On Wed, 14 Jun 2006, Sander van Beek - Elexis wrote: > Thanks for your reply. > I've tried this, but the driver still does not seem to recognize the > card. Any other idea's? I'd suggest you contact QLogic's tech-support: http://support.qlogic.com/support/report_problem.asp I'm unaware of any DID of 0x8000: > At 14:08 9-6-2006, Matthew Wilcox wrote: > >On Fri, Jun 09, 2006 at 01:20:57PM +0200, Sander van Beek - Elexis wrote: > >> I recently got two qla2312f-v2 cards from ebay. These are dual 2gbit > >> fibre channel hba's for a pci-x bus. The qlogic site says this type > >> is a HP OEM card and it is not sold directly by qlogic. > >> I tried to get them working on a slackware 10.2 system with the > >> latest stable 2.6 kernel. However, the qla2xxx driver does not see > >> the card. My dmesg only shows this line: > >> > >> Jun 9 11:09:27 clust1 kernel: QLogic Fibre Channel HBA Driver > >> > >> This is how the card shows up in my /proc/pci: > >> > >> Bus 2, device 1, function 1: > >> Class 0c04: PCI device 1077:8000 (rev 1). > >> IRQ 255. > >> Prefetchable 32 bit memory at 0x40000000 [0x403fffff]. weird... -- Andrew - : send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
