines).
> > >
> > > Rebuild kernel
> > > Reboot and test
> > >
> > > Still fails
> > >
> > > [ 8.464491] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel
> > > HBA
> > > Driver: 8.07.00.38-k.
> > > [ 8.464672] qla2xxx [0000:27:00.0]-001b: : BAR 3 not enabled.
> > > [ 8.464675] qla2xxx [0000:27:00.0]-001d: : Found an ISP2532 irq
> > > 101
> > > iobase
> > > 0xffffa3ff58991000.
> > > [ 8.670118] scsi host4: qla2xxx
> > > [ 8.706325] qla2xxx: probe of 0000:27:00.0 failed with error -22
> > > [ 8.706451] qla2xxx [0000:27:00.1]-001b: : BAR 3 not enabled.
> > > [ 8.706453] qla2xxx [0000:27:00.1]-001d: : Found an ISP2532 irq
> > > 101
> > > iobase
> > > 0xffffa3ff589a1000.
> > > [ 8.912089] scsi host4: qla2xxx
> > > [ 8.948324] qla2xxx: probe of 0000:27:00.1 failed with error -22
> > >
> > > Went to test on another system , HP Microserver G8
> > > Same HBA
> > > Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI
> > > Express
> > > HBA (rev 02)
> > >
> > > Works here but complains about the vector count support
> > >
> > > [ 8.056438] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel
> > > HBA
> > > Driver: 8.07.00.38-k.
> > > [ 8.097427] qla2xxx [0000:07:00.0]-001a: : MSI-X vector count: 32.
> > > [ 8.127130] qla2xxx [0000:07:00.0]-001d: : Found an ISP2532 irq 16
> > > iobase
> > > 0xffffbd9100c99000.
> > > [ 8.221834] qla2xxx [0000:07:00.0]-00c6:6: MSI-X: Failed to enable
> > > support
> > > with 32 vectors, using 4 vectors.
> > > [ 8.759660] scsi host6: qla2xxx
> > > [ 8.760085] qla2xxx [0000:07:00.0]-00fb:6: QLogic HPAJ764A - HP
> > > 8Gb
> > > Dual
> > > Channel PCI-e 2.0 FC HBA.
> > > [ 8.760092] qla2xxx [0000:07:00.0]-00fc:6: ISP2532: PCIe (5.0GT/s
> > > x8) @
> > > 0000:07:00.0 hdma+ host#=6 fw=8.03.00 (90d5).
> > > [ 8.760197] qla2xxx [0000:07:00.1]-001a: : MSI-X vector count: 32.
> > > [ 8.760199] qla2xxx [0000:07:00.1]-001d: : Found an ISP2532 irq 17
> > > iobase
> > > 0xffffbd9100cb9000.
> > > [ 8.760428] qla2xxx [0000:07:00.1]-00c6:7: MSI-X: Failed to enable
> > > support
> > > with 32 vectors, using 4 vectors.
> > > [ 8.999658] scsi host7: qla2xxx
> > > [ 9.000124] qla2xxx [0000:07:00.1]-00fb:7: QLogic HPAJ764A - HP
> > > 8Gb
> > > Dual
> > > Channel PCI-e 2.0 FC HBA.
> > > [ 9.000130] qla2xxx [0000:07:00.1]-00fc:7: ISP2532: PCIe (5.0GT/s
> > > x8) @
> > > 0000:07:00.1 hdma+ host#=7 fw=8.03.00 (90d5).
> > >
> > > So something about the DL380 here needs to be figured out as well as
> > > the
> > > MSI-X messages above.
> > >
> > > Earlier kernels up to 4.9.13 are all fine on both servers
> > >
> > > Thanks
> > > Laurence
> > >
> >
> > I meant to add
> >
> > With the G8 Microserver links seem to come up with only the 4 MSI-X
> > vectors but I get this
> > so it not fully healthy
> >
> > [ 373.823667] Rounding down aligned max_sectors from 65535 to 65528
> > [ 399.994495] qla2xxx [0000:07:00.0]-00af:6: Performing ISP error
> > recovery - ha=ffffa0e934210000.
> > [ 400.728968] qla2xxx [0000:07:00.0]-500a:6: LOOP UP detected (8
> > Gbps).
> > [ 401.473405] qla2xxx [0000:07:00.0]-5030:6: Error entry - invalid
> > handle/queue (1c01). ***** Note
> > [ 426.966519] qla2xxx [0000:07:00.1]-00af:7: Performing ISP error
> > recovery - ha=ffffa0e934e30000.
> > [ 427.697601] qla2xxx [0000:07:00.1]-500a:7: LOOP UP detected (8
> > Gbps).
> > [ 428.473948] qla2xxx [0000:07:00.1]-5030:7: Error entry - invalid
> > handle/queue (1c01). ***** Note
> >
> > I have tested the ISP2532 adapter on my DL380p G8 server and did not run
> > into
> > issue described. Can you share complete log with me.
> >
> > [ 615.007032] qla2xxx [0000:27:00.0]-4800:7: DPC handler sleeping.
> > [ 615.124217] qla2xxx [0000:27:00.0]-00fb:7: QLogic QLE2562 - PCI-Express
> > Dual Channel 8Gb Fibre Channel HBA.
> > [ 615.124231] qla2xxx [0000:27:00.0]-00fc:7: ISP2532: PCIe (5.0GT/s x8) @
> > 0000:27:00.0 hdma+ host#=7 fw=8.06.02 (90d5).
> > [ 615.196043] qla2xxx [0000:27:00.0]-580e:7: Asynchronous P2P MODE
> > received.
> > [ 615.235284] qla2xxx [0000:27:00.0]-480b:7: Reset marker scheduled.
> > [ 615.235288] qla2xxx [0000:27:00.0]-480c:7: Reset marker end.
> > [ 615.235291] qla2xxx [0000:27:00.0]-480f:7: Loop resync scheduled.
> > [ 615.237903] qla2xxx [0000:27:00.0]-500a:7: LOOP UP detected (8 Gbps).
> > [ 615.237945] qla2xxx [0000:27:00.0]-5812:7: Port database changed ffff
> > 0006
> > 0000.
> > [ 615.237948] qla2xxx [0000:27:00.0]-107ff:7: Mark all dev lost
> > [ 615.760115] qla2xxx [0000:27:00.0]-8837:7: F/W Ready - OK.
> > [ 615.760177] qla2xxx [0000:27:00.0]-883a:7: fw_state=3 (3, 0, 1e, 800 0)
> > curr time=100013490.
> > [ 615.760285] qla2xxx [0000:27:00.0]-280e:7: HBA in F P2P topology.
> > [ 615.760304] qla2xxx [0000:27:00.0]-2814:7: Configure loop -- dpc flags =
> > 0x152e0.
> > [ 615.763509] qla2xxx [0000:27:00.0]-287d:7: NodeName = 20000024ff460a5c.
> > [ 615.763514] qla2xxx [0000:27:00.0]-28a5:7: Manufacturer = QLogic
> > Corporation.
> > [ 615.763519] qla2xxx [0000:27:00.0]-28a6:7: Serial no. = BFD1230D31975.
> > [ 615.763521] qla2xxx [0000:27:00.0]-28a7:7: Model Name = QLE2562.
> > [ 615.763537] qla2xxx [0000:27:00.0]-28a8:7: Model Desc = PCI-Express Dual
> > Channel 8Gb Fibre Channel HBA.
> > [ 615.763540] qla2xxx [0000:27:00.0]-28a9:7: Hardware ver = PX2810403-01
> > F.
> > [ 615.763543] qla2xxx [0000:27:00.0]-28aa:7: Driver ver =
> > 8.07.00.38-k-debug.
> > [ 615.763547] qla2xxx [0000:27:00.0]-28ab:7: Optrom version = 46.51.
> > [ 615.763551] qla2xxx [0000:27:00.0]-28ac:7: Firmware vers = 8.06.02
> > (90d5).
> > [ 615.763555] qla2xxx [0000:27:00.0]-28ae:7: OS Name and Version = Linux
> > 4.11.0-rc2+ #13 SMP Mon Mar 13 21:51:13 PDT 2017.
> > [ 615.763558] qla2xxx [0000:27:00.0]-28af:7: CT Payload Length = 0x80000.
> > [ 615.763562] qla2xxx [0000:27:00.0]-28b0:7: Symbolic Name = QLE2562
> > FW:v8.06.02 DVR:v8.07.00.38-k-debug.
> > [ 615.763564] qla2xxx [0000:27:00.0]-28b1:7: Vendor Id = 77100000.
> > [ 615.763567] qla2xxx [0000:27:00.0]-28b2:7: Port Num = 1000000.
> > [ 615.763569] qla2xxx [0000:27:00.0]-28b3:7: Fabric Name =
> > 1000000533aa0b87.
> > [ 615.763572] qla2xxx [0000:27:00.0]-28b4:7: BIOS Name = BIOS 3.00
> > [ 615.763575] qla2xxx [0000:27:00.0]-28b1:7: Vendor Identifier = QLGC.
> > [ 615.763577] qla2xxx [0000:27:00.0]-28b5:7: RHBA identifier =
> > 21000024ff460a5c.
> > [ 615.775398] qla2xxx [0000:27:00.0]-28b9:7: RHBA FDMI V2 exiting
> > normally.
> > [ 615.775405] qla2xxx [0000:27:00.0]-28ba:7: FC4_TYPES=01 00.
> > [ 615.775409] qla2xxx [0000:27:00.0]-28bb:7: Supported Port Speed =
> > 1b000000.
> > [ 615.775411] qla2xxx [0000:27:00.0]-28bc:7: Current_Speed = 10000000.
> > [ 615.775414] qla2xxx [0000:27:00.0]-28bc:7: Max_Frame_Size = 80000.
> > [ 615.775417] qla2xxx [0000:27:00.0]-28be:7: OS_Device_Name =
> > qla2xxx:host7.
> > [ 615.775420] qla2xxx [0000:27:00.0]-283d:7: HostName=dut5108.
> > [ 615.775423] qla2xxx [0000:27:00.0]-28c0:7: Node Name = 20000024ff460a5c.
> > [ 615.775425] qla2xxx [0000:27:00.0]-28c1:7: Port Name = 21000024ff460a5c.
> > [ 615.775429] qla2xxx [0000:27:00.0]-28c2:7: port symbolic name = QLE2562
> > FW:v8.06.02 DVR:v8.07.00.38-k-debug
> >
> >
> > Manufacturer: HP
> > Product Name: ProLiant DL380p Gen8
> > Version: Not Specified
> > Serial Number: USE334CSJL
> > UUID: 32333536-3030-5355-4533-333443534A4C
> > Wake-up Type: Power Switch
> > SKU Number: 653200-B21
> > Family: ProLiant
> >
> > Thanks,
> > Himanshu
> >
> >
>
> Hello Himanshu
>
> I just now cloned from Linus's tree and patched with the PCI fixes as you
> suggested.
>
> This gets me this kernel and its failing.
>
> 4.11.0-rc2+
>
> [ 9.099570] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA
> Driver: 8.07.00.38-k.
> [ 9.099704] qla2xxx [0000:27:00.0]-001b: : BAR 3 not enabled.
> [ 9.099705] qla2xxx [0000:27:00.0]-001d: : Found an ISP2532 irq 101 iobase
> 0xfffface3d8999000.
> [ 9.248817] Console: switching to colour frame buffer device 128x48
> [ 9.305051] scsi host4: qla2xxx
> [ 9.341336] qla2xxx: probe of 0000:27:00.0 failed with error -22
> [ 9.341475] qla2xxx [0000:27:00.1]-001b: : BAR 3 not enabled.
> [ 9.341478] qla2xxx [0000:27:00.1]-001d: : Found an ISP2532 irq 101 iobase
> 0xfffface3d89a9000.
> [ 9.547011] scsi host4: qla2xxx
> [ 9.583160] qla2xxx: probe of 0000:27:00.1 failed with error -22
>
> I dont know why yours is not failing here.
> Did you manage to test with the kernel I provided you yet.
>
> My server:
> System Information
> Manufacturer: HP
> Product Name: ProLiant DL380p Gen8
> Version: Not Specified
> Serial Number: USE246MH8W
> UUID: 32333536-3030-5355-4532-34364D483857
> Wake-up Type: Power Switch
> SKU Number: 653200-B21
> Family: ProLiant
>
> My ROM
> Vendor: HP
> Version: P70
> Release Date: 07/01/2015
> Address: 0xF0000
>
> All prior kernels are working fine so I know the hardware is good.
>
> This is what I have installed
>
> 21:00.0 Ethernet controller: QLogic Corp. cLOM8214 1/10GbE Controller (rev
> 58)
> 21:00.1 Ethernet controller: QLogic Corp. cLOM8214 1/10GbE Controller (rev
> 58)
> 24:00.0 Fibre Channel: Emulex Corporation Saturn-X: LightPulse Fibre Channel
> Host Adapter (rev 03)
> 24:00.1 Fibre Channel: Emulex Corporation Saturn-X: LightPulse Fibre Channel
> Host Adapter (rev 03)
> 27:00.0 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI
> Express HBA (rev 02)
> 27:00.1 Fibre Channel: QLogic Corp. ISP2532-based 8Gb Fibre Channel to PCI
> Express HBA (rev 02)
>
> I will attach my boot log in a separate email just to you and Chad
>
> Thanks
> Laurence
>
Hello
Himanshu
Please let me have your .config you are using for your kernel.
Thanks
Laurence
See attached config file.
Attachment:
config-4.11-rc2
Description: config-4.11-rc2
