On 27-11-24, 10:58, André Draszik wrote:
> gs101's SS phy needs to be configured differently based on the
> connector orientation, as the SS link can only be established if the
> mux is configured correctly.
>
> The code to handle programming of the mux is in place already, this commit
> now adds the missing pieces to subscribe to the Type-C orientation
> switch event.
>
> Note that for this all to work we rely on the USB controller
> re-initialising us. It should invoke our .exit() upon cable unplug, and
> during cable plug we'll receive the orientation event after which we
> expect our .init() to be called.
>
> Above reinitialisation happens if the DWC3 controller can enter runtime
> suspend automatically. For the DWC3 driver, this is an opt-in:
> echo auto > /sys/devices/.../11110000.usb/power/control
> Once done, things work as long as the UDC is not bound as otherwise it
> stays busy because it doesn't cancel / stop outstanding TRBs. For now
> we have to manually unbind the UDC in that case:
> echo "" > sys/kernel/config/usb_gadget/.../UDC
>
> Signed-off-by: André Draszik <andre.draszik@xxxxxxxxxx>
> ---
> drivers/phy/samsung/Kconfig | 1 +
> drivers/phy/samsung/phy-exynos5-usbdrd.c | 60 ++++++++++++++++++++++++++++++++
> 2 files changed, 61 insertions(+)
>
> diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig
> index f10afa3d7ff5..fc7bd1088576 100644
> --- a/drivers/phy/samsung/Kconfig
> +++ b/drivers/phy/samsung/Kconfig
> @@ -80,6 +80,7 @@ config PHY_EXYNOS5_USBDRD
> tristate "Exynos5 SoC series USB DRD PHY driver"
> depends on (ARCH_EXYNOS && OF) || COMPILE_TEST
> depends on HAS_IOMEM
> + depends on TYPEC || (TYPEC=n && COMPILE_TEST)
> depends on USB_DWC3_EXYNOS
> select GENERIC_PHY
> select MFD_SYSCON
> diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
> index 1a34e9b4618a..2010d25ee817 100644
> --- a/drivers/phy/samsung/phy-exynos5-usbdrd.c
> +++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c
> @@ -394,6 +394,7 @@ struct exynos5_usbdrd_phy_drvdata {
> * @extrefclk: frequency select settings when using 'separate
> * reference clocks' for SS and HS operations
> * @regulators: regulators for phy
> + * @sw: TypeC orientation switch handle
> * @orientation: TypeC connector orientation - normal or flipped
> */
> struct exynos5_usbdrd_phy {
> @@ -415,6 +416,7 @@ struct exynos5_usbdrd_phy {
> u32 extrefclk;
> struct regulator_bulk_data *regulators;
>
> + struct typec_switch_dev *sw;
> enum typec_orientation orientation;
> };
>
> @@ -1400,6 +1402,60 @@ static int exynos5_usbdrd_phy_clk_handle(struct exynos5_usbdrd_phy *phy_drd)
> return 0;
> }
>
> +#if IS_ENABLED(CONFIG_TYPEC)
> +static int exynos5_usbdrd_orien_sw_set(struct typec_switch_dev *sw,
> + enum typec_orientation orientation)
> +{
> + struct exynos5_usbdrd_phy *phy_drd = typec_switch_get_drvdata(sw);
> +
> + scoped_guard(mutex, &phy_drd->phy_mutex)
> + phy_drd->orientation = orientation;
> +
> + return 0;
> +}
> +
> +static void exynos5_usbdrd_orien_switch_unregister(void *data)
> +{
> + struct exynos5_usbdrd_phy *phy_drd = data;
> +
> + typec_switch_unregister(phy_drd->sw);
> +}
> +
> +static int exynos5_usbdrd_setup_notifiers(struct exynos5_usbdrd_phy *phy_drd)
> +{
> + int ret;
> +
> + phy_drd->orientation = (enum typec_orientation)-1;
Should this be TYPEC_ORIENTATION_NONE?
> + if (device_property_present(phy_drd->dev, "orientation-switch")) {
> + struct typec_switch_desc sw_desc = { };
> +
> + sw_desc.drvdata = phy_drd;
> + sw_desc.fwnode = dev_fwnode(phy_drd->dev);
> + sw_desc.set = exynos5_usbdrd_orien_sw_set;
> +
> + phy_drd->sw = typec_switch_register(phy_drd->dev, &sw_desc);
> + if (IS_ERR(phy_drd->sw))
> + return dev_err_probe(phy_drd->dev,
> + PTR_ERR(phy_drd->sw),
> + "Failed to register TypeC orientation switch\n");
> +
> + ret = devm_add_action_or_reset(phy_drd->dev,
> + exynos5_usbdrd_orien_switch_unregister,
> + phy_drd);
> + if (ret)
> + return dev_err_probe(phy_drd->dev, ret,
> + "Failed to register TypeC orientation devm action\n");
> + }
> +
> + return 0;
> +}
> +#else /* CONFIG_TYPEC */
> +static int exynos5_usbdrd_setup_notifiers(struct exynos5_usbdrd_phy *phy_drd)
> +{
> + return 0;
> +}
> +#endif /* CONFIG_TYPEC */
> +
> static const struct exynos5_usbdrd_phy_config phy_cfg_exynos5[] = {
> {
> .id = EXYNOS5_DRDPHY_UTMI,
> @@ -1789,6 +1845,10 @@ static int exynos5_usbdrd_phy_probe(struct platform_device *pdev)
> if (ret)
> return dev_err_probe(dev, ret, "failed to get regulators\n");
>
> + ret = exynos5_usbdrd_setup_notifiers(phy_drd);
> + if (ret)
> + return ret;
> +
> dev_vdbg(dev, "Creating usbdrd_phy phy\n");
>
> for (i = 0; i < EXYNOS5_DRDPHYS_NUM; i++) {
>
> --
> 2.47.0.338.g60cca15819-goog
--
~Vinod
