Hi Guilherme,
Can please share us the driver logs (with driver logging_level set to
0x3f8) for the original issue (i.e. without this patch changes) and
the HBA firmware version you have used.
Also can you please share us the steps you have followed to reproduce
this issue, so that I can try on my setup.
Thanks,
Sreekanth
On Wed, Dec 28, 2016 at 6:21 PM, Guilherme G. Piccoli
<gpiccoli@xxxxxxxxxxxxxxxxxx> wrote:
> From: Ram Pai <linuxram@xxxxxxxxxx>
>
> The firmware or device, possibly under a heavy I/O load, can return
> on a partial unaligned boundary. Scsi-ml expects these requests to be
> completed on an alignment boundary. Scsi-ml blindly requeues the I/O
> without checking the alignment boundary of the I/O request for the
> remaining bytes. This leads to errors, since devices cannot perform
> non-aligned read/write operations.
>
> This patch fixes the issue in the driver. It aligns unaligned
> completions of FS requests, by truncating them to the nearest
> alignment boundary.
>
> Reported-by: Mauricio Faria De Oliveira <mauricfo@xxxxxxxxxxxxxxxxxx>
> Signed-off-by: Guilherme G. Piccoli <gpiccoli@xxxxxxxxxxxxxxxxxx>
> Signed-off-by: Ram Pai <linuxram@xxxxxxxxxx>
> ---
> drivers/scsi/mpt3sas/mpt3sas_scsih.c | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> index b5c966e..55332a3 100644
> --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c
> @@ -4644,6 +4644,8 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
> struct MPT3SAS_DEVICE *sas_device_priv_data;
> u32 response_code = 0;
> unsigned long flags;
> + unsigned int sector_sz;
> + struct request *req;
>
> mpi_reply = mpt3sas_base_get_reply_virt_addr(ioc, reply);
> scmd = _scsih_scsi_lookup_get_clear(ioc, smid);
> @@ -4703,6 +4705,20 @@ _scsih_io_done(struct MPT3SAS_ADAPTER *ioc, u16 smid, u8 msix_index, u32 reply)
> }
>
> xfer_cnt = le32_to_cpu(mpi_reply->TransferCount);
> +
> + /* In case of bogus fw or device, we could end up having
> + * unaligned partial completion. We can force alignment here,
> + * then scsi-ml does not need to handle this misbehavior.
> + */
> + sector_sz = scmd->device->sector_size;
> + req = scmd->request;
> + if (unlikely(sector_sz && req && (req->cmd_type == REQ_TYPE_FS) &&
> + (xfer_cnt % sector_sz))) {
> + sdev_printk(KERN_INFO, scmd->device,
> + "unaligned partial completion avoided\n");
> + xfer_cnt = (xfer_cnt / sector_sz) * sector_sz;
> + }
> +
> scsi_set_resid(scmd, scsi_bufflen(scmd) - xfer_cnt);
> if (ioc_status & MPI2_IOCSTATUS_FLAG_LOG_INFO_AVAILABLE)
> log_info = le32_to_cpu(mpi_reply->IOCLogInfo);
> --
> 2.1.0
>
--
To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
