In the s3c64xx_flush_fifo() code, the loops counter is post-decremented
in the do { } while(test && loops--) condition. This means the loops is
left at the unsigned equivalent of -1 if the loop times out. The test
after will never pass as if tests for loops == 0.
Signed-off-by: Ben Dooks <ben.dooks@xxxxxxxxxxxxxxx>
---
drivers/spi/spi-s3c64xx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index 833c58c88e40..6ab416a33966 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -245,7 +245,7 @@ static void s3c64xx_flush_fifo(struct s3c64xx_spi_driver_data *sdd)
loops = msecs_to_loops(1);
do {
val = readl(regs + S3C64XX_SPI_STATUS);
- } while (TX_FIFO_LVL(val, sdd) && loops--);
+ } while (TX_FIFO_LVL(val, sdd) && --loops);
if (loops == 0)
dev_warn(&sdd->pdev->dev, "Timed out flushing TX FIFO\n");
@@ -258,7 +258,7 @@ static void s3c64xx_flush_fifo(struct s3c64xx_spi_driver_data *sdd)
readl(regs + S3C64XX_SPI_RX_DATA);
else
break;
- } while (loops--);
+ } while (--loops);
if (loops == 0)
dev_warn(&sdd->pdev->dev, "Timed out flushing RX FIFO\n");
--
2.37.2.352.g3c44437643
