Hi all,
I recently got two qla2312f-v2 cards from ebay. These are dual 2gbit
fibre channel hba's for a pci-x bus. The qlogic site says this type
is a HP OEM card and it is not sold directly by qlogic.
I tried to get them working on a slackware 10.2 system with the
latest stable 2.6 kernel. However, the qla2xxx driver does not see
the card. My dmesg only shows this line:
Jun 9 11:09:27 clust1 kernel: QLogic Fibre Channel HBA Driver
This is how the card shows up in my /proc/pci:
Bus 2, device 1, function 1:
Class 0c04: PCI device 1077:8000 (rev 1).
IRQ 255.
Prefetchable 32 bit memory at 0x40000000 [0x403fffff].
Can anyone supply me with some hints what could be wrong, or what I
should do to get them working?
With best regards,
Sander van Beek
---------------------------------------
Ing. S. van Beek
Elexis
Marketing 9
6921 RE Duiven
Tel: +31 (0)26 7110329
Mob: +31 (0)6 28395109
Fax: +31 (0)318 611112
Email: sander@xxxxxxxxx
Web: http://www.elexis.nl
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
