Hi
On Thu, Mar 30, 2006 at 05:54:48PM +0200, Ingo Flaschberger wrote:
+ {"COMPAQ", "ARRAY CONTROLLER", "2.60", BLIST_SPARSELUN | BLIST_LARGELUN |
+ BLIST_MAX_512K | BLIST_REPORTLUN}, /* Compaq RA4x00 */
+ {"COMPAQ", "LOGICAL VOLUME", "2.60", BLIST_MAX_512K}, /* Compaq RA4x00 */
{"COMPAQ", "LOGICAL VOLUME", NULL, BLIST_FORCELUN},
Related to Matthew's question ...
The revision field is not used, so you should combine the above into one
entry, else the first one will always be used.
Version 5.
bye,
Ingo
diff -r -u linux-2.6.16_org/drivers/scsi/scsi.c linux-2.6.16/drivers/scsi/scsi.c
--- linux-2.6.16_org/drivers/scsi/scsi.c 2006-03-20 06:53:29.000000000 +0100
+++ linux-2.6.16/drivers/scsi/scsi.c 2006-03-30 17:29:26.000000000 +0200
@@ -567,7 +567,7 @@
/*
* If SCSI-2 or lower, store the LUN value in cmnd.
*/
- if (cmd->device->scsi_level <= SCSI_2) {
+ if ((cmd->device->scsi_level <= SCSI_2) && (cmd->device->scsi_level != SCSI_UNKNOWN)) {
cmd->cmnd[1] = (cmd->cmnd[1] & 0x1f) |
(cmd->device->lun << 5 & 0xe0);
}
diff -r -u linux-2.6.16_org/drivers/scsi/scsi_devinfo.c linux-2.6.16/drivers/scsi/scsi_devinfo.c
--- linux-2.6.16_org/drivers/scsi/scsi_devinfo.c 2006-03-30 19:15:30.000000000 +0200
+++ linux-2.6.16/drivers/scsi/scsi_devinfo.c 2006-03-30 20:16:47.000000000 +0200
@@ -132,7 +132,9 @@
{"CMD", "CRA-7280", NULL, BLIST_SPARSELUN}, /* CMD RAID Controller */
{"CNSI", "G7324", NULL, BLIST_SPARSELUN}, /* Chaparral G7324 RAID */
{"CNSi", "G8324", NULL, BLIST_SPARSELUN}, /* Chaparral G8324 RAID */
- {"COMPAQ", "LOGICAL VOLUME", NULL, BLIST_FORCELUN},
+ {"COMPAQ", "ARRAY CONTROLLER", NULL, BLIST_SPARSELUN | BLIST_LARGELUN |
+ BLIST_MAX_512K | BLIST_REPORTLUN}, /* Compaq RA4x00 */
+ {"COMPAQ", "LOGICAL VOLUME", NULL, BLIST_FORCELUN | BLIST_MAX_512K}, /* Compaq RA4x00 */
{"COMPAQ", "CR3500", NULL, BLIST_FORCELUN},
{"COMPAQ", "MSA1000", NULL, BLIST_SPARSELUN | BLIST_NOSTARTONADD},
{"COMPAQ", "MSA1000 VOLUME", NULL, BLIST_SPARSELUN | BLIST_NOSTARTONADD},
diff -r -u linux-2.6.16_org/drivers/scsi/scsi_scan.c linux-2.6.16/drivers/scsi/scsi_scan.c
--- linux-2.6.16_org/drivers/scsi/scsi_scan.c 2006-03-30 19:29:12.000000000 +0200
+++ linux-2.6.16/drivers/scsi/scsi_scan.c 2006-03-30 20:17:09.000000000 +0200
@@ -647,6 +647,7 @@
case TYPE_MEDIUM_CHANGER:
case TYPE_ENCLOSURE:
case TYPE_COMM:
+ case TYPE_RAID:
case TYPE_RBC:
sdev->writeable = 1;
break;
@@ -716,6 +717,14 @@
sdev->select_no_atn = 1;
/*
+ * Maximum 512K cdb transfer length
+ * broken RA4x00 Compaq Disk Array
+ */
+ sdev->max_xfer_len = 0xffff;
+ if (*bflags & BLIST_MAX_512K)
+ sdev->max_xfer_len = 0x200;
+
+ /*
* Some devices may not want to have a start command automatically
* issued when a device is added.
*/
@@ -1088,10 +1097,13 @@
* Also allow SCSI-2 and SCSI-UNKNOWN if BLIST_REPORTLUN is set and host
* adapter does support more than 8 LUNs.
*/
- if ((bflags & BLIST_NOREPORTLUN) ||
- starget->scsi_level < SCSI_2 ||
- (starget->scsi_level < SCSI_3 &&
- (!(bflags & BLIST_REPORTLUN) || shost->max_lun <= 8)) )
+ if (bflags & BLIST_NOREPORTLUN)
+ return 1;
+ if ((starget->scsi_level < SCSI_2) &&
+ (starget->scsi_level != SCSI_UNKNOWN))
+ return 1;
+ if (starget->scsi_level < SCSI_3 &&
+ (!(bflags & BLIST_REPORTLUN) || shost->max_lun <= 8))
return 1;
if (bflags & BLIST_NOLUN)
return 0;
diff -r -u linux-2.6.16_org/drivers/scsi/sd.c linux-2.6.16/drivers/scsi/sd.c
--- linux-2.6.16_org/drivers/scsi/sd.c 2006-03-20 06:53:29.000000000 +0100
+++ linux-2.6.16/drivers/scsi/sd.c 2006-03-30 18:10:12.000000000 +0200
@@ -22,6 +22,8 @@
* - Badari Pulavarty <pbadari@xxxxxxxxxx>, Matthew Wilcox
* <willy@xxxxxxxxxx>, Kurt Garloff <garloff@xxxxxxx>:
* Support 32k/1M disks.
+ * - Added Compaq RA4x00 Fiber Channel Array support, 29.03.2006
+ * crossip communications gmbh - Ingo Flaschberger <if@xxxxxx>
*
* Logging policy (needs CONFIG_SCSI_LOGGING defined):
* - setting up transfer: SCSI_LOG_HLQUEUE levels 1 and 2
@@ -344,8 +346,8 @@
SCpnt->cmnd[14] = SCpnt->cmnd[15] = 0;
} else if ((this_count > 0xff) || (block > 0x1fffff) ||
SCpnt->device->use_10_for_rw) {
- if (this_count > 0xffff)
- this_count = 0xffff;
+ if (this_count > SCpnt->device->max_xfer_len)
+ this_count = SCpnt->device->max_xfer_len;
SCpnt->cmnd[0] += READ_10 - READ_6;
SCpnt->cmnd[1] |= blk_fua_rq(rq) ? 0x8 : 0;
diff -r -u linux-2.6.16_org/include/scsi/scsi_device.h linux-2.6.16/include/scsi/scsi_device.h
--- linux-2.6.16_org/include/scsi/scsi_device.h 2006-03-20 06:53:29.000000000 +0100
+++ linux-2.6.16/include/scsi/scsi_device.h 2006-03-30 17:52:44.000000000 +0200
@@ -89,6 +89,7 @@
* scsi_devinfo.[hc]. For now used only to
* pass settings from slave_alloc to scsi
* core. */
+ unsigned short max_xfer_len; /* Maximum xfer length in one cdb */
unsigned writeable:1;
unsigned removable:1;
unsigned changed:1; /* Data invalid due to media change */
diff -r -u linux-2.6.16_org/include/scsi/scsi_devinfo.h linux-2.6.16/include/scsi/scsi_devinfo.h
--- linux-2.6.16_org/include/scsi/scsi_devinfo.h 2006-03-30 19:37:56.000000000 +0200
+++ linux-2.6.16/include/scsi/scsi_devinfo.h 2006-03-30 19:47:20.000000000 +0200
@@ -29,4 +29,5 @@
#define BLIST_NO_ULD_ATTACH 0x100000 /* device is actually for RAID config */
#define BLIST_SELECT_NO_ATN 0x200000 /* select without ATN */
#define BLIST_RETRY_HWERROR 0x400000 /* retry HARDWARE_ERROR */
+#define BLIST_MAX_512K 0x1000000 /* maximum 512K cdb transfer length */
#endif
diff -r -u linux-2.6.16_org/drivers/scsi/scsi_devinfo.c linux-2.6.16/drivers/scsi/scsi_devinfo.c
--- linux-2.6.16_org/drivers/scsi/scsi_devinfo.c 2006-03-20 06:53:29.000000000 +0100
+++ linux-2.6.16/drivers/scsi/scsi_devinfo.c 2006-03-30 19:15:30.000000000 +0200
@@ -121,7 +121,7 @@
* Other types of devices that have special flags.
* Note that all USB devices should have the BLIST_INQUIRY_36 flag.
*/
- {"3PARdata", "VV", NULL, BLIST_REPORTLUN2},
+ {"3PARdata", "VV", NULL, BLIST_REPORTLUN},
{"ADAPTEC", "AACRAID", NULL, BLIST_FORCELUN},
{"ADAPTEC", "Adaptec 5400S", NULL, BLIST_FORCELUN},
{"AFT PRO", "-IX CF", "0.0>", BLIST_FORCELUN},
@@ -136,9 +136,9 @@
{"COMPAQ", "CR3500", NULL, BLIST_FORCELUN},
{"COMPAQ", "MSA1000", NULL, BLIST_SPARSELUN | BLIST_NOSTARTONADD},
{"COMPAQ", "MSA1000 VOLUME", NULL, BLIST_SPARSELUN | BLIST_NOSTARTONADD},
- {"COMPAQ", "HSV110", NULL, BLIST_REPORTLUN2 | BLIST_NOSTARTONADD},
+ {"COMPAQ", "HSV110", NULL, BLIST_REPORTLUN | BLIST_NOSTARTONADD},
{"DDN", "SAN DataDirector", "*", BLIST_SPARSELUN},
- {"DEC", "HSG80", NULL, BLIST_REPORTLUN2 | BLIST_NOSTARTONADD},
+ {"DEC", "HSG80", NULL, BLIST_REPORTLUN | BLIST_NOSTARTONADD},
{"DELL", "PV660F", NULL, BLIST_SPARSELUN},
{"DELL", "PV660F PSEUDO", NULL, BLIST_SPARSELUN},
{"DELL", "PSEUDO DEVICE .", NULL, BLIST_SPARSELUN}, /* Dell PV 530F */
@@ -158,7 +158,7 @@
{"HP", "A6189A", NULL, BLIST_SPARSELUN | BLIST_LARGELUN}, /* HP VA7400 */
{"HP", "OPEN-", "*", BLIST_SPARSELUN | BLIST_LARGELUN}, /* HP XP Arrays */
{"HP", "NetRAID-4M", NULL, BLIST_FORCELUN},
- {"HP", "HSV100", NULL, BLIST_REPORTLUN2 | BLIST_NOSTARTONADD},
+ {"HP", "HSV100", NULL, BLIST_REPORTLUN | BLIST_NOSTARTONADD},
{"HP", "C1557A", NULL, BLIST_FORCELUN},
{"HP", "C3323-300", "4269", BLIST_NOTQ},
{"IBM", "AuSaV1S2", NULL, BLIST_FORCELUN},
@@ -176,7 +176,7 @@
{"Medion", "Flash XL MMC/SD", "2.6D", BLIST_FORCELUN},
{"MegaRAID", "LD", NULL, BLIST_FORCELUN},
{"MICROP", "4110", NULL, BLIST_NOTQ},
- {"MYLEX", "DACARMRB", "*", BLIST_REPORTLUN2},
+ {"MYLEX", "DACARMRB", "*", BLIST_REPORTLUN},
{"nCipher", "Fastness Crypto", NULL, BLIST_FORCELUN},
{"NAKAMICH", "MJ-4.8S", NULL, BLIST_FORCELUN | BLIST_SINGLELUN},
{"NAKAMICH", "MJ-5.16S", NULL, BLIST_FORCELUN | BLIST_SINGLELUN},
@@ -193,7 +193,7 @@
{"SEAGATE", "ST3390N", "9546", BLIST_NOTQ},
{"SGI", "RAID3", "*", BLIST_SPARSELUN},
{"SGI", "RAID5", "*", BLIST_SPARSELUN},
- {"SGI", "TP9100", "*", BLIST_REPORTLUN2},
+ {"SGI", "TP9100", "*", BLIST_REPORTLUN},
{"SGI", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
{"IBM", "Universal Xport", "*", BLIST_NO_ULD_ATTACH},
{"SMSC", "USB 2 HS-CF", NULL, BLIST_SPARSELUN | BLIST_INQUIRY_36},
diff -r -u linux-2.6.16_org/drivers/scsi/scsi_scan.c linux-2.6.16/drivers/scsi/scsi_scan.c
--- linux-2.6.16_org/drivers/scsi/scsi_scan.c 2006-03-20 06:53:29.000000000 +0100
+++ linux-2.6.16/drivers/scsi/scsi_scan.c 2006-03-30 19:29:12.000000000 +0200
@@ -1085,13 +1085,13 @@
/*
* Only support SCSI-3 and up devices if BLIST_NOREPORTLUN is not set.
- * Also allow SCSI-2 if BLIST_REPORTLUN2 is set and host adapter does
- * support more than 8 LUNs.
+ * Also allow SCSI-2 and SCSI-UNKNOWN if BLIST_REPORTLUN is set and host
+ * adapter does support more than 8 LUNs.
*/
if ((bflags & BLIST_NOREPORTLUN) ||
starget->scsi_level < SCSI_2 ||
(starget->scsi_level < SCSI_3 &&
- (!(bflags & BLIST_REPORTLUN2) || shost->max_lun <= 8)) )
+ (!(bflags & BLIST_REPORTLUN) || shost->max_lun <= 8)) )
return 1;
if (bflags & BLIST_NOLUN)
return 0;
diff -r -u linux-2.6.16_org/include/scsi/scsi_devinfo.h linux-2.6.16/include/scsi/scsi_devinfo.h
--- linux-2.6.16_org/include/scsi/scsi_devinfo.h 2006-03-20 06:53:29.000000000 +0100
+++ linux-2.6.16/include/scsi/scsi_devinfo.h 2006-03-30 19:37:56.000000000 +0200
@@ -21,8 +21,9 @@
#define BLIST_MS_SKIP_PAGE_3F 0x4000 /* do not send ms page 0x3f */
#define BLIST_USE_10_BYTE_MS 0x8000 /* use 10 byte ms before 6 byte ms */
#define BLIST_MS_192_BYTES_FOR_3F 0x10000 /* 192 byte ms page 0x3f request */
-#define BLIST_REPORTLUN2 0x20000 /* try REPORT_LUNS even for SCSI-2 devs
- (if HBA supports more than 8 LUNs) */
+#define BLIST_REPORTLUN 0x20000 /* try REPORT_LUNS even for SCSI-2 and
+ SCSI-UNKNOWN devs
+ (if HBA supports more than 8 LUNs) */
#define BLIST_NOREPORTLUN 0x40000 /* don't try REPORT_LUNS scan (SCSI-3 devs) */
#define BLIST_NOT_LOCKABLE 0x80000 /* don't use PREVENT-ALLOW commands */
#define BLIST_NO_ULD_ATTACH 0x100000 /* device is actually for RAID config */
