"Martin J. Bligh" <mbligh@xxxxxxxxxx> wrote: > > If you look on http://test.kernel.org/, you'll see in the rightmost > column there's a yellow box under elm3b70 for 2.6.13-rc4-mm1, but > current mainline kernels are all green (ie no problems). That means > one test failed, in this case making an fs on the spare partition. > Odd. I went digging ... Don't you know that testing stuff just creates more work? > Looks like this got introduced between 2.6.12-mm1 and 2.6.12-mm2 > Sorry, should've caught it earlier. I'll blame OLS or something. > This is an 8x power4 box running "bare metal" (ie not on top of > the hypervisor). sym2 works OK on my little test box with latest -mm lineup, and I have zero patches which touch that driver. James, could some of the scsi core rework have caused this? > seems /dev/sdc1 doesn't exist. > 07/31/05-02:44:32 processing command: (5) 'fs --partition=1 --mkext2fs --mount -l /mnt/tmp' > n format > PARTITION='/dev/sdc1' > mke2fs 1.35 (28-Feb-2004) > mkfs.ext2: No such device or address while trying to determine filesystem size > 07/31/05-02:44:32 fs: creating filesystem ext2 Failed rc = 1 > > Looking back at the bootlog (http://test.kernel.org/9609/debug/console.log), > I see it really not looking very happy (snapshot below). > > Good bootlog is here for comparsion: > (http://test.kernel.org/9445/debug/console.log) > > sym0: <1010-66> rev 0x1 at pci 0001:01:01.0 irq 115 > sym0: No NVRAM, ID 7, Fast-80, LVD, parity checking > sym0: SCSI BUS has been reset. > scsi0 : sym-2.2.1 > target0:0:8: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) > Vendor: IBM Model: IC35L036UCDY10-0 Rev: S25M > Type: Direct-Access ANSI SCSI revision: 03 > target0:0:8: tagged command queuing enabled, command queue depth 16. > target0:0:8: Beginning Domain Validation > target0:0:8: asynchronous. > target0:0:8: wide asynchronous. > target0:0:8: FAST-80 WIDE SCSI 160.0 MB/s DT IU QAS (12.5 ns, offset 31) > sym0: unexpected disconnect > target0:0:8: Write Buffer failure 700ff > target0:0:8: Domain Validation Disabing Information Units > target0:0:8: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) > sym0: unexpected disconnect > target0:0:8: Write Buffer failure 700ff > target0:0:8: Domain Validation detected failure, dropping back > target0:0:8: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31) > target0:0:8: Ending Domain Validation > target0:0:9: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) > Vendor: IBM Model: IC35L036UCDY10-0 Rev: S25M > Type: Direct-Access ANSI SCSI revision: 03 > target0:0:9: tagged command queuing enabled, command queue depth 16. > target0:0:9: Beginning Domain Validation > target0:0:9: asynchronous. > target0:0:9: wide asynchronous. > target0:0:9: FAST-80 WIDE SCSI 160.0 MB/s DT IU QAS (12.5 ns, offset 31) > sym0: unexpected disconnect > target0:0:9: Write Buffer failure 700ff > target0:0:9: Domain Validation Disabing Information Units > target0:0:9: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) > sym0: unexpected disconnect > target0:0:9: Write Buffer failure 700ff > target0:0:9: Domain Validation detected failure, dropping back > target0:0:9: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31) > target0:0:9: Ending Domain Validation > target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 31) > Vendor: IBM Model: IC35L036UCDY10-0 Rev: S25M > Type: Direct-Access ANSI SCSI revision: 03 > target0:0:10: tagged command queuing enabled, command queue depth 16. > target0:0:10: Beginning Domain Validation > target0:0:10: asynchronous. > target0:0:10: wide asynchronous. > target0:0:10: Domain Validation skipping write tests > target0:0:10: FAST-80 WIDE SCSI 160.0 MB/s DT IU QAS (12.5 ns, offset 31) > sym0: unexpected disconnect > target0:0:10: Domain Validation Disabing Information Units > target0:0:10: FAST-80 WIDE SCSI 160.0 MB/s DT (12.5 ns, offset 31) > sym0: unexpected disconnect > target0:0:10: Domain Validation detected failure, dropping back > target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31) > target0:0:10: Ending Domain Validation > Vendor: IBM Model: HSBPM2 PU2SCSI Rev: 0016 > Type: Enclosure ANSI SCSI revision: 02 > target0:0:14: Beginning Domain Validation > 0:0:14:0: phase change 6-7 9@100503a8 resid=7. > 0:0:14:0: phase change 6-7 9@100503a8 resid=7. > 0:0:14:0: phase change 6-7 9@100503a8 resid=7. > 0:0:14:0: phase change 6-7 9@100503a8 resid=7. > target0:0:14: Ending Domain Validation > Vendor: IBM Model: HSBPD4M PU3SCSI Rev: 0016 > Type: Enclosure ANSI SCSI revision: 02 > target0:0:15: Beginning Domain Validation > 0:0:15:0: phase change 6-7 9@100503a8 resid=7. > 0:0:15:0: phase change 6-7 9@100503a8 resid=7. > 0:0:15:0: phase change 6-7 9@100503a8 resid=7. > 0:0:15:0: phase change 6-7 9@100503a8 resid=7. > target0:0:15: Ending Domain Validation > sym1: <1010-66> rev 0x1 at pci 0001:01:01.1 irq 116 > sym1: No NVRAM, ID 7, Fast-80, LVD, parity checking > sym1: SCSI BUS has been reset. > scsi1 : sym-2.2.1 > sym2: <1010-66> rev 0x1 at pci 0001:41:01.0 irq 119 > sym2: No NVRAM, ID 7, Fast-80, LVD, parity checking > sym2: SCSI BUS has been reset. > scsi2 : sym-2.2.1 > sym3: <1010-66> rev 0x1 at pci 0001:41:01.1 irq 120 > sym3: No NVRAM, ID 7, Fast-80, LVD, parity checking > sym3: SCSI BUS has been reset. > scsi3 : sym-2.2.1 > st: Version 20050501, fixed bufsize 32768, s/g segs 256 > SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB) > SCSI device sda: drive cache: write through > SCSI device sda: 71096640 512-byte hdwr sectors (36401 MB) > SCSI device sda: drive cache: write through > sda: sda1 sda2 sda3 sda4 < sda5 sda6 > > Attached scsi disk sda at scsi0, channel 0, id 8, lun 0 > SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB) > SCSI device sdb: drive cache: write through > SCSI device sdb: 71096640 512-byte hdwr sectors (36401 MB) > SCSI device sdb: drive cache: write through > sdb: sdb1 sdb2 > Attached scsi disk sdb at scsi0, channel 0, id 9, lun 0 > target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31) > target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31) > target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31) > sdc: Unit Not Ready, sense: > : Current: sense key=0x0 > ASC=0x0 ASCQ=0x0 > target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31) > Device not ready. > target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31) > Device not ready. > target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31) > Device not ready. > sdc : READ CAPACITY failed. > sdc : status=1, message=00, host=0, driver=08 > sd: Current: sense key=0x0 > ASC=0x0 ASCQ=0x0 > target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31) > Device not ready. > sdc: asking for cache data failed > sdc: assuming drive cache: write through > target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31) > target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31) > target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31) > sdc: Unit Not Ready, sense: > : Current: sense key=0x0 > ASC=0x0 ASCQ=0x0 > target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31) > Device not ready. > target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31) > Device not ready. > target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31) > Device not ready. > sdc : READ CAPACITY failed. > sdc : status=1, message=00, host=0, driver=08 > sd: Current: sense key=0x0 > ASC=0x0 ASCQ=0x0 > target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31) > Device not ready. > sdc: asking for cache data failed > sdc: assuming drive cache: write through > sdc:<6> target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31) > Device sdc not ready. > end_request: I/O error, dev sdc, sector 0 > Buffer I/O error on device sdc, logical block 0 > target0:0:10: FAST-40 WIDE SCSI 80.0 MB/s DT (25 ns, offset 31) > Device sdc not ready. > end_request: I/O error, dev sdc, sector 0 > Buffer I/O error on device sdc, logical block 0 > unable to read partition table - : send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
