Re: [PATCH 1/3] dt-bindings: soc: samsung: exynos-speedy: Document SPEEDY host controller bindings

[Krzysztof Kozlowski <krzk@xxxxxxxxxx>]

On 12/12/2024 22:09, Markuss Broks wrote:
> Add the schema for the Samsung SPEEDY serial bus host controller.
> The bus has 4 bit wide addresses for addressing devices
> and 8 bit wide register addressing. Each register is also 8
> bit long, so the address can be 0-f (hexadecimal), node name
> for child device follows the format: node_name@[0-f].


This wasn't tested so limited review.

A nit, subject: drop second/last, redundant "bindings". The
"dt-bindings" prefix is already stating that these are bindings.
See also:
https://elixir.bootlin.com/linux/v6.7-rc8/source/Documentation/devicetree/bindings/submitting-patches.rst#L18

> 
> Co-developed-by: Maksym Holovach <nergzd@xxxxxxxxxxxxx>
> Signed-off-by: Maksym Holovach <nergzd@xxxxxxxxxxxxx>
> Signed-off-by: Markuss Broks <markuss.broks@xxxxxxxxx>
> ---
>  .../bindings/soc/samsung/exynos-speedy.yaml        | 78 ++++++++++++++++++++++

Filename must match compatible.

>  1 file changed, 78 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/soc/samsung/exynos-speedy.yaml b/Documentation/devicetree/bindings/soc/samsung/exynos-speedy.yaml
> new file mode 100644
> index 0000000000000000000000000000000000000000..304b322a74ea70f23d8c072b44b6ca86b7cc807f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/soc/samsung/exynos-speedy.yaml
> @@ -0,0 +1,78 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/soc/samsung/exynos-speedy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung Exynos SPEEDY serial bus host controller

Speedy or SPEEDY?

> +
> +maintainers:
> +  - Markuss Broks <markuss.broks@xxxxxxxxx>
> +
> +description:
> +  Samsung SPEEDY is a proprietary Samsung serial 1-wire bus.

1-wire? But not compatible with w1 (onwire)?

> +  It is used on various Samsung Exynos chips. The bus can
> +  address at most 4 bit (16) devices. The devices on the bus
> +  have 8 bit long register line, and the registers are also
> +  8 bit long each. It is typically used for communicating with
> +  Samsung PMICs (s2mps17, s2mps18, ...) and other Samsung chips,
> +  such as RF parts.
> +
> +properties:
> +  compatible:
> +    - items:
> +        - enum:
> +            - samsung,exynos9810-speedy
> +        - const: samsung,exynos-speedy

Drop last compatible and use only SoC specific.

> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    - const: pclk

Drop clock-names, not needed for one entry.

> +
> +  interrupts:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#address-cells"
> +  - "#size-cells"

You do not have them in the properties, anyway required goes before
additionalProperties

> +
> +patternProperties:
> +  "^[a-z][a-z0-9]*@[0-9a-f]$":

That's odd regex. Look at other bus bindings.

> +    type: object
> +    additionalProperties: true
> +
> +    properties:
> +      reg:
> +        maxItems: 1

maximum: 15

> +
> +    required:
> +      - reg
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    speedy0: speedy@141c0000 {

Drop unused label.

> +      compatible = "samsung,exynos9810-speedy",
> +                   "samsung-exynos-speedy";
> +      reg = <0x141c0000 0x2000>;
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +

No resources? No clocks? No interrupts?



Best regards,
Krzysztof