Re: Re:Re: problems with scsi_transport_fc and qla2xxx

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 02 Mar 2006, Maxim Kozover wrote:

> Today I tested disconnecting QLogic port.
> Adapter 4 is connected via switch to a storage and 3 LUNs are seen via
> the adapter.
> Only 1 rport is created (for FCP Target) while in Emulex case there
> were 3: (Fabric Port, Directory Server and FCP Target, FCP Initiator).

That's correct, we currently don't make an upcall for the SNS server
port nor the switch fabric port.

> # ls /sys/class/fc_remote_ports/
> rport-4:0-0
> # cat /sys/class/fc_remote_ports/*/roles
> FCP Target
> 
> Default dev_loss_tmo is 6 (1+5) while in Emulex case the default was 35.
> 
> After disconnecting the cable between the HBA and the switch
> qla2xxx 0000:03:01.0: LOOP DOWN detected (2).
>  rport-4:0-0: blocked FC remote port time out: removing target and saving binding
> 
> # ls /sys/class/fc_remote_ports/
> rport-4:0-0
> # cat /sys/class/fc_remote_ports/*/roles
> unknown
> 
> Relevant scsi devices are removed from /proc/scsi/scsi.
> 
> After reconnecting the cable
> qla2xxx 0000:03:01.0: LIP reset occured (f7f7).
> qla2xxx 0000:03:01.0: LOOP UP detected (2 Gbps).
> 
> # ls /sys/class/fc_remote_ports/
> rport-4:0-0
> # cat /sys/class/fc_remote_ports/*/roles
> FCP Target
> 
> However, scsi devices don't reappear in /proc/scsi/scsi.
> When I issue rescan, the command is stuck
> echo - - - > /sys/class/scsi_host/host4/scan
> 
> Please advise.

Could you add the enable-debug patch I sent you earlier and retry the
test?  Again forward the relevent snippets from var/log/messages.

Here's the patch again.

--
av

---

diff --git a/drivers/scsi/qla2xxx/qla_dbg.h b/drivers/scsi/qla2xxx/qla_dbg.h
index 935a59a..632f653 100644
--- a/drivers/scsi/qla2xxx/qla_dbg.h
+++ b/drivers/scsi/qla2xxx/qla_dbg.h
@@ -9,6 +9,7 @@
  */
 /* #define QL_DEBUG_LEVEL_1  */ /* Output register accesses to COM1 */
 /* #define QL_DEBUG_LEVEL_2  */ /* Output error msgs to COM1 */
+#define QL_DEBUG_LEVEL_2   /* Output error msgs to COM1 */
 /* #define QL_DEBUG_LEVEL_3  */ /* Output function trace msgs to COM1 */
 /* #define QL_DEBUG_LEVEL_4  */ /* Output NVRAM trace msgs to COM1 */
 /* #define QL_DEBUG_LEVEL_5  */ /* Output ring trace msgs to COM1 */
diff --git a/drivers/scsi/qla2xxx/qla_settings.h b/drivers/scsi/qla2xxx/qla_settings.h
index 363205c..b2e22b0 100644
--- a/drivers/scsi/qla2xxx/qla_settings.h
+++ b/drivers/scsi/qla2xxx/qla_settings.h
@@ -8,7 +8,7 @@
  * Compile time Options:
  *     0 - Disable and 1 - Enable
  */
-#define DEBUG_QLA2100		0	/* For Debug of qla2x00 */
+#define DEBUG_QLA2100		1	/* For Debug of qla2x00 */
 
 #define USE_ABORT_TGT		1	/* Use Abort Target mbx cmd */
 


-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux