On Fri, 2005-08-05 at 07:36 -0700, Martin J. Bligh wrote: > Howcome it works on all mainline kernels, and not -mm then? ;-) > Did we fix an error path to detect failures, maybe? Well, OK, it might be something to do with your drives trying to negotiate IU and QAS. Support for this was added to the sym2 driver but never verified (because no-one seemed to have drives that could do it). The attached should stop the driver from negotiating these two parameters, if you could try it (it will produce complaints about static functions defined but not used, but you can ignore them). James diff --git a/drivers/scsi/sym53c8xx_2/sym_glue.c b/drivers/scsi/sym53c8xx_2/sym_glue.c --- a/drivers/scsi/sym53c8xx_2/sym_glue.c +++ b/drivers/scsi/sym53c8xx_2/sym_glue.c @@ -2122,10 +2122,12 @@ static struct spi_function_template sym2 .show_width = 1, .set_dt = sym2_set_dt, .show_dt = 1, +#if 0 .set_iu = sym2_set_iu, .show_iu = 1, .set_qas = sym2_set_qas, .show_qas = 1, +#endif .get_signalling = sym2_get_signalling, }; - : send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
