On Fri, Nov 18 2005, Jens Axboe wrote: > On Fri, Nov 18 2005, mikem wrote: > > Patch 1 of 3 > > > > This patch fixes a bug that breaks hpacucli, a command line interface > > for the HP Array Config Utility. Without this fix the utility will > > not detect any controllers in the system. I thought I had already fixed > > this, but I guess not. > > > > Thanks to all who reported the issue. Please consider this this inclusion. > > Lovely, hope this makes it able to configure my drives on the tiger now > :). This sort-of makes it work. I get some complaints about unaligned access when setting up a test array: => controller slot=0 create type=logicaldrive drives=all raid=1 drivetype=sas .hpacucli(12458): unaligned access to 0x60000fffffcb370e, ip=0x40000000003c8550 => controller slot=0 create type=logicaldrive drives=all raid=1 drivetype=sata .hpacucli(12458): unaligned access to 0x60000fffffcb4aee, ip=0x40000000003c8550 .hpacucli(12458): unaligned access to 0x60000fffffcb370e, ip=0x40000000003c8550 .hpacucli(12458): unaligned access to 0x60000fffffcb370e, ip=0x40000000003c8550 Invoking hpacucli again later on makes it trigger a kobj warning: Badness in kref_get at lib/kref.c:32 Call Trace: [<a000000100013560>] show_stack+0x80/0xa0 sp=e0000001f5547b20 bsp=e0000001f5541250 [<a000000100013e30>] dump_stack+0x30/0x60 sp=e0000001f5547cf0 bsp=e0000001f5541238 [<a00000010034fec0>] kref_get+0xa0/0xc0 sp=e0000001f5547cf0 bsp=e0000001f5541218 [<a00000010034e470>] kobject_get+0x30/0x60 sp=e0000001f5547cf0 bsp=e0000001f55411f0 [<a00000010034eb80>] kobject_add+0x20/0x380 sp=e0000001f5547cf0 bsp=e0000001f55411b8 [<a0000001001b7ff0>] register_disk+0x70/0x200 sp=e0000001f5547cf0 bsp=e0000001f5541188 [<a0000001003385d0>] add_disk+0x90/0xc0 sp=e0000001f5547cf0 bsp=e0000001f5541168 [<a000000202e1aa40>] rebuild_lun_table+0xaa0/0xb20 [cciss] sp=e0000001f5547cf0 bsp=e0000001f55410a8 [<a000000202e1bbc0>] cciss_ioctl+0xa20/0x3be0 [cciss] sp=e0000001f5547d00 bsp=e0000001f5540fc0 [<a0000001003346b0>] blkdev_driver_ioctl+0xd0/0x160 sp=e0000001f5547e10 bsp=e0000001f5540f78 [<a000000100335050>] blkdev_ioctl+0x170/0xb40 sp=e0000001f5547e10 bsp=e0000001f5540f20 [<a000000100147cc0>] block_ioctl+0x40/0x60 sp=e0000001f5547e10 bsp=e0000001f5540ef0 [<a000000100160740>] do_ioctl+0x160/0x1a0 sp=e0000001f5547e10 bsp=e0000001f5540eb0 [<a000000100160880>] vfs_ioctl+0x100/0x8e0 sp=e0000001f5547e10 bsp=e0000001f5540e68 [<a0000001001610c0>] sys_ioctl+0x60/0xc0 sp=e0000001f5547e20 bsp=e0000001f5540de8 [<a00000010000bc80>] ia64_ret_from_syscall+0x0/0x20 sp=e0000001f5547e30 bsp=e0000001f5540de8 [<a000000000010640>] __kernel_syscall_via_break+0x0/0x20 sp=e0000001f5548000 bsp=e0000001f5540de8 -- Jens Axboe - : send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html