Unfortunately, it turned out that I have an issue with my git configuration. I'm sorry for the inconvenience, I'll resend a V2 without the sendemail.from. On 8/7/24 11:28, ivo.ivanov.ivanov1@xxxxxxxxx wrote: > From: Ivaylo Ivanov <ivo.ivanov.ivanov1@xxxxxxxxx> > > Hi folks, > > This series adds initial SoC support for the Exynos 8895 SoC and also > initial board support for Samsung Galaxy S8 phone (SM-G950F), codenamed > dreamlte. > > The Exynos 8895 SoC is also used in S8 Plus (dream2lte), Note 8 (greatlte) > and Meizu 15 Plus (m1891). Currently DT is added for the Exynos 8895 SoC > and dreamlte, but it should be really easy to adapt for the other devices > with the same SoC. > > The support added in this series consists of: > * cpus > * pinctrl > * gpio > * simple-framebuffer > * pstore > > This is enough to reach a minimal initramfs shell using an upstream kernel. > More platform support will be added in the future. > > The preferred way to boot this device is by using a small shim bl called > uniLoader [1], which packages the mainline kernel and DT and jumps to > the kernel. This is done in order to work around some issues caused by > the stock, and non-replacable Samsung S-Boot bootloader. For example, > S-Boot leaves the decon trigger control unset, which causes the framebuffer > to not refresh. > > [1] https://github.com/ivoszbg/uniLoader > > Kind regards, > > Ivaylo. > > Ivaylo Ivanov (10): > dt-bindings: arm: cpus: Add Samsung Mongoose M2 > dt-bindings: hwinfo: samsung,exynos-chipid: add exynos8895 compatible > soc: samsung: exynos-chipid: add exynos8895 SoC support > dt-bindings: pinctrl: samsung: Add compatible for Exynos8895 SoC > pinctrl: samsung: Add exynos8895 SoC pinctrl configuration > dt-bindings: pinctrl: samsung: add exynos8895-wakeup-eint compatible > dt-bindings: soc: samsung: exynos-pmu: Add exynos8895 compatible > arm64: dts: exynos: Add initial support for exynos8895 SoC > dt-bindings: arm: samsung: Document dreamlte board binding > arm64: dts: exynos: Add initial support for Samsung Galaxy S8 > > .../devicetree/bindings/arm/cpus.yaml | 1 + > .../bindings/arm/samsung/samsung-boards.yaml | 6 + > .../hwinfo/samsung,exynos-chipid.yaml | 1 + > .../samsung,pinctrl-wakeup-interrupt.yaml | 1 + > .../bindings/pinctrl/samsung,pinctrl.yaml | 1 + > .../bindings/soc/samsung/exynos-pmu.yaml | 1 + > arch/arm64/boot/dts/exynos/Makefile | 1 + > .../boot/dts/exynos/exynos8895-dreamlte.dts | 126 ++ > .../boot/dts/exynos/exynos8895-pinctrl.dtsi | 1378 +++++++++++++++++ > arch/arm64/boot/dts/exynos/exynos8895.dtsi | 253 +++ > .../pinctrl/samsung/pinctrl-exynos-arm64.c | 137 ++ > drivers/pinctrl/samsung/pinctrl-exynos.h | 10 + > drivers/pinctrl/samsung/pinctrl-samsung.c | 2 + > drivers/pinctrl/samsung/pinctrl-samsung.h | 1 + > drivers/soc/samsung/exynos-chipid.c | 1 + > 15 files changed, 1920 insertions(+) > create mode 100644 arch/arm64/boot/dts/exynos/exynos8895-dreamlte.dts > create mode 100644 arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi > create mode 100644 arch/arm64/boot/dts/exynos/exynos8895.dtsi >
