Hello James,
On Wed, 2006-03-29 at 22:23 +0200, Ingo Flaschberger wrote:
When you mean:
if ((bflags & BLIST_NOREPORTLUN) ||
starget->scsi_level < SCSI_2 ||
((starget->scsi_level < SCSI_3 ||
starget->scsi_level == SCSI_UNKNOWN) &&
(!(bflags & BLIST_REPORTLUN2) || shost->max_lun <= 8)) )
return 1;
That also hits return.
Then invert the SCSI2 test
And need to do some checks in SCSI-3 also.
See the attached patch version 2.
Bye,
Ingo
diff -r -u linux-2.6.16_org/Documentation/scsi/RA4x00.txt linux-2.6.16/Documentation/scsi/RA4x00.txt
--- linux-2.6.16_org/Documentation/scsi/RA4x00.txt 2006-03-30 00:19:32.000000000 +0200
+++ linux-2.6.16/Documentation/scsi/RA4x00.txt 2006-03-29 20:35:17.000000000 +0200
@@ -0,0 +1,20 @@
+Compaq RA4x00 Fiber Channel Array support if@xxxxxx 29.03.2006
+ crossip communications gmbh
+
+In 2.4.x linux kernels the cpqfc driver supported the Compaq RA4x00 Fiber
+Channel Array. Limitation in 2.4.x kernels was that the RA4x00 only worked with
+a cpqfc supported fiber channel adapter (Tachyon chipset).
+
+In 2.6.x linux kernels the support for the cpqfc has been dropped because of
+very awful code and resulting porting problems from 2.4.x to 2.6.x.
+
+Support for the RA4x00 is now directly in the linux kernel but need some
+special configuration:
+*) Use a already supported fiber channel cards
+*) Update the RA4x00 to firmware version 2.60
+*) Load the scsi_mod modules with option: max_luns=4294967295
+
+
+More information about the RA4x00 could be found:
+http://hp.com
+http://ra4x00.xip.at
diff -r -u linux-2.6.16_org/drivers/scsi/scsi.c linux-2.6.16/drivers/scsi/scsi.c
--- linux-2.6.16_org/drivers/scsi/scsi.c 2006-03-20 06:53:29.000000000 +0100
+++ linux-2.6.16/drivers/scsi/scsi.c 2006-03-30 14:46:52.000000000 +0200
@@ -35,6 +35,10 @@
* Jiffies wrap fixes (host->resetting), 3 Dec 1998 Andrea Arcangeli
*
* out_of_space hacks, D. Gilbert (dpg) 990608
+ *
+ * Added Compaq RA4x00 Fiber Channel Array support, 29.03.2006
+ * crossip communications gmbh - Ingo Flaschberger <if@xxxxxx>
+ *
*/
#include <linux/module.h>
@@ -567,7 +571,7 @@
/*
* If SCSI-2 or lower, store the LUN value in cmnd.
*/
- if (cmd->device->scsi_level <= SCSI_2) {
+ if ((cmd->device->scsi_level <= SCSI_2) && (cmd->device->scsi_level != SCSI_UNKNOWN)) {
cmd->cmnd[1] = (cmd->cmnd[1] & 0x1f) |
(cmd->device->lun << 5 & 0xe0);
}
diff -r -u linux-2.6.16_org/drivers/scsi/scsi_devinfo.c linux-2.6.16/drivers/scsi/scsi_devinfo.c
--- linux-2.6.16_org/drivers/scsi/scsi_devinfo.c 2006-03-20 06:53:29.000000000 +0100
+++ linux-2.6.16/drivers/scsi/scsi_devinfo.c 2006-03-30 14:33:54.000000000 +0200
@@ -132,6 +132,9 @@
{"CMD", "CRA-7280", NULL, BLIST_SPARSELUN}, /* CMD RAID Controller */
{"CNSI", "G7324", NULL, BLIST_SPARSELUN}, /* Chaparral G7324 RAID */
{"CNSi", "G8324", NULL, BLIST_SPARSELUN}, /* Chaparral G8324 RAID */
+ {"COMPAQ", "ARRAY CONTROLLER", "2.60", BLIST_SPARSELUN | BLIST_LARGELUN |
+ BLIST_MAX_512K}, /* Compaq RA4x00 */
+ {"COMPAQ", "LOGICAL VOLUME", "2.60", BLIST_MAX_512K}, /* Compaq RA4x00 */
{"COMPAQ", "LOGICAL VOLUME", NULL, BLIST_FORCELUN},
{"COMPAQ", "CR3500", NULL, BLIST_FORCELUN},
{"COMPAQ", "MSA1000", NULL, BLIST_SPARSELUN | BLIST_NOSTARTONADD},
diff -r -u linux-2.6.16_org/drivers/scsi/scsi_scan.c linux-2.6.16/drivers/scsi/scsi_scan.c
--- linux-2.6.16_org/drivers/scsi/scsi_scan.c 2006-03-20 06:53:29.000000000 +0100
+++ linux-2.6.16/drivers/scsi/scsi_scan.c 2006-03-30 14:42:28.000000000 +0200
@@ -23,6 +23,11 @@
* all of the LUNs returned by the REPORT LUN; else,
* sequentially scan LUNs up until some maximum is reached,
* or a LUN is seen that cannot have a device attached to it.
+ *
+ * Modification history:
+ * - Added Compaq RA4x00 Fiber Channel Array support, 29.03.2006
+ * crossip communications gmbh - Ingo Flaschberger <if@xxxxxx>
+ *
*/
#include <linux/config.h>
@@ -647,6 +652,7 @@
case TYPE_MEDIUM_CHANGER:
case TYPE_ENCLOSURE:
case TYPE_COMM:
+ case TYPE_RAID:
case TYPE_RBC:
sdev->writeable = 1;
break;
@@ -715,6 +721,14 @@
if (*bflags & BLIST_SELECT_NO_ATN)
sdev->select_no_atn = 1;
+ /*
+ * Maximum 512K cdb transfer length
+ * broken RA4x00 Compaq Disk Array
+ */
+ if (*bflags & BLIST_MAX_512K) {
+ sdev->max_512k = 1;
+ }
+
/*
* Some devices may not want to have a start command automatically
* issued when a device is added.
@@ -1089,9 +1103,12 @@
* support more than 8 LUNs.
*/
if ((bflags & BLIST_NOREPORTLUN) ||
- starget->scsi_level < SCSI_2 ||
- (starget->scsi_level < SCSI_3 &&
- (!(bflags & BLIST_REPORTLUN2) || shost->max_lun <= 8)) )
+ ((starget->scsi_level < SCSI_2) &&
+ (starget->scsi_level != SCSI_UNKNOWN)) ||
+ (starget->scsi_level < SCSI_3 &&
+ ((!(bflags & BLIST_REPORTLUN2) &&
+ (starget->scsi_level != SCSI_UNKNOWN)) ||
+ shost->max_lun <= 8)) )
return 1;
if (bflags & BLIST_NOLUN)
return 0;
diff -r -u linux-2.6.16_org/drivers/scsi/sd.c linux-2.6.16/drivers/scsi/sd.c
--- linux-2.6.16_org/drivers/scsi/sd.c 2006-03-20 06:53:29.000000000 +0100
+++ linux-2.6.16/drivers/scsi/sd.c 2006-03-29 20:03:17.000000000 +0200
@@ -22,6 +22,8 @@
* - Badari Pulavarty <pbadari@xxxxxxxxxx>, Matthew Wilcox
* <willy@xxxxxxxxxx>, Kurt Garloff <garloff@xxxxxxx>:
* Support 32k/1M disks.
+ * - Added Compaq RA4x00 Fiber Channel Array support, 29.03.2006
+ * crossip communications gmbh - Ingo Flaschberger <if@xxxxxx>
*
* Logging policy (needs CONFIG_SCSI_LOGGING defined):
* - setting up transfer: SCSI_LOG_HLQUEUE levels 1 and 2
@@ -344,8 +346,14 @@
SCpnt->cmnd[14] = SCpnt->cmnd[15] = 0;
} else if ((this_count > 0xff) || (block > 0x1fffff) ||
SCpnt->device->use_10_for_rw) {
- if (this_count > 0xffff)
- this_count = 0xffff;
+ if (SCpnt->device->max_512k) {
+ if (this_count > 0x200) {
+ this_count = 0x200;
+ }
+ } else {
+ if (this_count > 0xffff)
+ this_count = 0xffff;
+ }
SCpnt->cmnd[0] += READ_10 - READ_6;
SCpnt->cmnd[1] |= blk_fua_rq(rq) ? 0x8 : 0;
diff -r -u linux-2.6.16_org/include/scsi/scsi_device.h linux-2.6.16/include/scsi/scsi_device.h
--- linux-2.6.16_org/include/scsi/scsi_device.h 2006-03-20 06:53:29.000000000 +0100
+++ linux-2.6.16/include/scsi/scsi_device.h 2006-03-30 14:29:45.000000000 +0200
@@ -112,6 +112,7 @@
* this device */
unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN
* because we did a bus reset. */
+ unsigned max_512k:1; /* maximum 512K cdb transfer length */
unsigned use_10_for_rw:1; /* first try 10-byte read / write */
unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
unsigned skip_ms_page_8:1; /* do not use MODE SENSE page 0x08 */
diff -r -u linux-2.6.16_org/include/scsi/scsi_devinfo.h linux-2.6.16/include/scsi/scsi_devinfo.h
--- linux-2.6.16_org/include/scsi/scsi_devinfo.h 2006-03-20 06:53:29.000000000 +0100
+++ linux-2.6.16/include/scsi/scsi_devinfo.h 2006-03-30 14:29:19.000000000 +0200
@@ -28,4 +28,5 @@
#define BLIST_NO_ULD_ATTACH 0x100000 /* device is actually for RAID config */
#define BLIST_SELECT_NO_ATN 0x200000 /* select without ATN */
#define BLIST_RETRY_HWERROR 0x400000 /* retry HARDWARE_ERROR */
+#define BLIST_MAX_512K 0x1000000 /* maximum 512K cdb transfer length */
#endif
