Re: [PATCH v4 22/27] arm64: dts: qcom: starqltechn: add max77705 PMIC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Sep 13, 2024 at 06:08:05PM +0300, Dzmitry Sankouski wrote:
> Add support for max77705 MFD device. Supported sub-devices:
>  charger, fuelgauge, haptic, led
> 
> Signed-off-by: Dzmitry Sankouski <dsankouski@xxxxxxxxx>
> ---
>  .../boot/dts/qcom/sdm845-samsung-starqltechn.dts   | 103 +++++++++++++++++++++
>  1 file changed, 103 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
> index a3bd5231569d..865253d8f0c7 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
> @@ -18,6 +18,16 @@ / {
>  	model = "Samsung Galaxy S9 SM-G9600";
>  	compatible = "samsung,starqltechn", "qcom,sdm845";
>  
> +	battery: battery {
> +		compatible = "simple-battery";
> +		constant-charge-current-max-microamp = <2150000>;
> +		charge-full-design-microamp-hours = <3000000>;
> +
> +		over-voltage-threshold-microvolt = <4500000>;
> +		voltage-min-design-microvolt = <3400000>;
> +		voltage-max-design-microvolt = <4350000>;
> +	};
> +
>  	chosen {
>  		#address-cells = <2>;
>  		#size-cells = <2>;
> @@ -90,6 +100,27 @@ key-wink {
>  			debounce-interval = <15>;
>  		};
>  	};
> +
> +	vib_regulator: gpio-regulator {

Please use name for all fixed regulators which matches current format
recommendation: 'regulator-[0-9]v[0-9]'
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/regulator/fixed-regulator.yaml?h=v6.11-rc1#n46

> +		compatible = "regulator-fixed";
> +		regulator-name = "haptic";
> +		regulator-min-microvolt = <1800000>;
> +		regulator-max-microvolt = <1800000>;
> +		regulator-boot-on;
> +		enable-active-high;
> +		gpio = <&pm8998_gpios 18 GPIO_ACTIVE_HIGH>;
> +	};
> +
> +	vib_pwm: pwm {
> +		#pwm-cells = <2>;
> +		compatible = "clk-pwm";

compatible is always the first property. See DTS coding style.

> +		clocks = <&gcc GCC_GP1_CLK>;
> +		assigned-clock-parents = <&rpmhcc RPMH_CXO_CLK>;
> +		assigned-clocks = <&gcc GCC_GP1_CLK_SRC>;
> +		pinctrl-0 = <&motor_pwm_default_state>;
> +		pinctrl-1 = <&motor_pwm_suspend_state>;
> +		pinctrl-names = "default", "suspend";
> +	};
>  };
>  
>  
> @@ -385,10 +416,66 @@ &qupv3_id_1 {
>  	status = "okay";
>  };
>  
> +&gpi_dma1 {
> +	status = "okay";
> +};
> +
>  &uart9 {
>  	status = "okay";
>  };
>  
> +&i2c14 {
> +	status = "okay";
> +
> +	pmic@66 {
> +		compatible = "maxim,max77705";
> +		reg = <0x66>;
> +		interrupt-parent = <&pm8998_gpios>;
> +		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
> +		pinctrl-0 = <&chg_int_default>;
> +		pinctrl-names = "default";
> +
> +		leds {
> +			compatible = "maxim,max77705-led";
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +
> +			led@1 {
> +				reg = <1>;
> +				label = "red:usr1";
> +			};
> +
> +			led@2 {
> +				reg = <2>;
> +				label = "green:usr2";
> +			};
> +
> +			led@3 {
> +				reg = <3>;
> +				label = "blue:usr3";
> +			};
> +		};
> +
> +		max77705_charger: charger {
> +			compatible = "maxim,max77705-charger";
> +			monitored-battery = <&battery>;
> +		};
> +
> +		fuel_gauge {

No underscores in node names. See DTS coding style.

Best regards,
Krzysztof





[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux