This code's intention is to configure lane0 and lane2 tunings, but for
lane2 there is a typo and it ends up tuning something else.
Fix the typo, as it doesn't appear to make sense to apply different
tunings for lane0 vs lane2.
The same typo appears to exist in the bootloader, hence we restore the
original value in the typo'd registers as well. This can be removed
once / if the bootloader is updated.
Note that this is incorrect in the downstream driver as well - the
values had been copied from there.
Reviewed-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
Tested-by: Peter Griffin <peter.griffin@xxxxxxxxxx>
Signed-off-by: André Draszik <andre.draszik@xxxxxxxxxx>
---
v2:
* collect tags
---
drivers/phy/samsung/phy-exynos5-usbdrd.c | 7 +++++--
1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
index ceae4b47cece..2a724d362c2d 100644
--- a/drivers/phy/samsung/phy-exynos5-usbdrd.c
+++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c
@@ -1510,8 +1510,11 @@ static const struct exynos5_usbdrd_phy_tuning gs101_tunes_pipe3_preinit[] = {
PHY_TUNING_ENTRY_PMA(0x09e0, -1, 0x00),
PHY_TUNING_ENTRY_PMA(0x09e4, -1, 0x36),
PHY_TUNING_ENTRY_PMA(0x1e7c, -1, 0x06),
- PHY_TUNING_ENTRY_PMA(0x1e90, -1, 0x00),
- PHY_TUNING_ENTRY_PMA(0x1e94, -1, 0x36),
+ PHY_TUNING_ENTRY_PMA(0x19e0, -1, 0x00),
+ PHY_TUNING_ENTRY_PMA(0x19e4, -1, 0x36),
+ /* fix bootloader bug */
+ PHY_TUNING_ENTRY_PMA(0x1e90, -1, 0x02),
+ PHY_TUNING_ENTRY_PMA(0x1e94, -1, 0x0b),
/* improve LVCC */
PHY_TUNING_ENTRY_PMA(0x08f0, -1, 0x30),
PHY_TUNING_ENTRY_PMA(0x18f0, -1, 0x30),
--
2.47.0.338.g60cca15819-goog
