Subject: [PATCH v6 0/4] initial clock support for exynosauto v920 SoC This patchset adds initial clock driver support for Exynos Auto v920 SoC. This driver uses HW Auto Clock gating. So all gate clocks did not register. Below CMU blocks are supported in this patchset and remains will be implemented later. - CMU_TOP - CMU_PERIC0/1 - CMU_MISC - CMU_HSI0/1 Changes in v7: - Combine duplicate clock description Changes in v6: - Add peric1, mis and hsi0/1 in the bindings document Changes in v5: - Change CMU_TOP odd numbering - Move the descriptions and names common clocks properties Changes in v4: - Change PLL_531x fdiv type and mask bit - Change PLL_531x mdiv type Changes in v3: - Change SoC name from Exynos Auto to ExynosAuto - Change the makefile order to the bottom of exynosautov9 - Add PLL_531x formula for integer PLL Changes in v2: - Fix typo from v209 to v920 - Change USI clock to appropriate - Merge headers into binding patches - Change clock-name to the recommended name Kwanghoon Son (1): clk: samsung: exynosautov9: add dpum clock support Sunyeal Hong (4): dt-bindings: clock: add ExynosAuto v920 SoC CMU bindings arm64: dts: exynos: add initial CMU clock nodes in ExynosAuto v920 clk: samsung: clk-pll: Add support for pll_531x clk: samsung: add top clock support for ExynosAuto v920 SoC .../clock/samsung,exynosautov920-clock.yaml | 162 +++ .../arm64/boot/dts/exynos/exynosautov920.dtsi | 40 +- drivers/clk/samsung/Makefile | 1 + drivers/clk/samsung/clk-exynosautov9.c | 83 ++ drivers/clk/samsung/clk-exynosautov920.c | 1173 +++++++++++++++++ drivers/clk/samsung/clk-pll.c | 44 + drivers/clk/samsung/clk-pll.h | 1 + .../clock/samsung,exynosautov920.h | 191 +++ 8 files changed, 1682 insertions(+), 13 deletions(-) create mode 100644 Documentation/devicetree/bindings/clock/samsung,exynosautov920-clock.yaml create mode 100644 drivers/clk/samsung/clk-exynosautov920.c create mode 100644 include/dt-bindings/clock/samsung,exynosautov920.h -- 2.45.2
