Re: [PATCH v1 08/10] arm64: dts: exynos: Add initial support for exynos8895 SoC

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 07/08/2024 10:28, ivo.ivanov.ivanov1@xxxxxxxxx wrote:
> From: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
> 
> Exynos 8895 SoC is an ARMv8 mobile SoC found in the Samsung Galaxy
> S8 (dreamlte), S8 Plus (dream2lte), Note 8 (greatlte) and the Meizu
> 15 Plus (m1891). Add minimal support for that SoC, including:
> 
> - All 8 cores via PSCI
> - ChipID
> - Generic ARMV8 Timer
> - Enumarate all pinctrl nodes
> 
> Further platform support will be added over time.
> 
> Signed-off-by: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
> ---
>  .../boot/dts/exynos/exynos8895-pinctrl.dtsi   | 1378 +++++++++++++++++
>  arch/arm64/boot/dts/exynos/exynos8895.dtsi    |  253 +++
>  2 files changed, 1631 insertions(+)
>  create mode 100644 arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
>  create mode 100644 arch/arm64/boot/dts/exynos/exynos8895.dtsi
> 
> diff --git a/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
> new file mode 100644
> index 000000000..1dcb61e2e
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
> @@ -0,0 +1,1378 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Samsung's Exynos 8895 SoC pin-mux and pin-config device tree source
> + *
> + * Copyright (c) 2024, Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include "exynos-pinctrl.h"
> +
> +&pinctrl_alive {
> +	gpa0: gpa0 {

I do not believe this was tested. See maintainer SoC profile for Samsung
Exynos.

Limited review follows due to lack of testing.


> +};
> diff --git a/arch/arm64/boot/dts/exynos/exynos8895.dtsi b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
> new file mode 100644
> index 000000000..3ed381ee5
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos8895.dtsi
> @@ -0,0 +1,253 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Samsung's Exynos 8895 SoC device tree source
> + *
> + * Copyright (c) 2024, Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx>
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +/ {
> +	compatible = "samsung,exynos8895";
> +	#address-cells = <2>;
> +	#size-cells = <1>;
> +
> +	interrupt-parent = <&gic>;
> +
> +	aliases {
> +		pinctrl0 = &pinctrl_alive;
> +		pinctrl1 = &pinctrl_abox;
> +		pinctrl2 = &pinctrl_vts;
> +		pinctrl3 = &pinctrl_fsys0;
> +		pinctrl4 = &pinctrl_fsys1;
> +		pinctrl5 = &pinctrl_busc;
> +		pinctrl6 = &pinctrl_peric0;
> +		pinctrl7 = &pinctrl_peric1;
> +	};
> +
> +	arm-a53-pmu {

Are there two pmus?

> +		compatible = "arm,cortex-a53-pmu";
> +		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
> +		interrupt-affinity = <&cpu0>,
> +				     <&cpu1>,
> +				     <&cpu2>,
> +				     <&cpu3>,
> +				     <&cpu4>,
> +				     <&cpu5>,
> +				     <&cpu6>,
> +				     <&cpu7>;
> +	};
> +
> +	cpus {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		cpu-map {
> +			cluster0 {
> +				core0 {
> +					cpu = <&cpu0>;
> +				};
> +				core1 {
> +					cpu = <&cpu1>;
> +				};
> +				core2 {
> +					cpu = <&cpu2>;
> +				};
> +				core3 {
> +					cpu = <&cpu3>;
> +				};
> +			};
> +
> +			cluster1 {
> +				core0 {
> +					cpu = <&cpu4>;
> +				};
> +				core1 {
> +					cpu = <&cpu5>;
> +				};
> +				core2 {
> +					cpu = <&cpu6>;
> +				};
> +				core3 {
> +					cpu = <&cpu7>;
> +				};
> +			};
> +		};
> +
> +		cpu0: cpu@100 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x100>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu1: cpu@101 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x101>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu2: cpu@102 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x102>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu3: cpu@103 {
> +			device_type = "cpu";
> +			compatible = "arm,cortex-a53";
> +			reg = <0x103>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu4: cpu@0 {
> +			device_type = "cpu";
> +			compatible = "samsung,mongoose-m2";
> +			reg = <0x0>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu5: cpu@1 {
> +			device_type = "cpu";
> +			compatible = "samsung,mongoose-m2";
> +			reg = <0x1>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu6: cpu@2 {
> +			device_type = "cpu";
> +			compatible = "samsung,mongoose-m2";
> +			reg = <0x2>;
> +			enable-method = "psci";
> +		};
> +
> +		cpu7: cpu@3 {
> +			device_type = "cpu";
> +			compatible = "samsung,mongoose-m2";
> +			reg = <0x3>;
> +			enable-method = "psci";
> +		};
> +	};
> +
> +	psci {
> +		compatible = "arm,psci";
> +		method = "smc";
> +		cpu_suspend = <0xc4000001>;
> +		cpu_off = <0x84000002>;
> +		cpu_on = <0xc4000003>;
> +	};
> +
> +	timer {
> +		compatible = "arm,armv8-timer";
> +		/* Hypervisor Virtual Timer interrupt is not wired to GIC */
> +		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
> +			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
> +		clock-frequency = <26000000>;

Hm? I think this was explicitly disallowed.

> +	};
> +
> +	fixed-rate-clocks {

Keep order of properties, just like DTS coding style asks.

Anyway, fixed-rate-clocks wrapper is not needed, drop.

> +		oscclk: osc-clock {
> +			compatible = "fixed-clock";
> +			#clock-cells = <0>;
> +			clock-output-names = "oscclk";
> +		};
> +	};
> +
> +	soc: soc@0 {
> +		compatible = "simple-bus";
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		ranges = <0x0 0x0 0x0 0x20000000>;
> +
> +		chipid@10000000 {
> +			compatible = "samsung,exynos8895-chipid",
> +				     "samsung,exynos850-chipid";
> +			reg = <0x10000000 0x24>;
> +		};
> +
> +		gic: interrupt-controller@10200000 {
> +			compatible = "arm,gic-400";
> +			#interrupt-cells = <3>;
> +			#address-cells = <0>;
> +			interrupt-controller;
> +			reg = <0x10201000 0x1000>,
> +			      <0x10202000 0x1000>,
> +			      <0x10204000 0x2000>,
> +			      <0x10206000 0x2000>;
> +			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
> +						 IRQ_TYPE_LEVEL_HIGH)>;
> +		};
> +
> +		pinctrl_alive: pinctrl@164b0000 {
> +			compatible = "samsung,exynos8895-pinctrl";
> +			reg = <0x164b0000 0x1000>;
> +
> +			wakeup-interrupt-controller {
> +				compatible = "samsung,exynos8895-wakeup-eint",
> +					     "samsung,exynos7-wakeup-eint";
> +				interrupt-parent = <&gic>;
> +				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
> +			};
> +		};
> +
> +		pinctrl_abox: pinctrl@13e60000 {

This does not look ordered. See DTS coding style.

Best regards,
Krzysztof





[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux