On 12/12/2024 22:09, Markuss Broks wrote: > Hey, > > This series adds support for the Samsung SPEEDY serial bus host > controller. Samsung SPEEDY (actually an acronym) is a proprietary > Samsung 1 wire serial bus, which is used on various Samsung devices. > It does not look like you tested the bindings, at least after quick look. Please run `make dt_binding_check` (see Documentation/devicetree/bindings/writing-schema.rst for instructions). Maybe you need to update your dtschema and yamllint. It does not look like you tested the DTS against bindings. Please run `make dtbs_check W=1` (see Documentation/devicetree/bindings/writing-schema.rst or https://www.linaro.org/blog/tips-and-tricks-for-validating-devicetree-sources-with-the-devicetree-schema/ for instructions). Please run standard kernel tools for static analysis, like coccinelle, smatch and sparse, and fix reported warnings. Also please check for warnings when building with W=1. Most of these commands (checks or W=1 build) can build specific targets, like some directory, to narrow the scope to only your code. The code here looks like it needs a fix. Feel free to get in touch if the warning is not clear. Please run scripts/checkpatch.pl and fix reported warnings. Then please run `scripts/checkpatch.pl --strict` and (probably) fix more warnings. Some warnings can be ignored, especially from --strict run, but the code here looks like it needs a fix. Feel free to get in touch if the warning is not clear. Best regards, Krzysztof
