Hi!
IT WORKS *GGG*
(but only with already supported fc cards, cpqfc card is still missing).
---snip---
qla2200 0000:00:0d.0: Found an ISP2200, irq 10, iobase 0xe0810000
qla2200 0000:00:0d.0: Configuring PCI space...
qla2200 0000:00:0d.0: Configure NVRAM parameters...
qla2200 0000:00:0d.0: Verifying loaded RISC code...
Error handler scsi_eh_0 sleeping
qla2200 0000:00:0d.0: LIP reset occured (f7f7).
qla2200 0000:00:0d.0: Waiting for LIP to complete...
qla2200 0000:00:0d.0: LIP occured (f7f7).
qla2200 0000:00:0d.0: LOOP UP detected (1 Gbps).
qla2200 0000:00:0d.0: Topology - (Loop), Host Loop address 0x7d
scsi0 : qla2xxx
qla2200 0000:00:0d.0:
QLogic Fibre Channel HBA Driver: 8.01.04-k-fw
QLogic QLA22xx -
ISP2200: PCI (33 MHz) @ 0000:00:0d.0 hdma-, host#=0, fw=2.02.08 TP
Vendor: COMPAQ Model: ARRAY CONTROLLER Rev: 2.60
Type: RAID ANSI SCSI revision: 02
Vendor: COMPAQ Model: LOGICAL VOLUME Rev: 2.60
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 83844000 512-byte hdwr sectors (42928 MB)
sda: Write Protect is off
sda: Mode Sense: 17 00 00 08
SCSI device sda: drive cache: write back
SCSI device sda: 83844000 512-byte hdwr sectors (42928 MB)
sda: Write Protect is off
sda: Mode Sense: 17 00 00 08
SCSI device sda: drive cache: write back
sda: sda1
sd 0:0:0:16384: Attached scsi disk sda
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
---snap---
uname -a
Linux test 2.6.16 #23 SMP Wed Mar 22 19:13:00 CET 2006 i686 GNU/Linux
The only modifications are in:
drivers/scsi/scsi_scan.c modification of the lun search code
I have now to program a clean patch, the currenty patch is a quick hack
which only supports this array and may break other devices.
I think, I need to invent a new BLIST_??? value to provide a clean
implementation.
Patch for 2.6.16 will follow soon.
Kind regards,
ingo flaschberger
geschaeftsleitung
crossip communications gmbH
------------------------------------------------------------------_------------
sebastian kneipp gasse 1 _____ _____ ____ _____ _____ (_)____
a-1020 wien / ___// ___// __ \ / ___// ___// // __ \
fix: +43-1-726 15 22-217 / /__ / / / /_/ /(__ )(__ )/ // /_/ /
fax: +43-1-726 15 22-111 \___//_/ \____//____//____//_// .___/
mob: +43-699-105 86 719 _______ / /
www.xip.at communications gmbh /______//_/
-------------------------------------------------------------------------------
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
