Add nodes for serial_0 (UART_DBG) and serial_1 (UART_BT), which
allows using them.
Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
---
arch/arm64/boot/dts/exynos/exynos8895.dtsi | 26 ++++++++++++++++++++++
1 file changed, 26 insertions(+)
diff --git a/arch/arm64/boot/dts/exynos/exynos8895.dtsi b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
index e6c8a4966..ad50cd4f6 100644
--- a/arch/arm64/boot/dts/exynos/exynos8895.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
@@ -218,6 +218,19 @@ cmu_peric0: clock-controller@10400000 {
"usi1", "usi2", "usi3";
};
+ serial_0: serial@10430000 {
+ compatible = "samsung,exynos8895-uart";
+ reg = <0x10430000 0x100>;
+ clocks = <&cmu_peric0 CLK_GOUT_PERIC0_UART_DBG_PCLK>,
+ <&cmu_peric0 CLK_GOUT_PERIC0_UART_DBG_EXT_UCLK>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 385 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_bus>;
+ samsung,uart-fifosize = <256>;
+ status = "disabled";
+ };
+
pinctrl_peric0: pinctrl@104d0000 {
compatible = "samsung,exynos8895-pinctrl";
reg = <0x104d0000 0x1000>;
@@ -250,6 +263,19 @@ cmu_peric1: clock-controller@10800000 {
"usi10", "usi11", "usi12", "usi13";
};
+ serial_1: serial@10830000 {
+ compatible = "samsung,exynos8895-uart";
+ reg = <0x10830000 0x100>;
+ clocks = <&cmu_peric1 CLK_GOUT_PERIC1_UART_BT_PCLK>,
+ <&cmu_peric1 CLK_GOUT_PERIC1_UART_BT_EXT_UCLK>;
+ clock-names = "uart", "clk_uart_baud0";
+ interrupts = <GIC_SPI 389 IRQ_TYPE_LEVEL_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart1_bus>;
+ samsung,uart-fifosize = <256>;
+ status = "disabled";
+ };
+
pinctrl_peric1: pinctrl@10980000 {
compatible = "samsung,exynos8895-pinctrl";
reg = <0x10980000 0x1000>;
--
2.43.0
