[PATCH v2 5/6] ARM: dts: samsung: exynos4212-tab3: Drop interrupt from WM1811 codec

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This was initially copied from the Midas DTSI, but there is no
proof that the same interrupt is also used on the Tab 3. The pin
listed as the interrupt here is GPIO_HDMI_CEC on the Midas,
but for the Tab 3 it is the headset button GPIO - GPIO_EAR_SEND_END.

Drop the interrupt, since there is no proof that it is used.

Signed-off-by: Artur Weber <aweber.kernel@xxxxxxxxx>
---
 arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi | 2 --
 1 file changed, 2 deletions(-)

diff --git a/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
index 5106bb752b7d..70e3091062f9 100644
--- a/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4212-tab3.dtsi
@@ -540,8 +540,6 @@ wm1811: audio-codec@1a {
 		clock-names = "MCLK1", "MCLK2";
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		interrupt-parent = <&gpx3>;
-		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
 
 		gpio-controller;
 		#gpio-cells = <2>;

-- 
2.45.2





[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux for Synopsys ARC Processors]    
  • [Linux on Unisoc (RDA Micro) SoCs]     [Linux Actions SoC]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  •   Powered by Linux